Ade3lrgs171tw01 Parts

A replacement self-tapping screw used to secure plastic trim and sheet-metal panels on laundry equipment. Durable washer-head design helps distribute load and resist pull-through in plastic mounting points. What it does

• Fastens panels, trim pieces, and components where a short sheet-metal screw is required
• Self-tapping tip forms threads in plastic or thin metal for a secure hold
• Washer-style head spreads clamping force to reduce damage to plastic parts
• Common repair for missing, stripped, or broken mounting screws that cause loose panels or rattling

• One self-tapping screw (12-16 x 0.562 in) with hex washer head

• Use the correct screwdriver or low-torque driver to avoid over-tightening into plastic
• Start by hand-threading, then finish with short, controlled driver pulls
• Disconnect power and follow all safety guidance for the appliance before servicing
• Replace any damaged mating threads or inserts to ensure a secure repair

This right-hand white panel end replaces a damaged or worn side cap to restore the washer's appearance and keep the cabinet edge protected. It fits the machine's front panel area and matches factory styling. What it does:

• Covers and protects the right-hand side edge of the front cabinet or console
• Restores the unit's finished appearance after damage, scratches, or missing trim
• Helps prevent exposure of internal edges and wiring along the cabinet side
• Matches factory color and mounting locations for a clean replacement

• Remove power and disconnect the appliance before beginning any repair.
• Minor disassembly of the front panel or console may be required to access mounting tabs.
• Handle edges carefully to avoid cutting yourself or scratching the finish.
• Replace missing or damaged fasteners with matching hardware for secure fit.

This washer cylinder baffle mounts to the inner basket and lifts garments as the basket turns. Replacing a cracked, loose, or missing baffle restores proper turnover, reduces banging noises, and helps prevent fabric snags.

• Lifts and tumbles clothes for effective wash action
• Helps distribute the load to minimize imbalance and noise
• Guides garment movement for consistent wash action
• Common failure symptoms: loose or missing baffle, rattling/banging sounds, clothes catching or excessive wear

• Disconnect power and shut off water before servicing; wear cut-resistant gloves
• Open the door and rotate the basket to access the baffle fasteners; support the baffle while removing screws
• Align the new baffle with the keyed slots/holes and tighten the screws securely
• Manually rotate the basket to confirm clearance, then run a short test cycle to verify smooth operation

This genuine bracket secures a component inside your appliance cabinet, keeping it aligned and stable so the machine runs smoothly. Replace a bent, cracked, or stripped bracket to restore proper fit and prevent vibration, rubbing, and rattling.

• Provides a rigid mounting point for the specified assembly in your model
• Maintains correct position and spacing between parts
• Helps prevent vibration, rattling, and rubbing noises
• Replace if bent, cracked, or the mounting holes are stripped
• Common symptoms include loose/misaligned parts, unusual noises, or components not staying secured

• Unplug the appliance; shut off gas or water supply if applicable
• Support the attached component while removing fasteners
• Note orientation (take a photo) and transfer any clips/spacers from the original bracket if present
• Tighten fasteners evenly and verify alignment/clearances before use

This wiring harness connects a homestyle 240V laundry appliance's power and internal wiring, providing a reliable plug-and-play link between the power source and the machine's components. It replaces damaged or worn harnesses to restore safe electrical connections. What it does:

• Routes 240V power to the appliance's internal circuits and controls
• Replaces frayed, burned, or broken wiring that can cause power loss or intermittent operation
• Prevents loose or corroded connections that can lead to arcing or component failure
• Useful when the appliance has no power, trips breakers, or shows electrical faults related to wiring

• One homestyle 240V wiring harness

• Disconnect all power at the breaker before inspecting or replacing the harness — 240V is lethal
• Compare connectors and wire colors to the original harness; swap only when you confirm a match
• Secure harness routing away from moving parts and heat sources to avoid chafing

This door seal creates a tight, protective barrier around the dryer door to help contain heat, airflow and lint for efficient drying and safer operation. It replaces worn or torn seals that let air escape or allow excess lint buildup. What it does:

• Seals gap between the door and cabinet to maintain proper airflow and drying temperature
• Helps prevent lint, dust and small items from escaping the drum area
• Reduces heat loss that can lengthen dry times or lower performance
• Stops drafts and minimizes air leaks that can cause uneven drying

• Disconnect power before beginning any service to avoid shock or injury
• Remove the door and/or access panel per your model's service instructions to reach the seal
• Inspect the door frame and mating surfaces; clean away lint and residue before installing the new seal
• If clips or adhesive are used in your model, replace or resecure them per manufacturer guidance

This replacement knob assembly with skirt restores a secure, easy-to-turn control interface on the appliance. It provides a finished look while allowing reliable selection of settings. What it does:

• Replaces a cracked, stripped, or missing control knob to restore user control
• Provides a stable grip and tactile feedback when turning settings
• Helps prevent accidental slips or selector misalignment caused by worn knobs
• Matches the original mounting style for a direct-fit replacement

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the old knob by pulling straight off the control shaft; install the new knob by aligning and pushing fully onto the shaft
• If the original used a retaining clip or set screw, verify and reinstall it; only use parts explicitly included

This replacement rubber foot cushions the machine's contact point with the floor to improve stability, reduce vibration, and protect surfaces. Replace a worn or missing foot to restore steadier, quieter operation and easier leveling.

• Provides a cushioned, non-slip contact point between the appliance and floor
• Helps absorb vibration and reduce rattling or movement during cycles
• Aids in proper leveling and overall stability
• Replace when cracked, flattened, or missing, or if the unit rocks or "walks"

• Disconnect power; for washers, also turn off water. If applicable, shut off gas supply
• Carefully tilt or raise the appliance with assistance and proper lifting support
• Remove the worn foot and install the new foot on the leveling leg or base as designed, ensuring it seats fully
• Re-level the appliance and tighten any locknuts; verify stable operation

A clear silicone adhesive/sealant used to bond and seal appliance trim and components, helping restore watertight and stable assemblies. Supplies a durable, flexible hold for small repairs where factory adhesive is specified. What it does:

• Bonds trim, panels, and small plastic or metal parts to prevent movement and leaks
• Seals gaps to reduce water intrusion around housings and door areas
• Provides a flexible, durable hold that resists vibration and temperature changes
• Useful for reattaching trim, tabs, and molded parts when original adhesive has failed

• One (1) clear 3 oz tube of DOW 737 adhesive

• Use in a well-ventilated area; wear gloves and eye protection to avoid skin/eye contact
• Surface must be clean, dry, and free of oils or old adhesive for best adhesion
• Apply as a thin, even bead; allow recommended cure time before reassembling or using appliance
• Follow any OEM repair instructions and local disposal guidance for adhesive containers

This is a replacement self-tapping screw used to fasten plastic and sheet-metal trim on Speed Queen laundry appliances. It restores secure mounting for panels and components that rely on factory fasteners. What it does:

• Secures control panels, trim pieces, and housing where a self-tapping fastener is required
• Replaces missing or damaged screws that cause loose or rattling panels
• Restores factory fit to prevent gaps and interference during operation
• Simple hardware fix to stop minor vibration-related noises

• Use the factory screw location and proper driver to avoid stripping; apply steady pressure while driving
• Tighten until snug—do not over-torque plastic or thin sheet-metal to prevent cracking
• Disconnect power before working near electrical components or control panels
• Replace all affected screws for uniform fit

This grill door liner is the inner-facing trim piece that restores the dryer/grill door's appearance and protects the door opening from wear. It replaces cracked, warped, or discolored liners to give a clean, finished look. What it does:

• Covers and protects the door opening edge from heat, lint, and everyday wear
• Restores a smooth, uniform interior door surface after damage or discoloration
• Helps keep the door seal area aligned and reduces gaps where lint or debris can collect
• Improves appliance appearance when the original liner is cracked, warped, or peeling

• One grill door liner (white)

• Designed to fit the original mounting points; inspect existing hardware and retain any reusable clips/screws
• Turn off and unplug the appliance before starting work; allow surfaces to cool
• Use basic hand tools; avoid forcing the liner into place to prevent cracking

This wave washer is a spring-style spacer used in washer assemblies to apply tension and maintain proper spacing. It controls endplay so parts fit securely and the machine runs smoothly with reduced vibration and noise during wash and spin cycles.

• Provides spring preload to maintain correct spacing in rotating assemblies
• Helps limit endplay that can cause rattling, chatter, or intermittent engagement
• Can help address symptoms like metallic noises, excessive play/wobble, or rough operation during agitation or spin
• Replace if the original washer is flattened, cracked, or missing

• Disconnect power and turn off water before servicing
• Note the exact stack order and orientation of spacers/shims during disassembly
• Install the new wave washer in the same orientation; do not bend or deform it
• Reassemble and hand-rotate components to check for smooth operation before test-running

This white baffle cylinder is the replaceable tub/agitator baffle that helps move and separate laundry during the wash cycle for proper cleaning action. It restores agitation and water flow when the original baffle is worn or damaged. What it does:

• Channels water and works with the agitator/tub to help move clothes for improved washing action
• Helps reduce tangling and keeps items circulating through the wash zone
• Replaces cracked, broken, or excessively worn baffles that cause poor agitation or noisy operation
• Matches the original white finish for a factory appearance

• Disconnect power and water supply before beginning any repair
• Basic tools typically required; may need to remove agitator or access cap—refer to your model's service manual
• Inspect mating surfaces and fasteners; replace any worn hardware and ensure proper seating to avoid agitation issues

This clamp motor mount secures the washer motor to the cabinet, helping stabilize the motor and reduce vibration for smoother operation. It replaces worn or damaged motor mounting clamps to restore proper motor alignment and support. What it does:

• Holds the motor firmly to the washer frame to prevent movement during operation
• Helps minimize motor vibration and noise caused by loose mounting
• Keeps motor position correct to prevent belt and pulley misalignment
• Reduces wear on motor mounts and related hardware when functioning properly

• Disconnect power and unplug the appliance before beginning any repair
• Access may require removing the washer cabinet or rear access panel; follow OEM service instructions
• Inspect surrounding mounting hardware and replace any damaged bolts, clips, or grommets
• Tighten securely but avoid over-torquing;

This galvanized dryer cylinder assembly replaces the drum that holds clothes and directs airflow for efficient tumbling and drying. Designed as a direct-fit replacement to restore drum integrity and proper rotation. What it does:

• Replaces a worn, dented, or corroded dryer drum to prevent fabric damage and restore normal tumbling
• Provides the rotating surface that carries clothes through the dryer's airflow path
• Helps maintain proper drum alignment and reduces rubbing noises from a damaged drum
• Restores an even tumbling action that can improve drying consistency

• Intended for DIYers; refer to your service manual for model-specific instructions
• Disconnect power and gas before beginning service to avoid shock or fire hazards
• Inspect and replace related wear items (drum seals, rollers, glides, or belt) if they show wear during installation
• Handle the drum carefully to avoid sharp edges and to protect the painted/galvanized finish

This heater duct assembly routes heated air from the dryer's heating unit to the drum so your loads dry efficiently and evenly. It replaces a damaged or obstructed duct to restore proper airflow and drying performance. What it does

• Channels hot air from the heating element into the drum for consistent drying.
• Restores airflow if a cracked or broken duct was leaking heat inside the cabinet.
• Helps address symptoms like reduced drying performance or longer cycle times.
• Prevents heat loss that can cause the dryer to run inefficiently.

• Disconnect power (unplug electric or shut off gas and unplug) before beginning any repair.
• High-level access may require removing the dryer's front or top panel; use basic hand tools and follow the dryer's service manual.
• Inspect surrounding seals and fasteners; replace any damaged clips or gaskets for a proper fit.
• Never operate the dryer with the duct disconnected or obstructed; ensure lint is cleared before reassembly.