Ade8060 Parts

This bulkhead light assembly replaces the interior service light on commercial laundry machines, restoring illumination for easier loading and maintenance access. It's a direct-fit service kit designed for quick replacement. What it does:

• Replaces a burned-out or flickering bulkhead/service light
• Restores interior visibility for loading, unloading, and troubleshooting
• Replaces a cracked or damaged light housing or lens that lets moisture in
• Helps eliminate unexpected dark or dim compartment lighting

• Disconnect power to the machine before starting any work to avoid shock
• Remove access panels or bulkhead cover per the service manual to reach the light assembly
• Handle the lens and bulb carefully; ensure proper seating and secure fasteners

This front panel replaces a cracked, worn, or damaged control console face to restore the appliance's appearance and protect the control components. It provides a clean mounting surface for the console controls and switches. What it does:

• Covers and protects the control area from spills, dust, and physical damage
• Restores a finished, factory look when the original panel is dented, scratched, or broken
• Helps keep buttons and switches aligned and accessible for normal operation
• Commonly replaced when the panel is cracked, warped, or cosmetically damaged

• Disconnect power to the appliance before starting any work
• Remove the console trim and mounting screws to access and replace the front panel
• Handle panels carefully to avoid scratching or bending during installation
• Reconnect power and verify controls operate correctly after installation

This rear bulkhead assembly provides the rear tub support and a watertight seal to keep washer water contained and flowing correctly. It replaces a damaged or leaking rear housing to stop rear leaks and restore proper tub alignment. What it does:

• Seals the rear of the inner tub to prevent water from leaking at the back of the washer
• Supports and aligns the tub to help maintain smooth spinning and prevent rubbing
• Directs drain and rinse water flow toward the pump and drain path
• Helps reduce water dripping onto the cabinet floor or rear-facing components

• Disconnect power and turn off water supply before beginning any repairs.
• Typical access requires removing the washer top or rear panel; follow the OEM service manual for your model.
• Inspect surrounding gaskets, hoses, and fasteners for wear and replace if needed.
• Ensure the sealing surface and lip are clean and fully engaged during reassembly to prevent leaks.

This access panel assembly covers the washer's service area to protect internal components and give technicians a safe, removable entry point for maintenance. It restores the cabinet's exterior and keeps wiring and parts enclosed. What it does:

• Replaces a missing, dented, or damaged access panel to secure internal components
• Provides a removable service opening for accessing controls, valves, and wiring
• Helps stop debris and lint from reaching internal parts
• Reduces noise and vibration caused by loose or damaged panels
• Restores the appliance's finished appearance and safety

• Disconnect power and water supply before starting any service
• Typical installation requires removal of a few screws; use basic hand tools
• Handle edges carefully; panels can have sharp metal edges

A one-piece rolled exhaust duct that routes dryer exhaust and lint from the appliance to the home vent. Durable sheet-metal construction keeps airflow consistent and helps maintain dryer performance. What it does:

• Channels hot, moist air and lint from the dryer to the external vent
• Prevents exhaust air from leaking into the laundry area
• Helps reduce lint buildup in the cabinet and transition ducting
• Supports proper airflow to improve drying consistency and odor control

• One one-piece rolled exhaust duct

• Disconnect power (and shut off gas supply for gas dryers) before servicing
• Inspect surrounding venting and housing; replace if crushed or heavily corroded
• Secure with the proper clamps or fasteners and maintain an unobstructed, smooth airflow path
• Follow the dryer manufacturer's venting guidelines and local codes

Felt pad.

Right hand side. For the drum glide and felt pad order LA-1006.

This 10-32 x 3/8 machine screw secures panels and components in many appliances where a small, threaded fastener is required. It replaces stripped, missing, or loose screws to restore stable assembly and reduce vibration. What it does:

• Fastens panels, brackets, and small components using 10-32 unified threads
• Restores secure mounting when screws are missing, stripped, or loose
• Helps stop rattling, misalignment, and intermittent part contact caused by loose fasteners
• Works wherever a 10-32 x 3/8 machine screw is specified by the manufacturer

• Disconnect power or unplug the appliance before servicing
• Use the correct size screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the same size and thread spec to ensure proper fit and function

This LED cylinder light assembly restores bright, reliable illumination inside the drum, making loading and unloading easier. Replacing a failed or flickering light module brings back clear visibility and helps prevent small items from being left behind.

• Illuminates the interior drum/cylinder when the door is opened or during designated cycle stages (varies by model)
• Common fix for no interior light, dim light, or intermittent/flickering light
• 120V LED design provides consistent, dependable lighting
• Connects to the factory wiring harness on applicable units

Includes: One LED cylinder light assembly.

• Disconnect power to the appliance before servicing
• Access the light location; the assembly mounts at the drum/cylinder opening
• Reconnect wiring securely and route away from moving parts; reuse existing mounting hardware if required
• Test light operation before fully reassembling panels

This timer conversion kit adapts an older-style washer timer to the RS-style timer configuration so the machine accepts the newer control. It lets you replace an obsolete timer assembly without changing the whole harness or timer module. What it does:

• Provides the mechanical adapter and hardware needed to convert an older timer mounting to the RS-style timer
• Enables proper alignment and secure mounting for the replacement RS-style timer
• Helps restore timer selector function when the original timer mounting or interface is incompatible with RS-style replacements
• Addresses symptoms such as a replacement timer that won't mount correctly, loose or misaligned timer, or selector knob not engaging

• Always unplug the appliance before beginning any repair to avoid electric shock
• Basic hand tools are typically required; follow the OEM instructions for correct orientation and fastener torque

The Output Control Board Assembly is an OEM part for SpeedQueen dryers. It is responsible for controlling various electrical functions during the drying cycle, such as motor operation, temperature monitoring, and timing functions.

Causes of a bad output control board can include component failures due to wear and tear over time, exposure to moisture or excess heat, or shorts in the circuitry from power surges or improper maintenance.

Symptoms of a bad output control board include:

• The dryer not turning on or functioning
• Incorrect or no heat being produced
• Fault codes appearing on the display
• Improper drying times or continuous cycling
• Intermittent operation

The Heater Assembly Wire is an OEM component specifically designed for Speed Queen commercial and industrial washing machines. The heater assembly wire works with electronic controls to rapidly heat water on demand. This allows different cycles to use water temperatures best suited to each load type. Precise heating saves energy and leads to more consistent cleaning and rinsing results.

Symptoms of a bad heater assembly wire include:

• Inability to heat water effectively or reach required temperatures
• Fluctuations in temperature readings and unstable heating
• Error codes related to heating issues displayed  

Causes are typically cracks, corrosion or breaks in the heating element over extended usage.