Cfe3050lsk Parts

This bracket support is a small mounting bracket that secures and stabilizes appliance components, helping keep panels and assemblies aligned for proper operation and reduced vibration. It's a direct-fit replacement when the original bracket is broken or missing. What it does

• Provides a sturdy mounting point to hold panels or internal components in place
• Restores proper alignment to doors, panels or assemblies that sit on the bracket
• Reduces rattling or vibration caused by a loose or damaged bracket
• Helps prevent wear or damage from parts shifting during use

• Unplug the appliance and shut off water/gas (if applicable) before starting work
• Use the original mounting screws; replace damaged fasteners as needed
• Handle sharp sheet-metal edges carefully and wear gloves and eye protection

This left-side hinge top pin assembly secures the refrigerator door to the cabinet hinge, restoring proper alignment and smoother door movement. Use it to replace a worn or damaged top hinge pin for improved closing and reduced door sag. What it does:

• Secures the door at the cabinet top and provides the pivot point for opening and closing
• Replaces worn or bent pins that can cause door sag, misalignment, or rubbing
• Helps the door close more evenly and maintain a consistent seal
• Works with the existing hinge components to restore smooth hinge action

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing and installing hinge parts to prevent dropping or damage
• Basic hand tools are typically required; follow the appliance manufacturer's service instructions
• Replace all affected components for a secure fit

This water line cover protects and conceals the refrigerator's water supply tubing behind the lower kickplate for a finished look and reduced risk of accidental snagging. Durable plastic shields tubing from contact and helps keep the area tidy. What it does:

• Covers and protects the refrigerator water supply line from accidental pulls or abrasion
• Keeps the tubing out of sight for a neater appearance
• Helps reduce noise from loose tubing contact with other components
• Supports proper routing of the water line to the ice maker/water dispenser

• One water line cover

• Disconnect power and shut off the water supply before servicing
• Remove the kickplate or access panel per the owner's manual to reach mounting points
• Align cover with the routing area and secure with existing clips or fasteners; do not force or modify

This stopper divider holds and positions a refrigerator drawer or shelf divider to keep contents separated and prevent sliding. Durable molded plastic replaces a worn or broken stop to restore proper drawer alignment and function. What it does:

• Stops and anchors the refrigerator drawer/divider to prevent shifting during normal use
• Restores correct drawer travel and alignment when the original stop is cracked or missing
• Helps maintain organized storage by keeping divider panels in place
• Works with compatible OEM drawer and divider assemblies to ensure proper fit

• One stopper divider part as shown

• Basic hand tools may be required; inspect mounting area for debris or damaged clips before installing
• Align and snap or slide the stopper into the factory location until it seats securely
• Do not force parts into place; replace damaged clips or supports if the stopper will not seat properly
• Unplug or power off the appliance before inspecting interior components for safety

This clip retainer combo secures appliance panels and trim, restoring proper fit and preventing rattling or sagging. It replaces worn or broken retainers so doors, drawers, or trim pieces stay aligned and stable. What it does:

• Holds and aligns trim or panel pieces to the appliance cabinet
• Prevents loose, vibrating, or sagging panels and trim
• Replaces cracked or broken retainers that no longer secure parts
• Restores a flush, finished appearance and reduces noise from vibration

• Disconnect power to the appliance before beginning any repair
• Remove the affected panel or trim per the appliance service instructions
• Press or snap the retainer into the mounting location until it seats fully; reinstall panel/trim
• If clips are brittle or adjacent fasteners are damaged, inspect and replace as needed

This pantry divider is a replacement shelf divider for the refrigerator pantry compartment that restores proper organization and prevents items from shifting. It fits into the pantry shelving system to help keep tall or narrow items separated and upright. What it does:

• Replaces a cracked, broken or missing pantry divider to re-establish shelf organization and containment
• Helps prevent jars, bottles and condiments from tipping or sliding during door use
• Restores the intended divider spacing to keep items separated for easier access
• Compatible with the pantry shelf track system used in the refrigerator's pantry compartment

• Slide or snap the divider into the pantry shelf track; ensure it seats fully before use
• No special tools typically required; review your refrigerator's shelf/pantry layout before installation
• Handle carefully to avoid chipping plastic edges; discard old broken pieces safely

Protective plastic cover that shields the appliance main control board from dust, moisture and accidental contact. Keeps the control electronics enclosed for safer operation and easier servicing without touching the board. What it does:

• Protects the main control board from spills, dust and physical contact that can cause shorts or damage
• Helps prevent accidental contact with live terminals during use or maintenance
• Keeps wiring and connectors secured and routed away from moving parts
• Restores the original enclosure for a proper OEM fit and finish
• Useful when the existing cover is cracked, warped or missing

• Always disconnect power to the appliance before servicing electrical components
• Remove interior panels or shelves as needed for access; retain mounting screws for reinstallation
• Align cover tabs and screw holes carefully to avoid stressing the board or connectors
• If the control board shows signs of damage, inspect or replace the board before reassembly

This deli pan top rear cover replaces the rear trim piece on the deli/warming top, restoring a finished appearance and protecting internal components from food, grease and spills. Keeps the deli area sealed and easier to clean. What it does

• Covers and protects the rear edge of the deli/warming pan top assembly.
• Shields wiring and internal components from food debris and grease buildup.
• Restores a proper fit and finish when the original rear trim is cracked, broken or missing.
• Helps maintain a clean, hygienic deli surface and simplifies wiping and maintenance.

• One deli pan top rear cover.

• Disconnect power to the appliance before beginning any service.
• Removal may require releasing clips or removing a few screws; keep hardware for reassembly.
• Handle the cover gently to avoid cracking; align tabs/clips before seating.

This variable speed compressor kit restores efficient, quieter cooling by replacing a failed variable-speed compressor assembly. Designed for compatible refrigerators, it helps re-establish proper temperature control and energy-efficient operation. What it does:

• Replaces the variable-speed compressor to restore compressor-driven cooling
• Allows the fridge to modulate speed for more consistent temperatures and reduced cycling
• Commonly used when the compressor fails, hums loudly, or the unit no longer cools reliably
• Helps address symptoms such as warm compartments, frequent on/off cycling, or abnormal compressor noise

• Disconnect power before starting any repair to avoid electrical shock
• Seal system components and refrigerant are involved; refrigeration system work should be performed by a licensed HVAC/R technician
• Handle the compressor and mounting hardware carefully to avoid damage to lines or electronic controls
• Verify system charge and leak-free operation after installation

This outer refrigerator door replaces a damaged or worn exterior door panel so your fridge seals and looks like new. It restores proper closure and helps maintain internal temperature control and appliance appearance. What it does:

• Replaces a damaged, dented or cracked outer refrigerator door panel
• Restores a straight, secure door edge for better sealing and operation
• Helps prevent cold air loss that can cause temperature fluctuations
• Improves appliance appearance by replacing scratched or faded exterior finish

• One outer refrigerator door panel

• Disconnect power and empty the door before starting; remove any screws or hinge covers securing the door
• Lift or support the door while removing hinge fasteners to avoid dropping or damaging the cabinet
• Align hinges and test door swing and seal before tightening all fasteners
• If inner components (bins, trim, gaskets) are attached, they should be properly reinstalled or transferred per manufacturer instructions.