Awne9rsn116two1 Parts

This drain pump harness connects the washer's control/power circuits to the drain pump so the pump can run and remove water. Replacing a damaged harness restores reliable electrical connection for proper draining. What it does

• Provides power and signal paths between the control board and drain pump
• Enables the drain pump to run when the washer calls for pump operation
• Commonly associated with symptoms like no drain, intermittent pump operation, or pump not receiving power
• Prevents shorts or intermittent connections caused by frayed wires or damaged terminals

• Disconnect power before starting any repair to avoid shock or injury
• Inspect connectors for corrosion and ensure mating terminals are clean before connecting
• Route harness away from sharp edges, hot surfaces, and moving parts; secure with existing clips or fasteners

This is a 1/4-15 x 3/4 hex head screw used to secure components in laundry appliances. It provides a strong, threaded fastening point for panels and brackets so parts stay properly aligned during operation. What it does:

• Fastens panels, brackets, or components where a 1/4-15 x 3/4 hex head screw is specified
• Holds assemblies securely to reduce vibration and movement
• Can be used to replace a worn, stripped, or missing screw to restore proper fit
• Matches OEM thread and length for correct engagement when used as specified

• One 1/4-15 x 3/4 hex head screw

• Disconnect power to the appliance before performing any repairs
• Use the correct hex driver/socket to avoid rounding the head
• Tighten snugly but avoid over-torquing to prevent stripping threads or cracking components
• Replace with the exact part if damaged;

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working

This drive bell is the rotating cone that connects the washer's drive assembly to the transmission, transferring torque so the tub can agitate and spin properly. Replacing a worn bell restores reliable drive engagement. What it does:

• Couples the motor/drive shaft to the transmission to transfer rotational force
• Helps maintain proper drum rotation for agitating and spinning cycles
• Worn or damaged bell can cause loud knocking, grinding, or vibration during operation
• May lead to intermittent or failed agitation/spin if the drive engagement slips

• Disconnect power and water supply before servicing
• Follow the manufacturer service manual for disassembly and reassembly steps
• Inspect mating shaft, fasteners, and surrounding components; replace any damaged hardware
• Test the machine through a complete cycle after installation to ensure proper operation

A tall service tub kit that replaces the washer's outer tub assembly to restore drum support and reduce leaks or abnormal vibration. Use this kit when the existing tub is cracked, dented, or no longer sealing properly. What it does:

• Replaces the washer's outer/service tub to restore proper drum alignment and containment
• Helps stop water leaks caused by cracked or damaged tubs
• Reduces excessive vibration or wobbling from a failing tub assembly
• Restores a secure mounting surface for seals, bearings and suspension components

• Disconnect power and water and follow all safety precautions before beginning service
• Installation may require removing the cabinet and drum; follow the OEM service manual for step-by-step instructions
• Use appropriate tools and a second person for lifting or aligning heavy components
• Inspect seals, bearings and suspension parts while the tub is exposed and replace as needed

This replacement inlet hose carries water from your household supply to the washer, restoring proper fill and preventing leaks. Use it when the washer fills slowly, won't fill, or shows water leakage at the connection. What it does:

• Channels hot and/or cold water from the household supply to the washer's inlet valve
• Restores normal fill behavior when an old or damaged hose causes slow or no fill
• Stops leaks caused by cracked, split or deteriorated hose sections or fittings
• Helps prevent water damage from a failed or leaking supply connection

• Turn off household water supply and unplug the washer before replacing the hose
• Hand-tighten fittings, then snug with a wrench—do not overtighten to avoid damaging threads
• Inspect and replace any damaged washers or seals at the connections

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

This lid lock wiring harness connects the washer lid lock assembly to the main wiring system, restoring the lid-lock signal for safe operation. It replaces a damaged or worn harness to help ensure the lid locks and unlocks reliably during cycles. What it does

• Provides the electrical connection between the lid lock switch and the washer control board
• Restores lost or intermittent lid-lock function caused by frayed or broken wiring
• Helps prevent the washer from starting or spinning when the lid is open (symptom: washer won't start or stops mid-cycle)
• Supports normal lock/unlock signaling during wash and spin cycles

• One lid lock wiring harness

• Disconnect power before starting — follow all electrical safety precautions
• Inspect connectors for corrosion or damage; replace harness only if matching connector type
• Route wiring clear of sharp edges and moving parts to avoid future wear

This replacement water inlet hose connects the home's water supply to the washer, restoring reliable water flow and preventing leaks at the rear hookup. Use when the original hose is cracked, split, or leaking. What it does:

• Carries incoming water from the fill valve to the tub for normal wash cycles
• Stops leaks caused by worn, cracked, or split inlet tubing
• Helps restore proper water fill when low or no-fill symptoms occur
• Matches OEM routing and connection points for a direct fit

• Disconnect power and shut off the water supply before beginning.
• Inspect and replace any worn clamps or fittings; tighten connections by hand then snug with a tool—do not overtighten.
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks.

A flat-head machine screw sized #8-18 x 0.50 that secures panels, trim and internal components. Small but essential fastener for repairing or reassembling appliance parts to restore proper fit and reduce vibration. What it does:

• Fastens metal or plastic panels, brackets and trim where a countersunk head is required
• Restores secure mounting when original screws are missing, loose or stripped
• Prevents rattling, gaps and misalignment caused by lost hardware
• Matches OEM thread and length for correct seating in designated holes

• Use the proper #2 Phillips or compatible driver to avoid cam-out and damage
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Compare new screw with the original before installation
• Disconnect power and follow appliance safety guidelines before servicing

This replacement porcelain touch-up paint restores small chips, scratches and worn spots on enamel-coated appliance surfaces to help improve appearance and slow surface corrosion. Easy to apply for spot repairs. What it does:

• Covers small chips, scratches and scuffs on porcelain/enamel surfaces
• Helps protect exposed metal from moisture that can lead to surface rust
• Matches factory finish color on compatible porcelain-coated panels (spot repairs only)
• Useful for finishing edges around dings and improving visual appearance

• One bottle of porcelain touch-up paint

• Clean and dry the repair area thoroughly; remove loose paint and rust before applying
• Test paint in an inconspicuous spot to confirm color match and adhesion
• Apply sparingly with a fine brush or applicator; allow recommended drying time between coats
• Keep away from open flame; store and dispose of per local regulations; keep out of reach of children