Awn542sp111two1 Parts

A replacement tub cover gasket assembly that seals the washer tub to help prevent leaks and protect internal components. Restores the tub-to-cover seal so your washer can hold water and operate reliably. What it does:

• Forms a watertight seal between the tub cover and tub to reduce dripping or pooling around the cabinet.
• Helps prevent detergent and soil from entering the cabinet or suspension area.
• Addresses symptoms like visible leaks at the top of the tub, water on the floor near the washer, or a damaged/torn seal.
• Replaces worn or cracked gasket material that can fail over time.

• One tub cover gasket assembly (cover with gasket)

• Disconnect power and turn off the water supply before starting any repair.
• Basic hand tools are typically required; the cover may need to be removed to access the gasket seating area.
• Inspect surrounding clips, fasteners, and sealing surfaces for damage and replace as needed for a complete seal.

This right-hand white panel end replaces a damaged or worn side cap to restore the washer's appearance and keep the cabinet edge protected. It fits the machine's front panel area and matches factory styling. What it does:

• Covers and protects the right-hand side edge of the front cabinet or console
• Restores the unit's finished appearance after damage, scratches, or missing trim
• Helps prevent exposure of internal edges and wiring along the cabinet side
• Matches factory color and mounting locations for a clean replacement

• Remove power and disconnect the appliance before beginning any repair.
• Minor disassembly of the front panel or console may be required to access mounting tabs.
• Handle edges carefully to avoid cutting yourself or scratching the finish.
• Replace missing or damaged fasteners with matching hardware for secure fit.

This small sealing washer fits the washer's water pressure assembly to help maintain a proper watertight seal at the pressure/valve connection. Replacing a worn washer reduces leaks and helps the fill/pressure system operate as intended. What it does

• Provides a watertight seal at the water pressure/valve connection to prevent leaks.
• Helps maintain correct pressure feedback to the washer's water control system.
• Wear or damage can allow leaking at the valve or inconsistent fill behavior.
• Simple, low-cost part commonly replaced when troubleshooting valve leaks.

• Turn off household water supply and unplug the washer before replacing.
• Remove the valve/pressure fitting carefully and replace the old washer with the new one, making sure it seats flat and undamaged.
• Inspect mating surfaces for debris or damage; clean before reassembly.
• If leaks or fill issues persist after replacement, inspect related seals, fittings, and the pressure switch/valve assembly.

This variable pressure switch senses water or air pressure to control washer cycles, restoring reliable level and cycle control. It replaces a worn or failed pressure-sensing controller to help restore normal fill and drain sequencing. What it does:

• Detects pressure changes and signals the washer control to start or stop fill and cycle functions
• Commonly linked to symptoms like overfilling, underfilling, incorrect cycle advancement, or machines that won't detect water level
• Works as the factory replacement pressure-sensing switch used in compatible Speed Queen washers
• Operates as a direct mechanical/electrical pressure sensor (no user calibration required)

• Disconnect power and turn off water supply before beginning any repair
• Handle the pressure hose and electrical connector carefully; ensure hose is routed and secured as OEM for accurate sensing
• Verify fit and function after installation by running a diagnostic or test cycle

This tall-lip seal fits the outer tub to help keep wash water inside the tub and protect internal components from leaks. It replaces a worn or damaged outer tub seal to restore a watertight tub interface. What it does:

• Provides a watertight seal between the outer tub and adjacent components
• Helps prevent water leaks that can cause floor damage or electrical issues
• Reduces noise and vibration caused by an improperly sealed tub
• Commonly replaced when you see visible seal wear, cracking, or recurring leaks

• One tall-lip outer tub seal (seal pack) as specified by the manufacturer

• Disconnect power and water supply before starting any repair
• Inspect mating surfaces and clean away residue before installing the new seal
• Some models may require partial disassembly of the cabinet or tub; follow the OEM service manual

This is a 1/4-15 x 3/4 hex head screw used to secure components in laundry appliances. It provides a strong, threaded fastening point for panels and brackets so parts stay properly aligned during operation. What it does:

• Fastens panels, brackets, or components where a 1/4-15 x 3/4 hex head screw is specified
• Holds assemblies securely to reduce vibration and movement
• Can be used to replace a worn, stripped, or missing screw to restore proper fit
• Matches OEM thread and length for correct engagement when used as specified

• One 1/4-15 x 3/4 hex head screw

• Disconnect power to the appliance before performing any repairs
• Use the correct hex driver/socket to avoid rounding the head
• Tighten snugly but avoid over-torquing to prevent stripping threads or cracking components
• Replace with the exact part if damaged;

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working

This is a 1/4-20 x 9/16 hex flange screw used to secure panels and assemblies on commercial and residential laundry equipment. It provides a durable, threaded fastener that restores proper fit and prevents rattling or loose components. What it does:

• Fastens panels, brackets, and components where a 1/4-20 hex flange screw is specified
• Replaces stripped, corroded, or missing screws that cause loose parts or vibration
• Restores secure connections that can reduce noise and align panels
• Used in areas requiring a flange head for wider bearing surface and resistance to loosening

• One 1/4-20 x 9/16 hex flange screw

• Install with the correct size hex driver or socket; avoid over-tightening to prevent stripping
• Replace any damaged or corroded mating hardware as needed for secure fit
• Disconnect power and follow safety procedures if working near electrical components