Cfe633cw/U Parts

The Door Closure Spring is an OEM replacement part for GE refrigerators. This spring ensures that the refrigerator door closes securely and maintains a tight seal, preserving the freshness of your food and preventing energy loss. The door closure spring provides the necessary tension to keep the refrigerator door properly aligned and closed. It helps to prevent air leaks and maintain consistent temperature levels inside the refrigerator.

A bad door closure spring can occur due to wear and tear over time or accidental damage. If you notice symptoms such as a loose or sagging refrigerator door, difficulty in keeping the door closed, or a compromised seal, it may be time to replace the door closure spring.

Symptoms of a bad door closure spring include:

• Loose or sagging refrigerator door
• Difficulty in keeping the door closed
• Compromised seal resulting in temperature fluctuations

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Single Serve Hot Water Tank is an OEM part for GE refrigerators. It is the tank that holds and dispenses hot water for refrigerators equipped with a hot water and ice feature. 

Symptoms of a bad hot water tank include:

• Slow or inconsistent hot water dispensing 
• Leaks or water spills near the dispenser area
• Failure of hot water function altogether
• Inability to heat water to the desired temperature

Causes of failure can be mineral buildup over time restricting water flow, cracks or punctures in the tank itself, or malfunctioning components like heating elements or thermostats.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

The Evaporator Cover is an OEM replacement part for GE refrigerators. It is responsible for covering and protecting the evaporator coils located inside the refrigerator or freezer compartment.

A bad evaporator cover can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as frost buildup, inconsistent cooling, or excessive noise, it may indicate a need to replace the evaporator cover.

Symptoms of a bad evaporator cover include:

• Frost accumulation on the coils
• Uneven cooling or inconsistent temperature
• Excessive noise or vibration during operation

Restore your refrigerator by replacing the faulty evaporator cover with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This mounting bracket secures the pump and valve assembly in place to keep water components aligned and reduce vibration. Replacing a damaged bracket helps stop rattling and prevents strain on hoses and fittings. What it does:

• Holds the pump and valve assembly firmly to the appliance frame
• Keeps hoses and wiring aligned to prevent kinking or stress
• Reduces vibration and rattling from the pump or valve
• Helps prevent leaks caused by loose or misaligned components

• Disconnect power and shut off the water supply before starting repair
• Use basic hand tools; retain any original mounting hardware unless new hardware is supplied
• Inspect surrounding hoses and fittings while replacing the bracket

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

This duct door assembly replaces the vent door that covers the dryer exhaust opening, helping direct airflow and keeping the vent closed when the dryer is off. Restores proper vent sealing and prevents drafts or pests. What it does:

• Replaces a broken, bent or stuck vent door that won't open or close smoothly
• Helps ensure exhaust air exits the dryer housing instead of leaking into the cabinet
• Reduces drafts and keeps out dust or small pests when the dryer is idle
• Stops rattling caused by a loose or damaged duct door

• Disconnect power (and gas supply if applicable) before servicing the appliance.
• Access may require removing the dryer's rear or top panel—keep track of fasteners.
• Handle trim and door edges carefully to avoid bending; align hinges before tightening.

This icemaker assembly replaces the refrigerator's frozen-water dispenser and ice-production unit to restore normal ice harvesting. It provides a ready-to-install replacement for units that no longer fill, freeze, or eject ice reliably. What it does:

• Produces and harvests cubes by filling, freezing, and ejecting the ice tray
• Replaces worn or failed icemaker mechanisms that stop making ice
• Addresses symptoms like no ice production, small or hollow cubes, or failure to eject
• Works with the refrigerator's water fill and harvest controls to resume normal cycles

• Disconnect power and shut off the water supply before starting
• Remove any remaining ice and follow model-specific removal steps for the old unit
• Handle the ice mold and electrical connector carefully; avoid bending contacts
• Test for proper fill and harvest and check for water leaks after installation

This condenser fan and housing assembly circulates air across the condenser coils to help your refrigerator dissipate heat and run efficiently. Replaces a damaged or worn housing and fan to restore proper airflow and cooling performance. What it does

• Moves air over condenser coils so the compressor can shed heat and maintain cooling
• Prevents overheating and helps the system run more efficiently
• Can stop loud fan noise, rattling, or reduced cooling when the fan or housing is damaged
• Restores correct airflow when the original housing is cracked, bent, or obstructed

• One condenser fan and housing assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing rear or bottom access panels; keep track of fasteners
• Handle sheet metal edges and fan blades carefully to avoid cuts and damage
• After installation, verify fan spins freely and recheck connections; confirm proper cooling

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.

The Refrigerator Slide Lower Freezer is an OEM replacement part for GE refrigerators. It is a sliding component designed to facilitate smooth and effortless access to the lower freezer compartment. This OEM part ensures that the lower freezer drawer can glide in and out seamlessly, allowing for convenient storage and retrieval of frozen items.

Symptoms of a bad Refrigerator Slide Lower Freezer include:

• Difficulty opening or closing the lower freezer drawer
• Freezer drawer catching or sticking during operation
• Noisy or grinding sounds when sliding the drawer
• Drawer not staying in position when opened or closed

Causes of a bad lower freezer slide can include wear and tear from repeated use, damage from mishandling or overloading, or issues with the slide mechanism itself. Over time, the slides may become worn, misaligned, or obstructed, leading to operational problems.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This duct air tower assembly directs cold air through the freezer/refrigerator cabinet to maintain even cooling and proper airflow. Replaces a damaged or cracked air tower to reduce warm spots and restore consistent circulation. What it does:

• Channels cold air from the evaporator into the cabinet, helping maintain uniform temperatures.
• Helps prevent localized warm spots and food spoilage caused by disrupted airflow.
• Restores proper defrost/airflow routing if the original duct is cracked, warped, or missing.
• Works with the evaporator/airflow system—symptoms include uneven cooling, frost buildup, or reduced airflow.

• One duct air tower assembly

• Disconnect power to the appliance before beginning any repair.
• Access requires removing interior panels/shelves—handle plastic parts gently to avoid cracking.
• Inspect mating seals and clips; replace any damaged fasteners for a secure fit.

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling