Cfe633cw/U Parts

This vegetable drawer is the produce bin for the refrigerator's fresh-food section. It organizes fruits and vegetables and, when used with the crisper cover, helps maintain the proper environment while restoring smooth, reliable storage if the original is damaged. What it does:

• Holds fruits and vegetables in the fresh-food compartment and rides on the crisper rails
• Helps manage humidity for produce when paired with the crisper cover/control
• Replaces a cracked, warped, stained, or missing drawer
• Restores proper fit so the drawer opens and closes smoothly without derailing

• One vegetable drawer (bin)

• Remove contents, then pull the old drawer forward and lift the front slightly to clear the rails
• If needed, remove the crisper cover/shelf for access; follow your model's instructions
• Align the new drawer with the slides and push straight in until fully seated
• Handle plastic carefully and avoid overloading to prevent damage

The Dispenser Door Bin is an OEM part for GE refrigerators. It is designed to hold and organize items within the refrigerator door, providing additional storage space and easy access to frequently used items.

Common causes of a bad door bin include regular wear and tear from repeated use, accidental impacts that cause cracks or breakage, and exposure to heavy loads that can stress the plastic material.

Symptoms of a bad door bin include:

• Cracks or breakage in the bin
•  The bin not sitting securely in the door
• Difficulty in opening or closing the refrigerator door due to the bin's instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Refrigerator Evaporator with Heater is an OEM part for GE refrigerators. This component cools the air within the freezer and fresh food compartments through vaporization and circulation. It also contains an internal heater to prevent condensation and frost formation.

Causes of a bad evaporator can include normal wear over time, damage from leaks, or issues with the heater component. 

Symptoms of a bad evaporator include:

• Inadequate or inconsistent cooling within compartments  
• Frost or condensation buildup that requires frequent defrosting
• High energy usage but inability to maintain proper temperatures
• Foreign or musty odors emanating from within the refrigerator

Replace this evaporator to restore optimal cooling performance, efficiency, and freshness preservation in your refrigerator. This GE OEM part is also compatible with later Hotpoint, RCA, and select Kenmore refrigerator models.
 

The Gear Pinion is an OEM component specifically designed for GE French door refrigerators. This part is responsible for the smooth operation of door hinges and closing mechanisms. 

The gear pinion works together with other inner door components to evenly distribute strength across the refrigerator’s motion system. This ensures doors move fluidly and stay securely sealed when closed. 

Causes of a bad gear pinion can include wear from repetitive use over many years, stress from overloading the doors, or misalignment of connecting mechanisms.

Symptoms of a bad gear pinion include: 

• Doors not closing or latching properly
• Binding or sticking movement  
• Noise or vibration when opening/closing
• Increased effort required to operate doors

Note: Right-hand side

Replace this precision gear with a genuine GE OEM part to restore dependable door functionality. This product is also compatible with Hotpoint, RCA, and Kenmore refrigerator models.
 

The Striker Light Switch is an OEM component specifically designed for GE refrigerators. Located on the refrigerator door, it controls interior lighting functions.

Causes of a bad switch can include wear from opening the door frequently or water damage over time.

Symptoms of a failed switch include: 

• Lights not turning on when the door is opened  
• Lights remain illuminated all the time even when closed
• Flickering or unresponsive lighting behavior

This switch utilizes a striker plate activation mechanism that triggers interior lights based on door position - open or closed. A replacement ensures lighting convenience and energy efficiency. 

This genuine OEM GE part restores dependable on/off lighting control through the normal door operation process. Compatible with additional brands including Hotpoint, RCA, or Kenmore models.

The Auger Motor Assembly is an OEM part for GE refrigerators. This assembly houses the motor that powers the ice maker's auger, which is used to eject freshly produced ice cubes from the ice bucket.

Causes can be normal wear over the years of powering the continuous rotational motion of the ice making system. Failure of internal motor components lowering output is also common.

Symptoms of a faulty auger motor assembly include:

• Ice cubes bunching up inside the maker and not dispensing
• Stalled or incomplete ice making cycles
• Grinding noises coming from the ice maker area
• The auger failing to eject full cubes

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement drain tube channels defrost and condensation water from the evaporator area to the drain pan, helping prevent water pooling and ice build-up in the fresh-food section. Restores proper drainage when the original tube is damaged. What it does:

• Directs defrost/condensation water to the drain pan during the refrigerator's automatic defrost cycle.
• Helps stop water pooling inside the fresh-food compartment and under crisper drawers.
• Reduces risk of frost or ice buildup near the evaporator when the original tube is cracked, kinked, or clogged.
• Provides a direct-fit replacement for the factory drain path when specified by OEM part number.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Remove food and drawer assemblies as needed to access the evaporator/drain area; some residual ice or water may be present.
• Clear any drain blockages and ensure the tube is seated without kinks so water flows freely to the drain pan.

The Center Hinge is an OEM part for GE refrigerators. It is responsible for connecting and supporting the refrigerator doors, allowing them to open and close smoothly.

A bad center hinge can be caused by wear and tear over time, excessive weight or force applied to the doors, or damage due to accidental impact or mishandling.

Symptoms of a bad center hinge include:

• Difficulty in opening or closing the refrigerator doors.
• Squeaking or grinding noises when opening or closing the doors.
• The doors not staying securely closed.
• Uneven alignment of the doors.

Replace your worn-out or damaged center hinge with this genuine OEM part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This light housing replaces a cracked or damaged interior refrigerator lamp housing to securely mount the bulb and protect wiring. It restores proper light coverage and keeps the lamp area sealed from debris and moisture. What it does:

• Secures and protects the interior lamp and lens assembly.
• Replaces cracked, broken, or yellowed housings that expose the bulb or wiring.
• Helps prevent the bulb from rattling or shifting inside the cabinet.
• Improves light diffusion for more even interior illumination.

• Disconnect power to the appliance before starting — remove the plug or switch off the breaker.
• Allow the bulb to cool and remove shelves or bins as needed for access.
• Remove fasteners or clips holding the old housing, save any reusable screws, and handle the bulb and lens carefully.
• Test the lamp after installation; check the bulb and door switch separately.

Stainless steel valve-to-valve tube that routes water between service valves to restore a secure, corrosion-resistant connection. Replaces damaged or corroded tubing to help stop leaks and reestablish proper water flow. What it does:

• Connects two refrigeration/service valves to provide a continuous, leak-resistant water path.
• Restores flow to water lines serving the dispenser or ice maker when tubing is compromised.
• Common symptom: visible leaks or dripping at valve connections.
• Common symptom: water pooling under or behind the appliance or reduced water delivery.

• Turn off the water supply and disconnect power before starting any work.
• Relieve line pressure and drain residual water before removing fittings.
• Use the correct fittings and thread seal method for your appliance; tighten fittings securely but avoid overtightening.
• After installation, restore water and power, then check all connections carefully for leaks.

This 12-24 screw secures brackets, panels, and other hardware in GE refrigerator assemblies. Replacing a stripped or missing fastener restores a tight, rattle-free fit and helps keep doors, handles, and internal components properly aligned.

• Fastens components where a #12-24 screw is specified
• Replaces damaged, stripped, corroded, or missing hardware
• Helps resolve loose handles/panels, vibration noises, or minor misalignment caused by missing screws
• OEM-grade hardware for a precise fit in the designated locations

• Disconnect power; turn off water supply if working near water lines
• Match the new screw to the original; start threads by hand to avoid cross-threading
• Support the part being secured (door/handle/panel) during removal and installation
• Use the correct driver/bit that matches the screw head; tighten snugly without overtightening

This evaporator wire harness delivers power and control signals to the evaporator fan and defrost components. Replace a damaged harness to restore stable cooling and dependable automatic defrost performance. What it does:

• Provides plug-in electrical connections for evaporator-compartment components
• Carries power and control signals for cooling and defrost cycles
• Enables proper airflow across the evaporator and effective frost removal
• Common clues of a failing harness: heavy frost on the back wall, evaporator fan not running, intermittent cooling, or burned/brittle wires or connectors

• 1 evaporator wire harness assembly

• Disconnect power to the refrigerator before servicing
• Access the harness behind the freezer/evaporator cover; remove drawers/shelves and the rear panel
• If iced over, allow ice to melt—do not use sharp tools on coils or wiring
• Route and secure the new harness exactly like the original; fully seat each connector

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.