Cs94000acw Parts

Door hinge replacement that restores proper door alignment and smooth opening and closing for compatible appliances. Installs in place of a worn or damaged hinge to reduce door sag, improve sealing, and stop binding. What it does:

• Provides the pivot point that allows the door to open and close smoothly.
• Keeps the door aligned to maintain an even seal and prevent gaps that cause temperature loss.
• Replaces a bent, worn, or damaged hinge that can cause door sag, rubbing, or binding.
• Helps reduce noise or rough movement when opening or closing the door.

• Disconnect power (unplug or shut off the circuit) before beginning any repair.
• Support the door during removal and installation to prevent it from dropping or becoming damaged.
• Use appropriate hand tools and follow the appliance manufacturer's instructions; tighten fasteners securely but avoid overtightening.

The Oven door hinge is an OEM part for GE ranges. This right side hinge is responsible for securely and smoothly opening and closing the oven door. It allows for comfortable access in and out of the oven cavity.

Causes of a bad hinge can include wear and tear from repeated opening and closing of the door over time, stress from excessive weight on the door, or damage from impact.

Symptoms of a bad hinge include:

• The door not opening or closing properly
• Increased resistance or hesitation when operating the door
• Loosening or sagging of the door
• Uneven gaps around the door frame

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This liner drawer replaces a damaged or cracked inner refrigerator drawer to restore storage and containment in the fresh-food compartment. Durable molded plastic matches original fit for smooth sliding and easy cleaning. What it does:

• Replaces a broken, cracked or warped inner drawer that can no longer hold items securely
• Restores proper alignment so the drawer opens and closes smoothly
• Helps contain spills and keeps produce or packaged foods separated
• Improves interior organization and usable shelf space

• 1 liner drawer

• High-level replacement: remove contents, lift out old drawer and slide in the replacement; your model diagram for exact removal steps
• Use care to avoid scratching interior surfaces; wear gloves to protect hands from sharp edges
• Verify correct orientation and track engagement before loading the drawer
• If the drawer slides or tracks are damaged, inspect and replace those parts separately

This replacement knob assembly restores control of a range/stovetop burner by providing a secure, splined interface with the control shaft. It replaces a cracked, loose, or missing front burner control knob so you can adjust heat safely and accurately. What it does:

• Replaces a damaged or missing left-front or right-front control knob so the burner can be selected and adjusted
• Provides a secure fit on the control shaft to prevent slipping or accidental changes
• Helps eliminate cracking, chipping, or worn spline issues that make the knob hard to turn
• Restores tactile control for precise temperature selection

• One knob assembly for a left-front or right-front control

• Disconnect power to the appliance before starting; if the appliance uses gas, turn off the gas supply
• Pull the old knob straight off the control shaft; align splines and push the new knob firmly onto the shaft
• Test knob operation after installation; do not force if misaligned—re-seat and try again
• If control or switch is damaged, replace that component rather than forcing a knob onto a damaged shaft

This infinite switch center is the replacement control assembly that regulates heat levels for an electric cooktop surface burner, restoring adjustable temperature control and reliable cycling. Ideal when a surface element fails to change settings or heat properly. What it does:

• Controls the variable heat settings for a surface burner so you can select low-to-high temperatures.
• Regulates on/off cycling of the element to maintain the chosen heat level.
• Commonly replaces units that cause a burner to not heat, stay on high, or not respond to the knob.
• Works as the central switching assembly for the affected surface element control circuit.

• One infinite switch center assembly.

• Disconnect power to the appliance at the breaker or unplug before starting any work.
• Use proper tools and take care removing the cooktop or control panel to access the switch; follow the appliance's service instructions.
• Verify terminal locations and wiring match the replacement before connecting.
• After installation, restore power and test all settings.

This Haliant 6" heating element replaces a damaged or worn oven element to restore proper cooking and baking performance. It provides the heating surface needed for even temperature recovery and consistent results. What it does:

• Heats during bake/broil cycles to generate oven cooking temperatures
• Restores heat when a failed element causes little or no oven heat
• Helps correct uneven cooking or long preheat times caused by element failure
• Matches the OEM Haliant design for fit and function when compatible

• Disconnect power to the appliance before servicing to avoid shock
• Allow the appliance to cool fully before touching the element or inside surfaces
• Replace using proper mounting hardware and electrical connections; ensure secure, tight terminal connections

Includes 12 screws.

This PSC convection fan motor circulates hot air for even oven cooking and restores proper convection function. Designed to replace a worn or failed motor to help ovens heat more uniformly and maintain set temperatures. What it does:

• Drives the oven convection fan to move heated air for consistent baking and roasting
• Helps correct uneven cooking or longer-than-normal cook times when the fan isn't running
• Stops humming, squeaking, or failing to start if the original motor is worn
• Restores airflow needed for convection modes without changing oven controls

• Disconnect power to the appliance before starting any repair
• Handle carefully to avoid damage to the motor shaft and fan; protect wiring and connectors
• If you see damaged connectors or wiring, replace those components before powering the oven