Cfe633cw/U Parts

The Door Board is an OEM component designed for GE bottom-mount refrigerators. Located inside refrigerator doors, it operates essential LED functions for interior lighting and temperature displays. Properly illuminated shelves and accurate temperature readings depend on a functioning door board.

Causes of failure can include loose wiring connections from repeated door openings, fluid damage allowing corrosion over time, or failure of electronic components on the printed circuit board.

Symptoms of a defective door board are:

• Dim or unlit interior lighting 
• Inoperative temperature display
• Strange odor or sparks coming from the door area

Replacing with this genuine GE part restores bright illumination and easy temperature monitoring. Compatible with Hotpoint, RCA, and Kenmore side-by-side models as well.

A #8-18 x 9/16-inch hex washer head screw used to secure panels and components in appliances. Provides a proper fit for fast, reliable fastening when replacing missing, damaged, or stripped screws. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable.
• Restores proper fastening when threads are stripped, the original screw is missing, or a head is damaged.
• Helps stop rattling or loose parts caused by worn or broken fasteners.
• Fits applications requiring a #8-18 thread with a 9/16" length and hex washer head style.

• Verify thread size, head style, and length before installation.
• Use the correct hex driver or socket to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or deforming parts.
• Disconnect power and follow appliance-specific safety steps.

This port collar is a small trim/support piece used on select refrigerators. It reinforces the port opening and helps secure the mating tube or component for proper alignment, a snug fit, and a clean, finished appearance.

• Supports and spaces the port/opening where a tube or component passes through the cabinet or liner
• Helps maintain alignment and a secure fit to minimize gaps or vibration
• Replace if the collar is cracked, warped, or missing
• Symptoms can include a loose connection at the opening, rattling, or a visible gap or misalignment

• Unplug the refrigerator; shut off the water supply if working near water lines
• Use your model's parts diagram to access the port; remove any trim, clips, or screws
• Note orientation; press or snap the new collar into place and transfer any seals if present
• Reassemble and restore power; verify proper fit and operation

This replacement meat pan divider fits inside the deli/meat pan drawer to help separate foods and keep the drawer organized. It restores the original partition function for proper food separation. What it does:

• Replaces a cracked, warped or missing divider to restore separation between deli items
• Keeps meats and cheeses organized and helps reduce contact between different foods
• Helps maintain intended drawer layout so items sit securely and don't shift
• Fits into the factory meat/deli pan track for a stable partition

• Remove food and the deli/meat pan before installing to avoid spills
• Slide the divider into the existing pan grooves until it seats; no special tools required
• Inspect pan tracks for damage before installing; replace any broken components
• Handle carefully to avoid sharp edges and follow refrigerator power-off and food-safety guidance when doing repairs

This paddle front switch assembly replaces a worn or failed dispenser paddle so the dispenser responds reliably when pressed. It restores user control for water or ice dispensing on compatible refrigerators. What it does:

• Activates the dispenser control when you press the front paddle
• Replaces a cracked, loose, or non-responsive paddle that won't trigger dispensing
• Stops intermittent or no-response dispenser behavior caused by a faulty switch
• Restores proper tactile feel and electrical engagement for dispenser operation

• One paddle front switch assembly

• Disconnect refrigerator power (and water supply if needed) before starting
• Remove dispenser bezel or front trim to access the switch; handle the paddle carefully
• Verify electrical connector seating and secure mounting during reassembly

The Dispenser Drip Tray is an OEM replacement part for GE refrigerators designed to catch any drips or spills that may occur during the dispensing process, keeping your refrigerator clean and free from mess.

A bad dispenser drip tray can occur due to regular use or accidental damage. If you notice signs of wear, cracks, or if the tray is missing altogether, it may be time to replace it.

Symptoms of a bad dispenser drip tray:

• Drips or spills on the floor or surrounding surfaces
• Difficulty in cleaning or removing the tray
• Unhygienic conditions due to a damaged or missing tray

Restore your refrigerator by replacing the faulty dispenser drip tray with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Manufactured by GE, this is a compressor kit for a refrigerator. The compressor's job is to pressurize the system and warm the refrigerant while propelling it through the rest of the cooling system. The compressor is controlled by a thermostat inside the refrigerator. When the thermostat detects a high temperature, the compressor engages, helping to cool the refrigerator and preserve food.Compressors are the core of the refrigeration system. There are also subject to a great deal of wear and tear through normal cycling on and off. In addition, compressors can be damaged if they run out of oil, if contaminants enter the system, and through exposure to prolonged operation due to a faulty thermostat or low refrigerant levels. When the compressor fails, the refrigerator will no longer be able to maintain a safe temperature for food. This is a complete replacement kit.This kit is a genuine OEM part and is sold individually. It is only compatible with GE refrigerators.

8-18 hi/lo 5/8

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

This silicon controlled rectifier (SCR) is a replacement power-control semiconductor used to regulate current in appliance power circuits, helping restore proper operation of heating and motor circuits that rely on solid-state switching. What it does:

• Acts as a switch to control and modulate electrical current in the appliance power path
• Enables regulated power delivery to heating elements or motor circuits when driven by the control board
• Commonly replaced when the appliance shows intermittent power, no heat, or erratic on/off behavior in the affected circuit
• Works as a direct replacement for the OEM SCR with identical mounting and electrical fit when specified by part number

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Observe basic ESD precautions when handling the SCR and avoid touching semiconductor leads

This element holder assembly secures an oven/range heating element and keeps it positioned for even heat delivery. It restores proper element alignment to reduce arcing and prevent rubbing or uneven baking. What it does:

• Secures the bake or broil heating element to the range/oven housing
• Keeps the element properly spaced for consistent heating performance
• Helps stop element movement, rubbing, or intermittent contact that can cause arcing
• Commonly replaced when the element is loose, misaligned, or makes noise during operation

• Disconnect power to the appliance before beginning any repair
• Handle heating elements carefully—sharp edges and fragile terminals can be damaged
• Verify element alignment and secure mounting hardware; replace only as needed
• If you see damaged element terminals or insulation, replace the element

This single-serve brew module is the internal assembly that routes water and brews single-cup servings in compatible GE single-serve coffee systems. Replacing a worn or failed brew module restores normal brewing function and consistent cup quality. What it does:

• Directs hot water through the brew chamber to extract coffee grounds or pods
• Opens and closes internal valves to control water flow during a brew cycle
• Restores brewing when unit stops mid-cycle, fails to dispense water, or brews weak/unfinished cups
• Works as the core mechanical brew group for single-serve operation

• Disconnect power and water before beginning service
• Handle the assembly carefully; avoid bending or stressing plumbing/valve connections
• Basic hand tools and moderate disassembly of the coffee unit are typically required
• After installation, run a water-only cycle to flush and verify proper operation

This right-hand top hinge assembly secures and supports the refrigerator door at the cabinet top, restoring proper door alignment and smooth opening. It's a direct-fit replacement when the upper hinge is cracked, bent, or worn. What it does:

• Supports the upper corner of the door and maintains correct door alignment
• Helps the door open and close smoothly and stay level
• Prevents door sagging that can cause gaps, rubbing, or poor sealing
• Replaces damaged, bent, or broken top hinge hardware that can cause noisy operation

• Disconnect power to the appliance before starting and remove any items from the door
• Support or remove the door per manufacturer instructions before loosening hinge fasteners
• Use proper hand tools and tighten fasteners securely; check door alignment and gasket seal after installation

Replacement mat module that restores mat-sensing and control functions in compatible appliances. Installs in the mat/sensor assembly to help the appliance detect mat input and respond correctly. What it does:

• Interprets signals from the mat/sensor assembly and communicates those signals to the appliance control system.
• Replaces a damaged or failed module that can cause unresponsive mat inputs or intermittent mat-related operation.
• Helps resolve mat/sensor error codes or persistent mat-detection faults when the module is the failed component.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle the module carefully and avoid touching circuitry or connector pins to prevent damage from ESD or contamination.

This ice box door assembly restores a damaged or worn freezer/ice compartment door so the compartment seals and cools correctly. It replaces the entire ice box door to help stop cold-air loss and protect stored frozen items. What it does:

• Replaces a cracked, dented or broken ice box/freezer door
• Restores a proper seal to reduce frost buildup and temperature fluctuations
• Helps stop cold air from escaping, improving cooling performance
• Prevents food from being exposed to warm air and moisture

• Disconnect power to the appliance before starting any repair.
• Remove all contents from the compartment and support the door during removal and installation.
• Installation requires basic hand tools; handle glass or painted surfaces carefully to avoid damage.
• If seals or mounting hardware are worn, inspect and replace separately for best performance.

The Display Assembly is an OEM component for GE side-by-side refrigerator models equipped with a K-cup brewing station. Mounting to the fresh food door, it provides graphic control panels for operation. Consistent brewing depends on a functioning display.

Causes of failure range from typical wear of electronic touchscreens over cycles of opening/closing the door to moisture condensation degrading internal circuitry, or external impacts blurring calibration points.

Symptoms involve:

• Unresponsive or glitchy selection buttons despite power connection
• Flickering LCD backlights reducing the visibility of options   
• Brewing stations failing to initiate or fully complete functions

Replacing with this genuine GE display restores intuitive connectivity to the pod brewing system through durable touch interface engineering. Compatible replacements suit Hotpoint, RCA, or Kenmore models seeking uninterrupted beverage services at their fingertips within the refrigerator door.