Ade30rgs171tw01 Parts

Fix a dryer that won't heat or leaves clothes damp. This heating element restores proper drying. Simple DIY repair with online video guides.

Dryer cylinder belt transmits motor power to spin the drum. Replace if belt is worn, frayed, or broken causing drum not to turn. Verify fit with model number.

Drum roller kit for Speed Queen dryers (1992-newer). Includes rollers and axles that support smooth drum rotation. Replace when worn or broken.

Dryer blowing cold air or not heating? This limit thermostat monitors drum temperature and controls the heating element. Common fix for temperature issues.

Dryer won't heat or start? A failed thermal fuse assembly cuts power when temps get too high. Common fix for no-heat issues. Takes 30-45 minutes.

The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.

Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time. 

Symptoms of a bad knob assembly include:

• Knobs or buttons that do not select cycles properly   
• Faulty digital displays for time and settings
• Erroneous buzzers or error messages
• Unresponsive or stuck control functions

This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
 

Dryer not heating? This heating element generates the heat needed to dry clothes effectively. DIY-friendly repair with moderate difficulty.

The Spring Idler is an OEM replacement part for Speed Queen residential clothes dryers. It works with the dryer drum to facilitate the controlled tumbling of laundry items during the drying cycle. Proper functioning is important for efficiency and effectiveness.

Causes of a bad spring idler can include material fatigue from years of repetitive use. It can also result from overloading the dryer with excessively heavy wet loads that put abnormal stress on the idler mechanism.

Symptoms of a failed spring idler include:

• The dryer drum not rotating smoothly
• Clothing failing to tumble freely and wrinkling instead
• Prolonged drying cycles and increased energy use
• Noisy squeaking or creaking emanating from inside the dryer

As the mechanism responsible for facilitating optimal tumbling, this OEM Speed Queen replacement idler spring restores smooth and efficient dryer operation.

Perforated outlet cover for Speed Queen dryers. Protects the exhaust system while allowing airflow. Replace if cracked, melted, or damaged.

Maintains tension on the drive belt. Replace if the wheel is cracked, bearing is worn, or assembly is broken to restore smooth, quiet drum rotation.

Drum glide kit reduces friction for smooth, quiet dryer operation. Replace if drum doesn't turn freely or makes grinding/squealing noises. Confirm fit.

Restore consistent heat with this 5350-watt dryer heater assembly. Replacing a failed element brings back proper drying temperatures so loads finish on time, using the OEM orange-coded configuration specified for select machines.

• Heats the air in electric drying cycles by energizing the element inside the heater housing
• Common fix for no heat, very long dry times, or lukewarm exhaust air
• Replaces a broken/open heating coil; visible breaks or no continuity indicate failure
• Orange-coded assembly matches the specific OEM configuration—verify against your original or IPL

• Disconnect power and allow the appliance to cool before servicing
• Note wire positions; transfer any thermostats/limit devices from the old assembly if your model uses separate components
• Handle by the frame—avoid touching or deforming the bare heating coil
• After installation, clean lint passages and verify proper vent airflow to prevent premature element failure

This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.

Idler lever assembly with bearing and wheel for dryers. Maintains belt tension for smooth drum rotation. Replace if cracked, worn, or causing squeaking.

Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.

Dryer not heating or not getting hot enough? The cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most users.