Bosch Ngm5055uc Parts

Ignition device creates the spark that lights gas burners on compatible Bosch gas ranges and cooktops. Replacing a worn or faulty ignition device restores reliable ignition and reduces burner-start failures. What it does:

• Generates the high-voltage spark used to ignite gas at the burner
• Replaces a unit that causes clicking without ignition or burners that won't light
• Supports reliable ignition timing for proper burner start-up
• Works as the primary spark source for the cooktop's gas ignition system

• Disconnect electrical power and shut off the gas supply before starting work
• Handle ceramic electrodes and connectors carefully to avoid damage
• Basic hand tools are typically required; wiring plugs into the existing harness

This set of jets replaces worn or clogged dishwasher spray nozzles to restore proper water distribution and improve cleaning performance. Simple replacement of the nozzles helps maintain even spray coverage across racks. What it does

• Directs water from the spray arm through individual nozzles to reach dishes and remove food soil
• Replaces cracked, clogged, or damaged nozzles that cause poor cleaning or uneven spray patterns
• Helps reduce spotting and leftover residue by restoring designed spray flow
• Compatible with applicable Bosch dishwasher spray arm assemblies

• One set of jets as shown

• Disconnect power to the appliance before servicing; shut off water supply if required
• Remove the spray arm per your model's instructions to access the nozzles
• Use gentle pressure or the recommended tool to remove/install jets to avoid damaging the spray arm
• Run a short test cycle after installation to ensure proper spray operation and check for leaks

This clamp secures flexible hoses and small tubes to fittings, keeping connections tight to help prevent leaks and movement. It's a small replacement clip used on water and drain lines in many appliances. What it does

• Holds a hose or tube firmly to a barb or nipple to maintain a sealed connection
• Helps stop leaks caused by loose or damaged hose connections
• Prevents hoses from slipping off during operation and reduces vibration noise
• Used wherever a small retaining clamp is required on water or drain lines

• One clamp

• Turn off power and shut off water supply before replacing the clamp
• Slide clamp over the hose, push hose fully onto the fitting, then compress or tighten clamp as required
• Use pliers or the correct tool for the clamp type; avoid damaging the hose when installing
• Replace if corroded, cracked, or not seating properly

This retaining washer secures a control shaft or hub to keep components in place during operation, helping restore proper control movement and prevent parts from sliding off the shaft. Simple replacement when a worn or missing retainer causes loose knobs or shifting parts. What it does:

• Fits onto a control or drive shaft to hold a knob, hub or gear in position
• Prevents axial movement that can cause loose or slipping controls
• Commonly replaced when the original washer is bent, cracked, or lost
• Works with compatible Bosch control assemblies and hubs

• One retaining washer

• Recommended for users comfortable with basic appliance disassembly; unplug appliance before starting
• Remove the control knob or panel per model instructions to access the shaft
• Press the washer into place on the shaft until fully seated; verify proper fit and control operation

This replacement door gasket seals the dishwasher door to keep water inside the tub and help maintain wash performance. It restores a tight door seal to reduce leaks and prevent water from pooling around the appliance. What it does:

• Creates a watertight seal between the door and tub to stop leaks during cycles
• Helps prevent water from dripping onto floors and surrounding cabinetry
• Reduces steam and moisture escape that can cause odors or damage
• Restores proper door closure where worn or flattened seals allow seepage

• Disconnect power and water supply before attempting any service.
• Inspect surrounding door edges for damage and clean mounting surfaces before installing the new gasket.
• Press the gasket firmly into the door channel; some models require partial door disassembly.
• After installation, run a short cycle and check for leaks before returning the dishwasher to regular use.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where the original screw is missing, stripped, or damaged to help keep parts aligned and stable. What it does:

• Fastens panels, brackets, or components to maintain proper alignment and operation
• Replaces a lost, stripped, or damaged screw to prevent rattling or loose parts
• Provides the same basic fastening function as the original hardware
• Suitable where the appliance requires a small machine/tapping screw of the correct size and thread

• One replacement screw

• Use the correct screwdriver or bit to avoid stripping the head
• Start threading by hand to ensure proper engagement before tightening
• Tighten snugly but avoid over-torquing which can strip threads or damage parts
• Disconnect power to the appliance before working on or removing panels where appropriate;

This replacement cable is a direct-replacement wiring harness used to restore electrical connections for the appliance control and components. It provides the needed wiring continuity so controls and sensors can communicate reliably. What it does:

• Reestablishes a secure electrical connection between components and the main control
• Restores signal/power routing when a frayed or damaged wire causes intermittent operation
• Can resolve symptoms such as failure to power on, intermittent cycles, or related error codes tied to wiring faults
• Prevents shorting or poor contact that can lead to inconsistent appliance behavior

• Recommended for technicians or experienced DIYers; disconnect power before replacing
• Verify matching connector shapes and wire colors before installation
• Route the cable away from heat and moving parts to avoid future damage

This holder is a small mounting bracket that secures internal components in place, restoring proper alignment and support inside the appliance. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Provides a stable mounting point to keep internal components aligned and secure
• Prevents rattling, shifting, or misalignment that can cause noise or improper operation
• Restores the original fit where a worn or broken retainer was causing issues
• Fits into the factory mounting location for a reliable, long-term replacement

• One holder

• Turn off power and disconnect the appliance before attempting any repair
• Handle small plastic brackets carefully to avoid breakage during removal/installation

The Tape, Foam is an OEM part for Bosch cooktops. This foam tape creates a tight seal between the cooktop surface and surrounding countertop. It helps contain spills and keeps external surfaces heat-isolated.

Causes of bad foam tape can include wear and breakdown of the adhesive over repeated exposure to cooking heat and cleaning chemicals.

Symptoms of a bad foam tape include:

• Fluids leaking down around the edges of the cooktop
• Hot surfaces outside the cooktop area that can cause burns
• Reduced heat containment impacting cooking efficiency

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This hob top is the replacement cooktop surface panel that restores a smooth, stable cooking area and protects internal components from spills and debris. Fits compatible Bosch cooktops and returns the proper support and appearance. What it does:

• Replaces a cracked, warped, scratched, or corroded cooktop surface
• Provides a stable surface for cookware and helps keep burners aligned
• Shields internal parts from spills, grease, and debris to prevent damage
• Restores proper sealing around burner openings to reduce moisture intrusion

• Disconnect power (and gas if applicable) before starting any repair
• Handle carefully — edges may be sharp and glass/metal can break
• Follow OEM instructions for fasteners and gasket/seal placement