Cdt765 Parts

This striker latch secures the dryer door so the machine can run and maintain a proper seal during operation. It replaces a worn or broken striker to restore reliable door closure and normal cycle starts. What it does:

• Provides a catch point for the dryer door so the door stays firmly closed during operation.
• Helps the dryer detect a closed door and start/complete cycles; a damaged striker can prevent the dryer from starting.
• Prevents door rattling or intermittent opening during use.
• Restores proper door alignment and sealing when the original striker is bent, broken, or worn.

• One striker latch

• Disconnect power to the dryer before starting any repair.
• Remove the dryer front or door trim as needed to access the striker; retain original fasteners.
• Inspect the door strike mounting area and replace any stripped screws or damaged trim.
• After installation, test the door operation and run a short cycle to ensure proper function.

This clip secures the inner frame wire to the appliance cabinet so the wire stays in place and maintains proper support. Replacing a worn or broken clip helps stop movement and keeps internal wiring or trim aligned. What it does

• Holds the inner frame wire firmly to the cabinet or frame
• Prevents the wire from shifting, rattling, or catching on other components
• Can cause loose trim, noise, or misaligned wiring if cracked or missing
• Small, durable fastener sized to match the OEM frame wire channel

• Disconnect power before inspecting or replacing clips to avoid electrical hazard
• Remove any trim or panels covering the clip to access the frame wire area
• Use basic hand tools; replace any damaged adjacent clips for consistent fit
• Handle surrounding wires and trim carefully to avoid damage during reassembly

This inner frame wire clip secures the oven door frame components to keep the inner frame stable and aligned during use. It helps restore proper door fit and prevents rattling or loose trim. What it does:

• Fastens the inner frame wire to the door/frame assembly to maintain alignment and stability
• Prevents door trim or inner frame from shifting, vibrating, or rattling during operation
• Helps restore a tight door fit that can affect sealing and appearance
• Compatible replacement for worn, broken, or missing inner frame clips

• One inner frame wire clip

• Disconnect power to the appliance before starting any repair
• Remove the door or access panel to reach the clip location
• Use basic hand tools (screwdriver, needle-nose pliers) and replace the clip by aligning it carefully before snapping it into place

This clip secures the outer frame wiring in place to maintain proper wire routing and prevent pinching or disconnection. It helps keep internal harnesses organized so controls and components stay reliably connected. What it does:

• Holds outer frame wiring firmly against the cabinet or door to prevent movement and wear.
• Prevents wire chafing and accidental disconnects that can cause intermittent electrical issues.
• Supports proper routing of harnesses during door/cabinet opening and closing.
• Commonly replaced when clips are broken, missing, or cracked, or when wires are loose or rubbing.

• One outer frame wire clip as shown

• Designed for simple snap-in replacement; remove power to the appliance before servicing.
• Inspect surrounding wires and routing; replace any damaged wiring or additional clips as needed.
• Use basic hand tools; avoid forcing the clip to prevent frame or wiring damage.

This upper rack is a direct-fit replacement that restores the top-level dish storage area and allows safe, secure loading of cups, glasses and small bowls. It brings back proper rack support and organization for everyday dishwasher use. What it does:

• Supports cups, glasses and small dishes on the top rack to improve loading capacity and wash coverage
• Restores smooth sliding and proper alignment of the upper rack assembly
• Helps prevent items from tipping or blocking spray arms when the rack is installed correctly
• Addresses common symptoms like sagging, broken rack supports or bent rails that interfere with rack movement

• 1 upper rack

• Disconnect power and water to the dishwasher before servicing
• Remove the old rack by sliding it out and detaching any end caps or stops; install the replacement by aligning and sliding onto the existing track/rollers
• Keep all original rollers, end caps and supports; replace damaged hardware as needed
• After installation, run an empty quick wash to ensure proper fit and smooth operation

This upper rack fold-down tine assembly replaces worn or rusted tines on your dishwasher's top rack. It restores secure, adjustable support so cups, bowls, and small items stay upright and protected during the wash.

• Provides adjustable rows of coated tines on the upper rack to hold items in place
• Folds flat to make room for larger dishes when needed
• Helps prevent tipping, chipping, and poor cleaning from items falling over
• Common signs: broken or missing tines, peeling coating and rust, items not staying upright on the upper rack

• Disconnect power to the dishwasher before servicing
• Pull the upper rack forward; release end stops to remove the rack if needed
• Unclip and remove the old fold-down tine assembly; align and snap the new assembly onto the rack wires in the same position
• Verify the tines fold and lock properly before running a cycle

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This door hardware and template kit replaces the mounting hardware and provides an alignment template to restore proper door fit and operation. Use it to reattach a loose or misaligned door and improve sealing and closing performance. What it does:

• Replaces worn or missing door mounting hardware so the door mounts securely
• Provides an alignment template to simplify correct hinge placement and gap adjustment
• Helps correct door sag or uneven gaps that can prevent full closing
• Improves door sealing to reduce drafts and maintain proper internal temperature

• Door hardware and alignment template

• Disconnect power to the appliance and remove food/items from the door area before starting
• Handle door panels and glass carefully; support the door—use a second person if needed
• Follow the supplied template and manufacturer instructions for hinge placement and fastener torque
• Do not overtighten fasteners; check alignment and operation after installation

This right-hand hinge friction pad assembly controls door swing and provides a smooth, stable stop for the appliance door, helping keep it open at set positions and reducing wear on the hinge. What it does:

• Provides friction at the right-hand door hinge to help hold the door open and control closing speed
• Reduces metal-on-metal contact and noisy hinge operation when installed properly
• Helps prevent the door from swinging shut unexpectedly or sagging at the hinge
• Worn or damaged pads can cause uneven movement, noise, or difficulty keeping the door in position

• Disconnect power (unplug or switch off circuit) before starting work and follow all safety guidance
• Support the door while loosening hinge fasteners to prevent sudden movement or damage
• Use appropriate hand tools; avoid over-tightening fasteners when reinstalling to preserve pad function
• Inspect hinge mating surfaces and hardware for wear; replace any damaged components as needed

This left-side hinge friction pad assembly helps restore proper oven/door hinge resistance so the door stays in position and opens/closes smoothly. It replaces worn friction pads that allow slamming or uneven movement. What it does:

• Provides friction at the left hinge to hold the door at set positions
• Reduces door sag, sudden drops, and noisy closing
• Restores smooth, controlled opening and closing action
• Works with the hinge assembly to maintain correct door alignment

• Disconnect power to the appliance and support the door before servicing.
• Remove or loosen the hinge per the OEM instructions to access the friction pad; do not force components.
• Inspect hinge and surrounding hardware for wear or damage and clean mating surfaces before installing.
• Consider replacing the opposite side as well for balanced operation.