Cfe633cw/U Parts

Right hand door for refrigerators. Provides access to fresh food compartment. Replace if cracked, damaged, or broken. Includes mounting points for handle.

This is a replacement M4 machine screw for securing appliance components and assemblies. It restores proper fit and prevents vibration or loose parts when a small mounting screw is missing or stripped. What it does

• Fastens small panels, brackets, or electronic modules in place
• Restores secure mounting to reduce rattles, vibration, or intermittent connections
• Replaces lost, worn, or stripped original fasteners
• Useful during control board or housing repairs where factory screws are removed

• One M4 x 1.59 machine screw, 10 mm length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; replace with exact screw size to ensure proper fit
• Keep small parts away from children and pets

This spring tray latch secures a removable tray so it stays seated during normal use, helping maintain proper alignment and function. Replace a worn or broken latch to stop trays from slipping or failing to stay closed. What it does

• Holds the tray in the correct closed position so it does not slide out unintentionally.
• Restores proper engagement when a tray won't stay latched or shifts during use.
• Helps prevent spills and maintains correct component alignment.
• Works as the spring/retention element for the tray latch assembly.

• High-level fit: installs in the tray latch area; part matches your existing latch before installing.
• Use basic hand tools; keep small parts and springs secure during replacement.
• Disconnect power to the appliance if working near electrical components or moving mechanisms.
• If the tray or adjacent parts are damaged, replace them as well to ensure proper function.

This silicon controlled rectifier (SCR) is a replacement power-switching semiconductor that helps control high-current flow to heating elements or motors, restoring proper power regulation and appliance function. What it does:

• Acts as a high-current electronic switch on appliance control circuits to regulate power to heating elements, motors, or similar loads
• Allows the control board to turn high-voltage circuits on and off with low-voltage signals
• Failure can cause no heat, intermittent heating, loss of power to a controlled component, or erratic operation
• Designed to handle repeated switching cycles under normal appliance operating conditions

• One silicon controlled rectifier module

• Disconnect all power before servicing to avoid shock or injury
• Handle as an electronic component; avoid static discharge and mechanical stress
• May require soldering or secure mounting to a heatsink or chassis—follow the appliance wiring diagram

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This fresh food door handle provides a durable, finished grip for opening and closing the refrigerator fresh food compartment while restoring appearance after a damaged or worn handle. Designed to match brushed bronze finishes. What it does:

• Replaces a cracked, chipped, or broken fresh food door handle so the door opens and closes properly
• Restores the cabinet's appearance by matching brushed bronze trim and finish
• Provides a secure grip to prevent slipping or accidental drops
• Helps prevent further damage to the door exterior and seals caused by using a damaged handle

• One fresh food door handle (brushed bronze) as pictured

• Disconnect power (unplug fridge) before beginning any service
• Removal/installation typically requires basic hand tools; handle fastens to the door with screws or retainers—keep hardware if reusing
• Protect the door finish during installation; avoid overtightening fasteners

This USB port cover replaces a broken or missing cover on the appliance control panel to protect the USB connector from dirt and moisture. It restores a finished appearance and helps keep the port functional. What it does:

• Covers and protects the appliance USB port from dust, moisture, and accidental contact
• Prevents debris from entering the connector, reducing risk of connectivity issues
• Restores the control-panel appearance when the original cover is cracked or lost

• Disconnect power to the appliance before servicing to avoid shock or damage
• Accessible from the control panel; typically snaps into place or secures with small fasteners
• Inspect surrounding trim for damage and replace any broken clips to ensure a secure fit

This is a replacement Café hot water display assembly that restores the dispenser/control panel display for hot water settings, keeping the dispenser readable and functional. Fits white slate trim and matches original appearance. What it does:

• Shows hot water settings and status on the dispenser/control panel
• Restores display clarity when numbers or icons are dim, missing, or unresponsive
• Replaces cracked, faded, or cosmetically damaged display lens
• Helps the dispenser communicate ready/temperature indications used during dispensing

• 1 hot water display assembly (white slate)

• High-level replacement only; verify power is disconnected before starting
• Handle the display carefully to avoid scratching the lens or damaging connectors
• May require removing the dispenser/control housing; keep track of screws and fasteners

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

Center mullion hinge for bottom-mount refrigerators. Mounts between refrigerator and freezer doors to support door alignment and closing. Replace if cracked or broken.

Fix dim or uneven refrigerator lighting with a new LED light cover. This lens protects the LED module and ensures proper light distribution throughout your fridge.

Mounting bracket that secures and stabilizes refrigerator panels and assemblies. Replace when the original bracket is broken, cracked, or missing.

This support component helps freezer drawers or shelves slide smoothly in and out of the freezer compartment. Located inside the freezer on the side walls or bottom, replace it when drawers stick, won't slide properly, or have become loose and unstable.