Adee9rgs175w01 Parts

This access panel assembly covers the washer's service area to protect internal components and give technicians a safe, removable entry point for maintenance. It restores the cabinet's exterior and keeps wiring and parts enclosed. What it does:

• Replaces a missing, dented, or damaged access panel to secure internal components
• Provides a removable service opening for accessing controls, valves, and wiring
• Helps stop debris and lint from reaching internal parts
• Reduces noise and vibration caused by loose or damaged panels
• Restores the appliance's finished appearance and safety

• Disconnect power and water supply before starting any service
• Typical installation requires removal of a few screws; use basic hand tools
• Handle edges carefully; panels can have sharp metal edges

A one-piece rolled exhaust duct that routes dryer exhaust and lint from the appliance to the home vent. Durable sheet-metal construction keeps airflow consistent and helps maintain dryer performance. What it does:

• Channels hot, moist air and lint from the dryer to the external vent
• Prevents exhaust air from leaking into the laundry area
• Helps reduce lint buildup in the cabinet and transition ducting
• Supports proper airflow to improve drying consistency and odor control

• One one-piece rolled exhaust duct

• Disconnect power (and shut off gas supply for gas dryers) before servicing
• Inspect surrounding venting and housing; replace if crushed or heavily corroded
• Secure with the proper clamps or fasteners and maintain an unobstructed, smooth airflow path
• Follow the dryer manufacturer's venting guidelines and local codes

This black control-panel overlay restores the dryer's front console appearance and button labeling so cycle selections are easy to read and use. It replaces a cracked, faded, or peeling overlay for a cleaner, like-new look. What it does:

• Provides labeled touchpoints and control markings so settings are visible and intuitive
• Protects the underlying control board from spills, dirt and everyday wear
• Replaces torn, bubbled or worn overlays that make buttons hard to read
• Improves console appearance and helps prevent accidental button damage

• Turn off and unplug the dryer (or disconnect power at the breaker) before starting
• Remove the console or control assembly screws to access the old overlay
• Peel off the old overlay, clean the surface, align the new overlay, then press firmly to adhere
• Use basic hand tools only; avoid sharp tools that could damage the overlay or console

This LED cylinder light assembly restores bright, reliable illumination inside the drum, making loading and unloading easier. Replacing a failed or flickering light module brings back clear visibility and helps prevent small items from being left behind.

• Illuminates the interior drum/cylinder when the door is opened or during designated cycle stages (varies by model)
• Common fix for no interior light, dim light, or intermittent/flickering light
• 120V LED design provides consistent, dependable lighting
• Connects to the factory wiring harness on applicable units

Includes: One LED cylinder light assembly.

• Disconnect power to the appliance before servicing
• Access the light location; the assembly mounts at the drum/cylinder opening
• Reconnect wiring securely and route away from moving parts; reuse existing mounting hardware if required
• Test light operation before fully reassembling panels

The Heater Assembly Wire is an OEM component specifically designed for Speed Queen commercial and industrial washing machines. The heater assembly wire works with electronic controls to rapidly heat water on demand. This allows different cycles to use water temperatures best suited to each load type. Precise heating saves energy and leads to more consistent cleaning and rinsing results.

Symptoms of a bad heater assembly wire include:

• Inability to heat water effectively or reach required temperatures
• Fluctuations in temperature readings and unstable heating
• Error codes related to heating issues displayed  

Causes are typically cracks, corrosion or breaks in the heating element over extended usage. 

A replacement wedge for the door handle that restores a secure grip and smooth door operation. Fits the white trim area of the handle assembly to replace cracked, broken, or worn wedges and improve door feel. What it does:

• Replaces a damaged or missing wedge piece that holds the door handle trim in position.
• Restores a stable gripping surface so the door opens and closes without slipping.
• Helps correct symptoms such as a loose, cracked, or partially detached handle wedge.
• Matches the white finish used on the handle trim for a consistent appearance.

• One white wedge door-handle piece as shown

• Disconnect power to the appliance before starting any repair.
• Installation typically requires basic hand tools; remove the handle/trim to access the wedge.
• Align the wedge and snap or fasten into place without forcing; avoid over-tightening fasteners.

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

This is a dryer main control board that is used to manage all of the operations of the appliance, such as temperature and drying time. It allows the user to make changes to the dryer, such as selecting temperatures, dryness, moisture levels, and more. The control board has a variety of small parts and can become damaged. When this occurs, the main control board may no longer work and the dryer may not come on.Several tools, including a small slot screwdriver and a ¼ inch nut wrench are needed to replace this main control board. Make sure the dryer is unplugged and the gas is turned off if appropriate. The dryer will need to be moved away from the wall to take apart the top panel and pull it over the dryer. Note where the wires are before taking the main control board out. The new one can be installed while making sure the wires are placed in the right location.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold individually. The main control board is designed for use with Speed Queen and other brands of dryers.

This dryer steam nozzle directs steam into the dryer drum to help remove wrinkles and refresh fabrics. It replaces a worn or damaged nozzle to restore proper steam flow and steaming performance. What it does:

• Channels steam from the boiler/steam supply into the drum for wrinkle-release and fabric refreshing
• Helps ensure steam is delivered where intended instead of leaking or dispersing inefficiently
• Supports normal dryer steam functions when installed correctly

• One dryer steam nozzle

• Install only after disconnecting power and shutting off steam/water supply; follow OEM service instructions
• Inspect surrounding fittings, hoses, and gaskets for wear and replace if needed
• Use appropriate tools and torque; avoid overtightening which can crack plastic or damage threads

This front bulkhead assembly replaces the dryer or washer front panel that supports the drum and front bearings, restoring proper drum alignment and enclosure. It helps reduce vibration, air leaks, and rubbing that can cause noise or wear. What it does:

• Supports the drum and front bearing to keep the drum centered during operation
• Provides the mounting surface for the door and front seal to maintain proper airflow and closure
• Prevents drum-to-frame contact that can cause squeaks, scraping, or excess vibration
• Helps keep lint and moisture contained in the drum area to protect internal components

• Disconnect power (and water, if applicable) before starting any repair
• Remove the dryer/washer door and front cover to access mounting fasteners; keep hardware for reassembly
• Transfer any door latch, seal, or trim pieces to the new bulkhead as needed
• After installation, recheck drum rotation and clearances; run a short test cycle to confirm quiet operation