Cam274tq2 Parts

This spring-damper assembly cushions and stabilizes moving components to reduce noise, vibration and abrupt motions. It restores smoother operation and helps prevent wear on related parts. What it does:

• Absorbs shock and controls motion to reduce banging or sudden movement
• Stabilizes moving components for quieter, smoother operation
• Helps prevent accelerated wear on hinges, levers or linkages
• Addresses symptoms like excessive vibration, rattling or irregular movement

• Disconnect power (and water if applicable) before starting any repair
• Handle carefully; springs can be under tension—wear safety glasses and gloves
• Basic hand tools typically required; follow OEM service instructions for alignment
• Inspect and replace other suspension or hinge parts as needed for best results

This motor shield protects and secures the appliance motor assembly, helping block debris and contact with nearby components so the motor can run reliably. It's a direct-fit replacement for a damaged or missing motor shield. What it does

• Shields the motor from debris and foreign objects that can cause rubbing or obstruction.
• Helps secure and position the motor within the cabinet to maintain proper alignment.
• Reduces risk of contact between the motor and other parts that can cause noise or wear.
• Replacing a cracked or missing shield can prevent recurring motor issues and reduce abnormal sounds.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; avoid forcing fasteners or damaging adjacent components.
• Wear gloves to protect against sharp edges on the shield or mounting area.

Rear panel pad cushions and insulates the appliance's rear cabinet to reduce vibration, noise and rubbing against the back panel. Replacing a damaged pad helps stop rattles and protects internal components from wear. What it does:

• Provides rear-cabinet cushioning and thermal/abrasion protection for the back panel.
• Dampens vibration and reduces operational noise.
• Prevents direct metal-to-metal contact that can cause rubbing or wear.
• Common symptom fix: reduces rattling or vibrating noises from the appliance rear.

• Always disconnect power (and gas, if applicable) before starting any repair.
• Remove the rear access panel to access the pad; replace using the original mounting points, adhesive or clips.
• Inspect surrounding insulation and mounting hardware; replace any damaged fasteners.

This power cord supplies mains electricity to the appliance, restoring reliable power delivery so the unit can run normally. It replaces a damaged or missing cord and restores a safe, secure connection to the household outlet. What it does

• Delivers AC power from the wall outlet to the appliance's internal wiring and controls.
• Restores operation when a frayed, cut, burned, or otherwise damaged cord prevents the appliance from powering on.
• Helps stop intermittent power or sparks caused by a compromised cord connection.
• Provides a secure connection point when installed with the appliance's strain-relief and terminal block.

• One replacement power cord as shown.

• Always disconnect power at the circuit breaker or unplug the appliance before starting work.
• Route the cord to avoid pinch points and secure it with the factory strain-relief or clamp.

This water level pressure switch senses drum water level and tells the washer when to stop filling so loads get the correct amount of water. It restores reliable fill control for machines that overfill, underfill, or fail to advance cycles. What it does:

• Monitors water height via an air-pressure line and signals the control board to start or stop filling.
• Helps prevent overfilling or underfilling that can cause poor wash performance or leaks.
• Can restore normal cycle advance when a faulty level switch causes the washer to stall or display fill/drain errors.
• Works as the washer's primary water-level detection device tied to automatic fill control.

• One water level pressure switch assembly

• Disconnect power and water supply before attempting service.
• Handle wiring connectors and the pressure hose gently; secure connections to avoid air leaks.
• Verify proper routing and attachment of the pressure hose to ensure accurate level sensing.

This water level pressure switch senses tub fill level and tells the washer when to stop filling so cycles run correctly. It restores accurate water sensing to prevent overfill or improper cycle behavior. What it does:

• Senses air pressure from the tub to detect water level and signals the control board accordingly
• Helps prevent overfilling by stopping the fill valve when the correct level is reached
• Can resolve symptoms like washer overfilling, improper cycle advancement, or water level errors
• Works as the mechanical/electrical interface between the pressure tube and the control system

• One water level pressure switch

• Disconnect power before servicing to avoid shock or damage
• Inspect and replace any brittle or clogged pressure tubing at the same time for reliable operation
• Handle electrical connectors carefully; secure all wiring and hose connections before testing

This water level pressure switch senses the tub fill height and tells the washer control when to stop filling, helping prevent overfill and incorrect water levels. It's a direct-replacement switch used in many top-load washers. What it does:

• Detects water level via the pressure hose and signals the control board to stop or continue filling
• Can cause overfilling, underfilling, or a washer that won't advance through cycles when failed
• Restores correct water-level sensing when replaced with a matching OEM switch
• Works as part of the washer's water-management system—not a standalone valve or pump

• One pressure switch

• Disconnect power and turn off water before servicing
• Remove/attach the pressure hose and electrical connector carefully; check for clogged or damaged hose
• Route and secure the new switch and hose per OEM diagram to avoid kinks or air leaks

Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.

For mating plug use 691707.

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This locking plug secures a mating connector or wire harness to prevent accidental disconnection and keep the connection stable during normal use. It's a small replacement part that restores proper retention where the original plug has broken or worn. What it does:

• Clips into place to hold a connector or cord securely and reduce movement
• Helps prevent intermittent electrical or signal loss caused by loose connections
• Stops connectors from working free during vibration or normal appliance operation
• Often used where a secured plug connection is required for reliable function

• One locking plug

• Disconnect power to the appliance before beginning any repair
• Verify the part number and connector orientation before installation
• Typically installs by snapping into the connector/housing; basic tools may be helpful