We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Upper
Ordered the new o-rings for the pump housing and main filter screen unit. Cleaned all water hardness and other debris out of all parts. Main filter and inside parts clogged with water hardness/limescale and other debris. The 3" wide round filter internal was completely clogged with debris and some of the filter holes we crystallized with water limescale. The pump was in good shape but all the filters and parts just needed to be cleaned. Some useful tips on this Magtag Jet Clean... Read more
My son fixed it. Problem was one of the spinner pieces had worked itself loose and jammed the large arm from freely spinning. Read more
O-rings, sleeves and nuts are not included. For O-rings use WPY913079. For sleeves use 99001333. For nuts use 99002208
Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more
Lower spray bar had what looked like spaghettis blocking & protruding from holes on top. Upon further inspection found to be some type of fiber. Further, inspection revealed fiber came from rinse arm. Ordered a new spray bar from you, arrived in three days. Clean all including filters/spray bar put all back together ran like new. The time listed below includes troubleshooting and a little head-scratching. Read more
Replaced PC board. Easy to remove old board and install the replacement. It doesn't get much easier than this. Read more
According to the manufacturer this rack now only comes as a bare rack. No wheels or tines. Tines and clips are no longer available and are not included. Old ones must be used. Color: white. Measures about 21 inches wide by 23 inches deep.
I rolled the old bottom rack out and pushed the new one in. With the top rack, I used a flat head screw driver to pry off the stoppers for the rack, removed the old rack from the rails, put the new rack in and put the stoppers back on. Good as new and easy to do! Read more
The rack stop end cap prevents the dishwasher rack from sliding out completely, located at the end of the rack rails. Replace when racks slide out too far or fall out completely during loading.
It was an easy fix. I replaced both cables and used the original springs. It took longer to remove the covers than to affect the repair. Read more