Ade8060 Parts

This wiring harness connects a homestyle 240V laundry appliance's power and internal wiring, providing a reliable plug-and-play link between the power source and the machine's components. It replaces damaged or worn harnesses to restore safe electrical connections. What it does:

• Routes 240V power to the appliance's internal circuits and controls
• Replaces frayed, burned, or broken wiring that can cause power loss or intermittent operation
• Prevents loose or corroded connections that can lead to arcing or component failure
• Useful when the appliance has no power, trips breakers, or shows electrical faults related to wiring

• One homestyle 240V wiring harness

• Disconnect all power at the breaker before inspecting or replacing the harness — 240V is lethal
• Compare connectors and wire colors to the original harness; swap only when you confirm a match
• Secure harness routing away from moving parts and heat sources to avoid chafing

This cabinet top clip is a small plastic retainer that secures the appliance's top/cabinet to the chassis, keeping the cabinet aligned and preventing movement or rattling. It restores a flush fit between the cabinet and body. What it does:

• Secures the top/cabinet panel to the appliance frame so the cabinet stays in place
• Prevents the cabinet from shifting, vibrating, or sitting unevenly
• Helps stop gaps that can let dirt or moisture into cabinet seams
• Common symptom: loose, rattling, or misaligned cabinet top or trim

• One cabinet top clip

• Always disconnect power before servicing the appliance
• Remove necessary trim or panels to access the cabinet clip; a screwdriver or trim tool may be needed
• Replace broken or worn clips with matching parts only; inspect surrounding fasteners for damage

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

This replacement knob assembly with skirt restores a secure, easy-to-turn control interface on the appliance. It provides a finished look while allowing reliable selection of settings. What it does:

• Replaces a cracked, stripped, or missing control knob to restore user control
• Provides a stable grip and tactile feedback when turning settings
• Helps prevent accidental slips or selector misalignment caused by worn knobs
• Matches the original mounting style for a direct-fit replacement

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the old knob by pulling straight off the control shaft; install the new knob by aligning and pushing fully onto the shaft
• If the original used a retaining clip or set screw, verify and reinstall it; only use parts explicitly included

This genuine bracket secures a component inside your appliance cabinet, keeping it aligned and stable so the machine runs smoothly. Replace a bent, cracked, or stripped bracket to restore proper fit and prevent vibration, rubbing, and rattling.

• Provides a rigid mounting point for the specified assembly in your model
• Maintains correct position and spacing between parts
• Helps prevent vibration, rattling, and rubbing noises
• Replace if bent, cracked, or the mounting holes are stripped
• Common symptoms include loose/misaligned parts, unusual noises, or components not staying secured

• Unplug the appliance; shut off gas or water supply if applicable
• Support the attached component while removing fasteners
• Note orientation (take a photo) and transfer any clips/spacers from the original bracket if present
• Tighten fasteners evenly and verify alignment/clearances before use

This door seal creates a tight, protective barrier around the dryer door to help contain heat, airflow and lint for efficient drying and safer operation. It replaces worn or torn seals that let air escape or allow excess lint buildup. What it does:

• Seals gap between the door and cabinet to maintain proper airflow and drying temperature
• Helps prevent lint, dust and small items from escaping the drum area
• Reduces heat loss that can lengthen dry times or lower performance
• Stops drafts and minimizes air leaks that can cause uneven drying

• Disconnect power before beginning any service to avoid shock or injury
• Remove the door and/or access panel per your model's service instructions to reach the seal
• Inspect the door frame and mating surfaces; clean away lint and residue before installing the new seal
• If clips or adhesive are used in your model, replace or resecure them per manufacturer guidance

A replacement cord lead-in that routes incoming power into the appliance and provides a secure connection point for the main wiring. Restores reliable electrical feed and helps eliminate intermittent power or no-power issues. What it does:

• Transfers household power from the external cord to the appliance's internal wiring
• Provides a stable inlet connection and strain relief for the incoming power cable
• Commonly replaced for symptoms such as no power, intermittent power, blown fuses, or visible damage/corrosion at the inlet
• Matches OEM fit and mounting for a direct replacement when the part number is correct

• One cord lead-in assembly

• Disconnect all power at the breaker or unplug the appliance before starting work
• Route wires and secure strain relief per OEM guidance; tighten terminal connections firmly but do not overtighten
• If wiring or terminal damage is present, replace or repair per local electrical code

This replacement rubber foot cushions the machine's contact point with the floor to improve stability, reduce vibration, and protect surfaces. Replace a worn or missing foot to restore steadier, quieter operation and easier leveling.

• Provides a cushioned, non-slip contact point between the appliance and floor
• Helps absorb vibration and reduce rattling or movement during cycles
• Aids in proper leveling and overall stability
• Replace when cracked, flattened, or missing, or if the unit rocks or "walks"

• Disconnect power; for washers, also turn off water. If applicable, shut off gas supply
• Carefully tilt or raise the appliance with assistance and proper lifting support
• Remove the worn foot and install the new foot on the leveling leg or base as designed, ensuring it seats fully
• Re-level the appliance and tighten any locknuts; verify stable operation

This white baffle cylinder is the replaceable tub/agitator baffle that helps move and separate laundry during the wash cycle for proper cleaning action. It restores agitation and water flow when the original baffle is worn or damaged. What it does:

• Channels water and works with the agitator/tub to help move clothes for improved washing action
• Helps reduce tangling and keeps items circulating through the wash zone
• Replaces cracked, broken, or excessively worn baffles that cause poor agitation or noisy operation
• Matches the original white finish for a factory appearance

• Disconnect power and water supply before beginning any repair
• Basic tools typically required; may need to remove agitator or access cap—refer to your model's service manual
• Inspect mating surfaces and fasteners; replace any worn hardware and ensure proper seating to avoid agitation issues

This rear support assembly stabilizes the appliance's rear housing and helps keep internal components aligned for smooth operation and reduced vibration. It restores proper rear-end support to prevent rubbing, noise, and uneven motion. What it does:

• Provides a stable mounting point for the appliance's rear section to maintain alignment
• Reduces vibration and rattling caused by a loose or worn rear support
• Helps prevent rubbing, scraping, or grinding noises from misaligned components
• Restores proper fit between the rear housing and moving parts to promote smooth operation

• One rear support assembly

• Disconnect power (and gas if applicable) before beginning any repair
• Access typically requires removing the appliance's rear panel or cabinet; follow OEM service manual steps
• Inspect surrounding mounting hardware and replace any worn fasteners for a secure fit

This cycle thermostat regulates temperature during appliance heating cycles to help maintain safe, consistent operation and proper cycle performance. It replaces a worn or failed thermostat to restore correct temperature control. What it does:

• Senses and opens/closes at set temperatures to control heating during cycles
• Prevents continuous heating when the thermostat reaches its limit
• Can cause no-heat, overheating, or short cycling when faulty
• Works with the appliance's control system to maintain cycle timing and safety

• Disconnect power to the appliance before inspecting or replacing the thermostat
• Handle thermostat and terminals carefully; avoid bending sensing elements

Package of 12

This is a replacement self-tapping screw used to fasten plastic and sheet-metal trim on Speed Queen laundry appliances. It restores secure mounting for panels and components that rely on factory fasteners. What it does:

• Secures control panels, trim pieces, and housing where a self-tapping fastener is required
• Replaces missing or damaged screws that cause loose or rattling panels
• Restores factory fit to prevent gaps and interference during operation
• Simple hardware fix to stop minor vibration-related noises

• Use the factory screw location and proper driver to avoid stripping; apply steady pressure while driving
• Tighten until snug—do not over-torque plastic or thin sheet-metal to prevent cracking
• Disconnect power before working near electrical components or control panels
• Replace all affected screws for uniform fit

This grill door liner is the inner-facing trim piece that restores the dryer/grill door's appearance and protects the door opening from wear. It replaces cracked, warped, or discolored liners to give a clean, finished look. What it does:

• Covers and protects the door opening edge from heat, lint, and everyday wear
• Restores a smooth, uniform interior door surface after damage or discoloration
• Helps keep the door seal area aligned and reduces gaps where lint or debris can collect
• Improves appliance appearance when the original liner is cracked, warped, or peeling

• One grill door liner (white)

• Designed to fit the original mounting points; inspect existing hardware and retain any reusable clips/screws
• Turn off and unplug the appliance before starting work; allow surfaces to cool
• Use basic hand tools; avoid forcing the liner into place to prevent cracking

This wave washer is a spring-style spacer used in washer assemblies to apply tension and maintain proper spacing. It controls endplay so parts fit securely and the machine runs smoothly with reduced vibration and noise during wash and spin cycles.

• Provides spring preload to maintain correct spacing in rotating assemblies
• Helps limit endplay that can cause rattling, chatter, or intermittent engagement
• Can help address symptoms like metallic noises, excessive play/wobble, or rough operation during agitation or spin
• Replace if the original washer is flattened, cracked, or missing

• Disconnect power and turn off water before servicing
• Note the exact stack order and orientation of spacers/shims during disassembly
• Install the new wave washer in the same orientation; do not bend or deform it
• Reassemble and hand-rotate components to check for smooth operation before test-running

This clamp motor mount secures the washer motor to the cabinet, helping stabilize the motor and reduce vibration for smoother operation. It replaces worn or damaged motor mounting clamps to restore proper motor alignment and support. What it does:

• Holds the motor firmly to the washer frame to prevent movement during operation
• Helps minimize motor vibration and noise caused by loose mounting
• Keeps motor position correct to prevent belt and pulley misalignment
• Reduces wear on motor mounts and related hardware when functioning properly

• Disconnect power and unplug the appliance before beginning any repair
• Access may require removing the washer cabinet or rear access panel; follow OEM service instructions
• Inspect surrounding mounting hardware and replace any damaged bolts, clips, or grommets
• Tighten securely but avoid over-torquing;