Cgp650setss Parts

This board lead assembly is a replacement wire harness that connects the appliance control board to related components, restoring reliable electrical connections and signal paths. It helps address failures caused by damaged or corroded wiring. What it does:

• Re-establishes electrical connections between the main control board and peripheral components
• Restores consistent communication and power flow to affected circuits
• Can resolve intermittent operation, unresponsive controls, or component-specific faults when wiring is the cause
• Replaces frayed, burned, or loose connector leads to reduce risk of shorts

• Always disconnect power (unplug or shut off breaker) before starting any repair
• Handle the control board and connectors by the edges to avoid damage from static or flexing
• Verify connector orientation and seat firmly; do not force mismatched plugs

This orifice spud controls propane gas flow to a single range burner, allowing correct LP burner performance and flame size. It's a direct-fit replacement used when the burner needs the LP-specific orifice. What it does:

• Metering point that regulates propane (LP) gas to the burner so the flame burns correctly
• Required when converting a natural gas appliance to LP or replacing a worn LP orifice
• Sized for 9.1K (LP) flow rating to match the burner's designed output

• One orifice spud (LP 9.1K)

• Turn off gas supply and disconnect power before servicing
• Replace only with the exact LP orifice specified for the burner
• Hand-start the part, then tighten to manufacturer torque if provided; avoid over-tightening
• After installation, check all gas connections for leaks with a soap solution or a gas leak detector

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

This orifice spud controls LP gas flow to a cooktop burner, restoring proper flame size and reliable ignition. It's a direct-fit replacement designed for safe operation of the burner when the original spud is damaged or missing. What it does:

• Directs and meters liquid propane (LP) to the burner for correct flame characteristics
• Helps restore steady ignition and consistent, even flame distribution
• Common fix for weak, uneven, or no-flame burner symptoms
• Matches factory orifice sizing to maintain designed burner performance

• One orifice spud (LP, 5K)

• Turn off gas supply and power before servicing the appliance
• Only install on compatible burners using the correct LP orifice size for your appliance
• Use proper tools; do not force or cross-thread the spud
• After installation, check for gas leaks per local codes and manufacturer instructions

A small metal lock washer that secures fasteners and helps prevent nuts or bolts from loosening under vibration. Fits specific GE appliances where a locking washer is required to keep assemblies tight and stable. What it does:

• Provides a locking grip under a nut or head of a bolt to resist loosening from vibration
• Helps maintain secure connections on panels, brackets, or components
• Can stop intermittent rattling or movement caused by a loose fastener
• Used wherever the original equipment calls for a retaining/lock washer

• One lock washer as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate tools (needle-nose pliers or small wrench) and replace only in the original orientation
• Do not over-tighten fasteners — tighten just enough to compress the washer and engage locking feature
• Keep small parts away from children and pets

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This orifice spud secures the gas orifice to the oven burner tube, directing the fuel for proper combustion and a steady flame. It helps restore correct burner performance and consistent heating in gas ovens. What it does:

• Holds the gas orifice in place on the oven burner tube for proper fuel delivery
• Ensures a consistent, centered flame for even oven heating
• Can help address weak, uneven, or fluctuating burner flames
• Prevents gas leakage at the orifice connection when installed correctly

• Turn off the gas supply and unplug the appliance before beginning work
• Use basic hand tools; avoid overtightening to prevent thread damage

This switch cover replaces a cracked or broken control switch bezel to restore a clean, secure appearance and help protect the underlying switch from debris. It fits over the control switch area and keeps the knob seating stable. What it does:

• Covers and protects the exposed control switch from grease, food, and debris
• Keeps the switch assembly properly seated and aligned for reliable knob engagement
• Replaces cracked, warped, or melted bezels that prevent a flush fit
• Helps reduce risk of contaminants reaching the switch contacts

• Disconnect power to the appliance before starting any repair
• Remove control knobs and any trim necessary to access the cover
• Replace the cover by snapping or fastening it into place; do not force or bend the part
• If the underlying switch is damaged or loose, replace or secure the switch per OEM instructions

This LED control board is the refrigerator's electronic display and interface module that lets you view settings and status. Replaces a faulty display board to restore visible indicators and electronic control feedback. What it does:

• Powers and drives the LED display so temperature and status information is visible
• Provides the user interface signals for touchpads/buttons on the control panel
• Can cause dim or no display, unresponsive control panel, or missing status indicators when failing
• Works with the main control system to communicate user commands to the refrigerator electronics

• Disconnect power to the appliance before starting work to avoid shock or shorting circuits
• Handle the board by its edges and avoid touching components to reduce risk of ESD damage
• Remove the control panel or console trim as needed; keep track of screws and connectors
• Verify proper connector seating and test functions before reassembling the appliance

This orifice spud is the small gas inlet fitting that secures the burner orifice to the burner base, helping direct fuel to the burner for safe, consistent ignition and flame control. It replaces a worn or damaged inlet fitting to restore normal burner operation. What it does:

• Holds the burner orifice in the correct position so gas flows to the burner tube
• Helps produce a stable, even flame for reliable cooking performance
• Can correct symptoms such as weak, uneven, or hard-to-light burners
• Works with the burner assembly to maintain safe gas flow

• Turn off gas supply and disconnect power before servicing
• Allow the appliance to cool completely; use basic hand tools for removal/installation
• Hand-start and tighten threads carefully; avoid cross-threading or overtightening
• After installation, check for gas leaks at the connection using a soap-and-water solution (do not use an open flame)