Ade3lrgs171tw01 Parts

This LED cylinder light assembly restores bright, reliable illumination inside the drum, making loading and unloading easier. Replacing a failed or flickering light module brings back clear visibility and helps prevent small items from being left behind.

• Illuminates the interior drum/cylinder when the door is opened or during designated cycle stages (varies by model)
• Common fix for no interior light, dim light, or intermittent/flickering light
• 120V LED design provides consistent, dependable lighting
• Connects to the factory wiring harness on applicable units

Includes: One LED cylinder light assembly.

• Disconnect power to the appliance before servicing
• Access the light location; the assembly mounts at the drum/cylinder opening
• Reconnect wiring securely and route away from moving parts; reuse existing mounting hardware if required
• Test light operation before fully reassembling panels

The Output Control Board Assembly is an OEM part for SpeedQueen dryers. It is responsible for controlling various electrical functions during the drying cycle, such as motor operation, temperature monitoring, and timing functions.

Causes of a bad output control board can include component failures due to wear and tear over time, exposure to moisture or excess heat, or shorts in the circuitry from power surges or improper maintenance.

Symptoms of a bad output control board include:

• The dryer not turning on or functioning
• Incorrect or no heat being produced
• Fault codes appearing on the display
• Improper drying times or continuous cycling
• Intermittent operation

The Heater Assembly Wire is an OEM component specifically designed for Speed Queen commercial and industrial washing machines. The heater assembly wire works with electronic controls to rapidly heat water on demand. This allows different cycles to use water temperatures best suited to each load type. Precise heating saves energy and leads to more consistent cleaning and rinsing results.

Symptoms of a bad heater assembly wire include:

• Inability to heat water effectively or reach required temperatures
• Fluctuations in temperature readings and unstable heating
• Error codes related to heating issues displayed  

Causes are typically cracks, corrosion or breaks in the heating element over extended usage. 

A replacement wedge for the door handle that restores a secure grip and smooth door operation. Fits the white trim area of the handle assembly to replace cracked, broken, or worn wedges and improve door feel. What it does:

• Replaces a damaged or missing wedge piece that holds the door handle trim in position.
• Restores a stable gripping surface so the door opens and closes without slipping.
• Helps correct symptoms such as a loose, cracked, or partially detached handle wedge.
• Matches the white finish used on the handle trim for a consistent appearance.

• One white wedge door-handle piece as shown

• Disconnect power to the appliance before starting any repair.
• Installation typically requires basic hand tools; remove the handle/trim to access the wedge.
• Align the wedge and snap or fasten into place without forcing; avoid over-tightening fasteners.

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

This heater assembly replaces a failed dryer heating element pack to restore normal drying performance. Designed as a direct-fit replacement to deliver the specified 5000 W heating output for compatible commercial/residential dryer units. What it does:

• Provides the heating element and mounted components that produce the dryer's heat.
• Replaces worn or open heater elements that cause no heat or reduced heat.
• Helps resolve long dry times, clothes remaining damp after a cycle, or intermittent heating.
• Includes the assembled heater components for a straightforward swap when the assembly is confirmed faulty.

• One complete red 5000 W heater assembly.

• Disconnect power at the breaker or unplug the dryer before starting service to avoid shock.
• Verify the dryer is cool and for access and removal steps.
• Inspect related components (thermal fuses, thermostats, wiring) for faults when replacing the heater.

A black rocker switch used to control power or function circuits on compatible Speed Queen appliances. Replaces a worn or broken rocker to restore reliable on/off or selection operation and improve user control. What it does:

• Acts as the user-facing actuator that opens and closes electrical contacts when pressed
• Re-establishes circuit connection for affected control functions (power, cycle selection, etc.)
• Common symptom of failure: switch feels stuck, loose, or does not click/respond
• Also replaced when housing or actuator shows visible damage or excessive wear

• One black rocker switch

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Access may require removing the control panel; handle surrounding trim carefully to avoid damage
• Inspect switch mounting and wiring; replace only with matching part to ensure proper fit and function

This dryer steam nozzle directs steam into the dryer drum to help remove wrinkles and refresh fabrics. It replaces a worn or damaged nozzle to restore proper steam flow and steaming performance. What it does:

• Channels steam from the boiler/steam supply into the drum for wrinkle-release and fabric refreshing
• Helps ensure steam is delivered where intended instead of leaking or dispersing inefficiently
• Supports normal dryer steam functions when installed correctly

• One dryer steam nozzle

• Install only after disconnecting power and shutting off steam/water supply; follow OEM service instructions
• Inspect surrounding fittings, hoses, and gaskets for wear and replace if needed
• Use appropriate tools and torque; avoid overtightening which can crack plastic or damage threads

This is a 8-16 x 5/8 tapping screw with a #6 Phillips drive, used to fasten panels and components on compatible appliances. It provides a secure, low-profile hold for trim, brackets and covers. What it does:

• Secures panels, trim pieces, brackets or small components to the appliance frame
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps maintain proper alignment and fit of exterior or interior panels
• Provides a threaded connection in sheet metal or tapped holes

• Use the correct #6 Phillips screwdriver or bit to avoid stripping the head
• Start threading by hand to ensure alignment, then tighten until snug — do not overtighten
• Replace stripped or damaged screws to ensure secure fastening
• Wear eye protection and disconnect power to the appliance before working on components

A replacement galvanized front bulkhead assembly with light opening that restores the washer's cabinet front and supports the door and control area. Replaces a damaged or corroded front panel to help maintain proper door alignment and cabinet integrity. What it does

• Provides the front cabinet support and mounting surface for the door and related hardware
• Includes the light opening for washer interior/accessory lights or indicators
• Restores proper door seal alignment and front-end rigidity after collision or corrosion damage
• Helps stop water intrusion and reduces vibration caused by a bent or weakened front panel

• One galvanized front bulkhead assembly with light opening

• Panel removal may require disconnecting power and detaching door, trim, and controls
• Disconnect power and shut off water before starting work to avoid shock or injury
• Handle edges carefully — metal panels can have sharp edges; wear gloves and eye protection
• Verify alignment and fastener torque during reassembly; test a short wash cycle to confirm proper operation

This 8-inch orange jumper wire provides a short, insulated connection between terminals in the washer's control or wiring harness, restoring a reliable electrical path for proper operation and diagnostics. What it does

• Bridges two terminals to complete a circuit or bypass a failed trace in the wiring harness.
• Restores power to a component when a broken or damaged wire is the cause.
• Useful for testing or replacing a short segment of harness wiring without replacing the entire loom.
• Can help eliminate intermittent faults caused by corroded or loose terminal connections.

• One 8" orange insulated jumper wire.

• Always disconnect power to the appliance before testing or installing wiring.
• Verify terminal locations and correct polarity before making connections.
• Use proper crimp connectors or solder and heat-shrink to secure joints; avoid exposed conductors.
• Route and secure the jumper away from moving parts, high-heat areas, and pinch points.