Ahe3ar75uc/08 Parts

This is the air filter assembly for select GE room air conditioners. It traps dust and lint before they reach the evaporator coil, helping maintain airflow and cooling performance.

• Captures airborne dust and lint to protect the coil and blower
• Helps maintain steady airflow and cooling efficiency
• Replace if cracked, warped, missing, or won't stay seated
• Common symptoms include reduced airflow and visible debris on the filter

• Unplug the unit before servicing
• Remove the front grille or filter access panel; slide the old filter out
• Install the new filter with airflow orientation matching the original
• Clean surrounding surfaces and reinstall grille before powering on

This installation assembly secures and positions appliance mounting hardware during setup to restore proper fit and alignment. It replaces damaged or missing installation components so the appliance sits and operates more securely. What it does:

• Secures mounting points and trim so panels and components stay aligned
• Helps prevent movement, rattling, or gaps caused by loose or missing installation hardware
• Restores proper fit during initial installation or after repair
• Works with factory fasteners and brackets to maintain safe appliance positioning

• Disconnect power (and water, if applicable) before starting any work
• Use appropriate hand tools; do not overtighten fasteners to avoid damage
• Follow the appliance's OEM installation instructions
• Secure all fasteners for stable, vibration-free operation

This install kit provides the mounting and sealing components needed to properly install a compatible room air conditioner in a window opening. Replacing a missing or worn kit restores a secure fit and helps reduce drafts, vibration, and water intrusion. What it does:

• Provides the hardware/sealing pieces required to mount the unit in the window opening
• Helps secure the chassis and side panels for safe, stable operation
• Seals perimeter gaps to limit air leaks, dust, and moisture entry
• Common symptoms: missing or damaged installation hardware/side curtains, loose fit, visible gaps/drafts, rattling or excessive vibration

• One installation kit

• Unplug the unit and have a second person support the air conditioner during installation or removal
• Follow the model-specific installation instructions; use appropriate fasteners for your window material
• Ensure the unit is level side-to-side and slightly tilted toward the exterior for proper drainage
• Wear cut-resistant gloves and use caution around sharp metal edges

The Remote Control is an OEM part for GE window air conditioners. It allows convenient wireless operation from across the room.   

Causes of a faulty remote include faded or stuck buttons from heavy usage. Moisture or dust intrusion due to lack of sealing over time can compromise electronics. 

Symptoms of a bad remote control involve:

• Unresponsive or randomly operating buttons  
• Inability to power the unit on or off from a distance
• Range or reception issues where controls don't work
• Missing buttons preventing complete functionality

This GE replacement ensures hassle-free temperature adjustment without approaching the AC unit. Compatible with some Frigidaire, Danby, and Honeywell branded window air conditioners as well. The remote preserves full programming and convenient control when manual overrides are needed at the unit.

The Display and Control Board Assembly is an OEM part for GE window air conditioners. It combines the LED screen display and integrated circuit control board in one comprehensive component.

Symptoms of a faulty display and control assembly include:

• Completely blank or unintelligible screen readings  
• Non-responsive buttons with no temperature display 
• Failure to turn the unit on or off from the controls
• Inability to maintain preset fan speeds or cooling modes

Causes typically involve cumulative exposure to heat, moisture, and humidity over many usage seasons. Condensation or debris intrusion into tightly sealed front panel areas can accelerate the deterioration of sensitive electronics.

This genuine GE replacement restores the unit display's full programming and readout functionality. Compatible with select Frigidaire, Whirlpool, and Danby models.

This main control board manages an appliance's electronic commands and timing to restore normal operation. Replacing a failed board can resolve unresponsive controls and restore proper cycle and display behavior. What it does:

• Controls user interface, cycle selection, timing and communication between electronic components.
• Starts and stops cycles, manages displays and relays, and coordinates other control functions.
• A failed board can cause a blank or unresponsive display, failure to start, intermittent or erratic operation, or incorrect cycle behavior.
• May trigger error codes or disable specific functions when faulty.

• Disconnect power to the appliance before starting; verify power is off at the breaker or unplug the unit.
• Take clear photos or label connectors before removing wiring harnesses to ensure correct reassembly.
• Handle the board by its edges and avoid touching components; observe ESD precautions where possible.

This UI control board is the user-interface module that operates the appliance's front controls and display, restoring responsive touch/button input and readable status feedback for normal operation. What it does:

• Receives and translates button/touch inputs to the appliance control system
• Drives the display and indicator lights so you can view settings and status
• Helps resolve symptoms like unresponsive front controls, blank or garbled display, or intermittent input response
• Works with the main control to send user commands for cooking/cycle selection and timers

• Disconnect power to the appliance before attempting replacement to avoid shock or damage
• Handle the board by the edges and avoid electrostatic discharge; use ESD protection if available
• Reconnect power and test the control functions before fully reassembling the appliance

The Remote Control is an OEM component specifically designed for GE window air conditioners. It provides convenient remote functionality for adjusting cooling settings.

Located outside the air conditioner unit, the remote control wirelessly communicates operational commands to the indoor control board via infrared signals. Features include temperature selection, fan speed control, power on/off, sleep mode, and timer functions. 

Symptoms of a defective remote include:

• Air conditioner fails to respond to remote inputs   
• Shortened remote control battery life than expected
• Remote control stops working or IR signals aren't received

Causes can be related to typical battery depletion over time, physical damage inhibiting signaling circuits, or water damage corrupting printed circuit boards.

Replacing with this authentic GE OEM part restores optimized command convenience. It supports continued comfort customization to complement compatible GE, Frigidaire, or Kenmore window AC units.

This main control board is the refrigerator's electronic control module that manages temperature, defrost cycles and user interface signals so the appliance runs correctly and responds to commands. Replaces a failed or faulty control board to restore normal operation. What it does:

• Receives inputs from the user interface and sensors, then sends control signals to compressors, fans and defrost components
• Manages timed cycles like defrost and compressor run intervals
• Helps regulate temperatures by interpreting thermostat/thermistor signals
• Can cause symptoms such as an unresponsive display, no cooling cycles, constant running compressor, or erratic defrost behavior when it fails

• One main control board

• Disconnect power before starting—this part carries line voltage and can shock if energized
• Handle the board by edges and avoid touching exposed components; use anti-static precautions if available
• Minor wiring or mounting changes may be required; refer to manufacturer service instructions

This replacement refrigerator water filter installs in the dispenser/ice line to help improve water taste and quality. It restores proper filtration for clearer ice and better-tasting drinking water. What it does:

• Replaces a worn or clogged refrigerator water filter assembly to restore normal flow
• Helps reduce common taste and odor issues from chlorine and other particulates
• Fixes symptoms such as slow dispenser flow, off-tasting water, or cloudy ice when the filter is failing
• Returns the appliance to intended inline filtration function used by the dispenser and ice maker

• One replacement refrigerator water filter assembly

• Turn off the refrigerator water supply and run the dispenser to relieve line pressure before removing the old filter
• Follow the refrigerator manufacturer's removal and seating procedure; ensure a proper seal to prevent leaks
• Flush the water line to clear air and loose carbon fines
• If you find continuing leaks or poor flow after install, double-check seating, O-rings, and water supply valve

This air filter screens dust and lint before they reach the evaporator coil, helping keep airflow strong and cooling performance consistent. Replace a clogged, torn, or missing filter to protect the unit and reduce strain.

• Filters incoming air to block dust and lint from the coil
• Helps maintain proper airflow and cooling performance
• Replace when damaged, warped, or heavily soiled
• Common symptoms: weak airflow, longer run times, poor cooling, visible debris on the filter/grille

• Disconnect power before opening the front grille
• Slide out the old filter; insert the new filter in the same orientation until fully seated
• Ensure the grille closes smoothly; never operate the unit without a filter installed

The electronic main control board that manages refrigerator functions and user controls, restoring proper communication between sensors, the display and the compressor system for reliable cooling and operation. What it does:

• Controls and coordinates temperature regulation, defrost cycles and compressor run times.
• Processes inputs from the control panel and sensors to run cooling and ice/water features.
• Symptoms of a failing board may include a blank or unresponsive display, no cooling or irregular cooling cycles, or unreachable controls.
• Replacing the board can resolve intermittent operation and communication faults when other components test good.

• Disconnect power before starting to avoid shock or component damage.
• Handle the board carefully to avoid electrostatic discharge; ground yourself or use an ESD strap.
• Verify model and part number on the existing board before ordering and match connector locations during installation.

This display board is the electronic control/display assembly that powers the oven/range user interface, restoring visible status, clock and touch controls so the appliance responds normally to settings and timer functions. What it does:

• Powers and displays clock, temperature and cycle information on the front control panel
• Receives input from the touchpad/buttons and sends control signals to the range/oven control system
• Common fix for unlit or scrambled displays, non-responsive front controls, or missing clock/timer readouts
• Helps eliminate intermittent or incorrect display messages caused by a failed display/control board

• One display board / control/display assembly (as shown)

• Disconnect power (unplug or shut off breaker) before beginning any service
• Handle the board by the edges; avoid touching components and use anti-static precautions if available
• Carefully disconnect ribbon cables and connector harnesses; note connector locations for reassembly

This replacement air filter restores proper airflow in your room air conditioner by trapping dust and lint before they reach the coil. Replacing a clogged or damaged filter helps the unit cool efficiently and protects internal components.

• Filters incoming air to keep dust and lint from the evaporator coil
• Supports strong airflow and cooling performance
• Helps limit dirt buildup inside the unit
• Replace if torn, missing, or heavily soiled; helps when airflow feels weak from the front grille

• Disconnect power before servicing
• Open or remove the front grille to access the filter slot
• Slide out the old filter; insert the new filter fully seated in the track
• Do not operate the unit without a filter; restore power and check airflow