Bosch Hbl8750/Uc12 Parts

This metal mounting bracket secures internal components and panels to restore proper alignment and reduce rattling. It's a straightforward replacement part that helps keep appliance panels and assemblies firmly in place for reliable operation. What it does:

• Provides a secure attachment point for panels or internal assemblies to prevent movement and vibration
• Helps correct alignment issues that can cause rubbing, gaps, or noise
• Restores the original fit where a bent, cracked, or missing bracket caused loose parts
• Works with the appliance's existing fasteners and mounting points

• Remove power and, if applicable, disconnect the appliance from water before beginning work
• Use the factory fasteners or OEM replacement screws to secure the bracket in the original location
• Verify alignment of the attached panel or assembly before fully tightening fasteners

This cap is a direct-fit replacement closure used to protect and seal an exposed opening or component on compatible Bosch appliances, preventing dirt, moisture and damage for reliable operation. What it does:

• Covers and seals an exposed port or fastener to keep contaminants out
• Protects internal components from moisture and debris that can cause malfunctions
• Replaces cracked, warped or missing caps that allow leaks or debris intrusion
• Restores proper fit and appearance where a damaged cap leaves an opening

• Disconnect appliance power and water supply before starting any repair
• Verify the cap matches the damaged/original part before installation
• Press or snap the cap into place until fully seated; do not force or pry
• Inspect mating surfaces for damage or debris and clean before installing

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

This is a push-button control switch used to complete electrical circuits for appliance functions, restoring responsive button/control operation. It replaces a worn or failed switch to help return normal control-panel behavior. What it does

• Acts as the user-input electrical contact for a specific control or function.
• Completes or breaks the circuit when pressed so the appliance will respond to commands.
• Common symptom: control or button is unresponsive or intermittent.
• Common symptom: the appliance will not start or a function will not engage when the button is pressed.

• One switch.

• Disconnect power before accessing the control panel or wiring to avoid shock.
• Handle the switch and wiring gently to avoid damaging connectors or the control board.

This door latch secures the appliance door during operation so cycles can start and run safely. It replaces a worn or broken latch to restore proper door closure and reliable operation. What it does:

• Holds the door closed so the appliance can begin and complete cycles
• Prevents the door from opening mid-cycle, reducing spills and interruptions
• Replaces a cracked, loose, or non-engaging latch that won't catch
• Helps address symptoms like a door that won't stay closed or causes the unit to not start

• Disconnect power (and water for water-connected appliances) before starting work
• Handle door components carefully to avoid damaging trim or glass
• After installing, test door operation and run a short cycle to confirm proper latch engagement

This replacement interior tray provides a stable surface for holding dishes and components inside the appliance, restoring safe storage and proper water flow. It's a straightforward, direct-fit part for worn, cracked, or damaged trays. What it does

• Replaces a damaged or warped interior tray to restore proper support for dishes and components
• Helps maintain correct water drainage and spray access by holding items in the intended position
• Stops shifting or rattling caused by cracked or broken tray sections
• Useful when visible cracks, breaks, or deformation prevent normal use

• Disconnect power and water before starting work
• Remove surrounding racks or panels for access as needed; handle tray carefully to avoid sharp edges
• Align tray into original mounting points and secure; do not force or modify the part

This support mounting bracket secures internal components to the appliance frame, restoring proper alignment and stable operation. It replaces a worn, broken, or loose support to help reduce rattling and prevent component sag. What it does:

• Provides a secure mounting point for internal parts and assemblies
• Re-establishes correct alignment when a bracket is bent or broken
• Helps reduce vibration and rattling caused by loose or damaged supports
• Commonly replaced when a component shifts, rubs, or no longer sits flush

• Disconnect power and water before starting any repair.
• Basic hand tools are typically required; follow OEM service instructions for disassembly/reassembly.
• Inspect adjacent fasteners and clips; replace any that are damaged to ensure a secure fit.

This trim plate is a decorative panel that restores the finished look of the appliance opening and helps cover gaps around the control or access area. It provides a clean, factory appearance and prevents dirt from collecting in the seam. What it does:

• Covers and finishes the edge of an opening or control area for a seamless appearance
• Helps keep crumbs, dust and spills from entering gaps around the appliance face
• Replaces bent, scratched or discolored trim that affects the appliance look
• Restores proper alignment where a damaged trim creates visible gaps

• One trim plate

• Disconnect power to the appliance before attempting removal or installation
• Handle carefully to avoid scratching the finished surface; use soft gloves if available
• Retain any mounting screws or clips from the original trim and reuse if appropriate

This mounting bracket secures appliance panels or components in place to restore proper fit and stable operation. A simple replacement when a broken or bent bracket causes rattling, misalignment, or loose panels. What it does

• Provides structural support to hold panels, trim, or assemblies in position
• Prevents rattling and vibration from a loose or damaged bracket
• Restores proper alignment of the attached component for normal operation
• Can fail from bending, cracking, or fastener loss, leading to gaps or movement

• One mounting bracket

• Disconnect power and shut off water before starting any repair
• Use appropriate tools to remove fasteners; keep track of mounting screws or clips
• Inspect surrounding parts and fasteners for damage; replace any stripped hardware
• Handle sharp edges carefully and test fit before reassembly