Cgs700p2ms1 Parts

This electrode top and harness assembly directs high-voltage spark from the range/oven ignition system to the burner electrode so the burner lights reliably. Replaces a damaged or cracked electrode or frayed harness to restore spark delivery. What it does:

• Carries ignition voltage from the spark module to the electrode so gas can ignite
• Provides the ceramic-tipped electrode that produces the spark at the burner
• Commonly used when burners won't light, spark is weak or intermittent, or visible electrode damage is present
• Prevents arcing and misfires caused by cracked insulation or loose connections

• Disconnect power and shut off gas supply before starting work
• Handle ceramic electrode carefully; avoid bending or touching the tip
• Route and secure the harness per the factory routing to prevent heat damage or chafing
• Reconnect all terminals firmly and test ignition in a safe manner after restoring power/gas

This tangential blower circulates air across oven/microwave components to help cool electronics and maintain proper airflow. Replaces a worn or failed blower to restore cooling and reduce overheating risks. What it does:

• Moves air along the appliance's internal components to help dissipate heat
• Helps prevent overheating of control electronics and nearby parts
• Can stop whining or rattling noises when a worn fan is replaced

• One tangential blower assembly

• Disconnect power to the appliance before starting any repair
• Follow the appliance manufacturer's service instructions and wiring diagrams
• Handle with care around sharp sheet metal and fragile components

This is a stainless-steel machine screw used to secure components in appliances. Its #8-18 thread and 3/8" length provide a reliable, corrosion-resistant fastening where a short machine screw is required. What it does:

• Fastens panels, brackets, or small assemblies with a #8-18 threaded hole
• Resists rust and corrosion in humid appliance compartments
• Provides a short, secure hold where space is limited
• Compatible with standard #2 Phillips or compatible driver bit for installation

• Power off and unplug the appliance before servicing
• Use the correct driver to avoid stripping the head
• Do not overtighten; stop when snug to avoid thread or component damage
• If replacing multiple fasteners, reuse only the same size and type

This drawer bracket secures and supports a refrigerator/ freezer drawer, restoring proper alignment and load-bearing at the front or side mounting point. It's a simple replacement that helps the drawer open and close smoothly. What it does:

• Holds and supports the drawer to prevent sagging or tipping under normal loads
• Keeps the drawer aligned on its track for smooth operation
• Restores proper engagement with the cabinet so the drawer seats and latches correctly
• Helps prevent binding, catching, or uneven gaps when opening or closing

• Disconnect power to the appliance before servicing and work with the drawer empty.
• Remove the drawer and any trim as needed to access the bracket; use appropriate hand tools (screwdriver/socket) for fasteners.
• Reuse existing screws only if undamaged; replace fasteners if stripped or corroded.
• Align the bracket carefully before tightening to avoid binding; do not force or overtighten plastic components.

This automatic latch secures the appliance door during operation and releases it when the cycle finishes, helping the appliance run safely and reliably. It replaces a worn or broken latch to restore proper door closure. What it does:

• Secures the door so the appliance can start and complete cycles
• Releases the door at cycle end for unloading
• Commonly used when the door won't stay closed, the appliance won't start, or cycles stop unexpectedly
• Fits into the door/latch assembly location and interfaces with the door strike

• One automatic door latch

• Disconnect power before attempting any repair to avoid shock or injury
• Access usually requires removing the appliance door or front panel; keep fasteners organized
• Test door operation after installation to ensure latch engages and releases smoothly
• If other door components are damaged, inspect and replace them as needed for reliable operation

This tubular broil burner delivers the concentrated heat used for broiling in gas ovens, restoring high-heat cooking performance for crisping and browning. Replace a damaged or worn broil tube to recover even broil results. What it does

• Provides the primary heat source for the oven's broil function
• Replaces a cracked, warped or visibly damaged broil tube
• Restores consistent top-heat for browning and finishing foods
• Addresses symptoms such as weak or no broil heat and uneven broiling

• Disconnect power and shut off gas supply before beginning service
• Handle the tube carefully to avoid bending or damaging terminals
• Verify proper fit and orientation against the oven's broil bracket and igniter

This glass and touch board assembly replaces the control panel glass and touch interface to restore responsive controls and the appliance's appearance. It's the complete front touch surface and electronics used to select functions and settings. What it does:

• Replaces cracked, scratched, or nonresponsive glass touch surfaces
• Restores touch-input responsiveness for oven/range controls and function selection
• Replaces the front user interface that houses the display and touch sensors
• Helps resolve intermittent or unresponsive touch buttons and control-panel errors

• Disconnect power at the breaker before starting work to avoid electric shock
• Handle glass carefully to avoid breakage and wear protective gloves if needed
• Remove trim and mounting screws gently; align connectors and secure fasteners without over-tightening

Right hand side

A receiver hinge that secures and supports an oven door hinge pin to keep the door aligned and operating smoothly. Replaces a worn or broken receiver to restore proper door fit and movement. What it does

• Accepts and retains the oven door hinge pin so the door opens and closes correctly.
• Supports door weight to prevent sagging or uneven alignment.
• Helps the door latch and seal properly for safe, consistent operation.
• Commonly replaced when the door drops, rubs, or will not stay closed.

• One receiver hinge

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Remove the oven door or access panel per the service manual for safer installation.
• Use basic hand tools; check hinge pins and mating hardware for wear and replace if needed.

This glow-bar oven igniter lights the gas burner. When energized, it heats and draws current through the safety valve so the bake or broil flame ignites reliably and the oven reaches the set temperature. What it does:

• Heats and ignites the oven's bake or broil burner
• Draws the correct current to open the gas safety valve
• Can address no-heat or no-ignition conditions
• Helps resolve very slow preheat or inconsistent oven temperatures
• Useful when the igniter glows but the burner never lights

• 1 glow-bar igniter

• Disconnect power and shut off gas supply before servicing
• Access from the oven cavity; remove racks, oven bottom, and flame spreader as needed
• Handle the igniter carefully—element is fragile; avoid touching the carbide/ceramic tip
• Secure connections and route wires away from flames and high-heat areas; test operation after reassembly

The BURNER VALVE is an OEM part for GE gas ranges. It regulates gas flow to individual cooktop burners, controlling flame size and heat output based on valve position.

Symptoms of a bad burner valve include: 

• Inability to adjust or maintain desired flame levels
• Gas odor or clicking/hissing noises from the burner area  
• Burners that remain constantly on without response to controls

Gas valves can weaken or crack over many heating/cooling cycles. Mineral buildup may also restrict precise flow regulation. Replacing the faulty valve with this genuine GE part restores the burners' heat-adjustable functionality for custom cooking power. 

This OEM GE replacement burner valve is also compatible with some Kenmore and RCA gas range models. Reliable control over burners maximizes versatility and safety.
 

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This oven light gasket fits between the glass lens and the oven liner. It restores a proper seal around the light opening to help keep grease and moisture out of the light cavity and hold the lens securely in place. What it does:

• Seals the joint between the oven light lens and the cavity wall
• Helps prevent grease and moisture from entering the light assembly
• Keeps the lens snug to reduce looseness or rattling
• Replace if the gasket is cracked, flattened, brittle, missing, or if moisture/grease is visible around the lens

• One oven light lens gasket

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/retainer as your model requires (unscrew lens or release clips)
• Note gasket orientation and clean the mating surfaces
• Seat the new gasket evenly and reinstall the lens; do not overtighten the glass

This range burner valve controls gas flow to a single stovetop burner to restore reliable ignition and consistent flame control. Use it to replace a worn or leaky valve and help return safe, stable burner operation. What it does:

• Regulates gas delivery to one burner for proper ignition and flame adjustment
• Stops or reduces gas flow when the control is turned off to prevent leaks
• Helps resolve symptoms such as burners that won't light, weak or uneven flames, or persistent gas smell near a burner
• Works as the valve assembly that connects the cooktop knob to the burner gas line

• Turn off gas supply and electrical power to the appliance before beginning service
• Use appropriate tools and pipe sealant rated for gas if re-connecting gas lines
• After installation, test all connections for leaks with a soap solution or approved leak detector

The Convection Motor is an OEM part for GE gas ranges. It is the component responsible for circulating hot air around food inside the oven cavity during convection cooking cycles. 

Causes of a bad convection motor include failed windings, worn bearings, or damage from excess heat over time.

Symptoms of a bad convection motor include:

• Inability to select convection cooking functions 
• Lack of air movement inside the oven
• Slower than normal cooking times 
• Uneven baking or roasting results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This inject burner assembly replaces a damaged or worn hob injector to restore proper gas flow to a cooktop burner. It provides the correct metered fuel delivery for consistent ignition and stable flame control. What it does:

• Directs and meters gas from the manifold into the burner for predictable burning
• Helps burners light promptly and maintain an even flame
• Can resolve weak flames, uneven heating, or failure to light when caused by the injector
• Works with the burner head and cap to form the complete burner flame assembly

• Turn off the gas supply and unplug the appliance before starting any work
• Inspect gaskets and fittings for leaks; replace or tighten per manufacturer guidance
• Use proper tools and follow OEM diagram orientation for correct installation