Cwe23sp4mw2 Parts

This quick-connect clip secures 5/16-inch water tubing in push-to-connect fittings to prevent accidental release and leaks at the joint. Restore a reliable hold on dispenser and icemaker lines when the original clip is missing or damaged. What it does:

• Locks the release ring (collet) on a 5/16-inch quick-connect fitting to retain tubing
• Helps prevent water drips or leaks at the connector
• Keeps tubing from slipping out, supporting steady water flow to dispenser/ice maker
• Common symptoms: leak at fitting, loose/disconnected tubing, no/low water or ice

• 1 quick-connect clip (5/16)

• Unplug the appliance and shut off the water supply; dispense water to relieve line pressure
• Ensure the tubing end is cut square; push it fully into the fitting until seated
• Insert the clip beneath the fitting's collet to lock; tug gently to verify retention
• Restore water and power, then check all connections for leaks

• Designed for 5/16-inch OD water tubing quick-connect fittings

This guide roller is used in the vegetable/crisper pan area. It supports and guides the drawer along its track so it glides smoothly and stays aligned when opening and closing, replacing a worn, cracked, or missing roller.

• Supports the vegetable/crisper pan on its slide path to reduce friction
• Helps the drawer roll in and out smoothly and evenly
• Maintains alignment to prevent binding, sagging, or the pan dropping off the track
• Common symptoms: drawer hard to open/close, wobbles, scrapes, or a visibly broken/missing roller

• Disconnect power before servicing
• Remove the crisper drawer and cover/shelf as needed for access
• Detach the damaged roller from its mount and attach the new roller securely
• Reinstall components, confirm smooth, even travel, and test drawer operation

This holder element assembly secures the appliance's heating element in the correct position so the element stays stable for consistent operation and safe performance. It's a direct-fit replacement for worn or damaged holders. What it does:

• Secures and supports the heating element inside the appliance to maintain proper alignment
• Prevents element sagging or contact with other components that can cause noise or arcing
• Helps reduce vibration and movement that can lead to intermittent heating
• Common symptom: visible holder damage, loose or shifted element, unusual noise during operation

• Disconnect power (unplug or switch off breaker) before starting any repair
• Allow appliance and element to fully cool before handling
• Handle the element and holder carefully to avoid bending or damaging the element

This hinge center assembly replaces the refrigerator's right-side hinge pivot to restore proper door alignment and smooth opening. It helps reduce door sag and improves sealing for better performance. What it does:

• Provides the central pivot point for the right refrigerator door hinge
• Restores correct door alignment and even closing when the door is sagging or crooked
• Reduces rubbing, binding, or grinding noises from the hinge area
• Helps maintain an effective door seal to prevent cold air loss

• One hinge center assembly (right side)

• Unplug the appliance and empty or support the door before starting work
• Support or brace the door while removing hinge fasteners to prevent dropping
• Reuse existing screws/bolts unless new hardware is specified by the manufacturer

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This meat pan divider separates foods inside the deli/meat pan to prevent cross-contact and keep items organized for easier access. It restores the original compartment layout so deli trays stay separated and tidy. What it does:

• Fits into the refrigerator's meat/deli pan to create separate sections for different foods
• Prevents items from shifting and mixing during drawer use
• Helps contain juices and reduces cross-contamination between foods
• Useful when cracked, missing, or warped dividers allow foods to mingle

• Slide the divider into the existing grooves or slots in the meat/deli pan; no tools typically required
• Clean surfaces and sanitize the divider before first use
• Do not use in the oven or expose to open flame; intended for refrigerator use only
• Inspect for proper seating after installation to ensure secure separation

2 wire insulator.

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This is a replacement bottom divider basket. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a cracked or defective divider basket in a variety of different refrigerator models. This divider basket is intended for the bottom drawer of the refrigerator.This divider slots into the center of the bottom refrigerator basket. It can be used to divide the basket drawer into two sides to keep food separated and organized. Over time and with regular use, the divider can become broken or cracked and will require replacing. For safety purposes, always ensure the refrigerator is completely disconnected from its power source before starting any repair work. No special tools are needed to install this part; simply slot the divider into place. Please make sure to follow appropriate safety precautions when attempting to fix any appliances. For more accurate information on how and where to install this bottom divider basket, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this divider basket is suitable for use on several different models of refrigerators manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable plastic and is sold individually.

This genuine replacement screw secures appliance panels and components where a short 8-18 x 1/2 in fastener is required, restoring proper fit and preventing rattles or loose parts. What it does:

• Secures panels, brackets, trim, and small components
• Restores tight fit where stripped or missing screws cause vibration or rattling
• Matches OEM thread and length for reliable fastening
• Prevents gaps that can trap dirt or interfere with operation

• One screw

• Use the correct Phillips screwdriver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Disconnect power and remove any panels as required before working near electrical components
• Replace only with the exact OEM screw to maintain proper fit

This cover harness is the factory-style electrical connector assembly that links components behind the appliance cover, restoring secure, routed wiring and reliable connections for proper operation. What it does:

• Provides factory routing and secure electrical connections between controls and internal components
• Replaces damaged, frayed or corroded wiring that can cause intermittent operation
• Helps prevent loose terminals and arcing that may lead to component failures
• Used when cover-mounted connectors or wiring no longer seat or pass power reliably

• One cover harness

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle wiring and terminals carefully; do not force connectors—align and seat fully
• Route harness as original, using existing clips and fasteners to avoid pinching or chafing

This fresh food door handle provides a durable, finished grip for opening and closing the refrigerator fresh food compartment while restoring appearance after a damaged or worn handle. Designed to match brushed bronze finishes. What it does:

• Replaces a cracked, chipped, or broken fresh food door handle so the door opens and closes properly
• Restores the cabinet's appearance by matching brushed bronze trim and finish
• Provides a secure grip to prevent slipping or accidental drops
• Helps prevent further damage to the door exterior and seals caused by using a damaged handle

• One fresh food door handle (brushed bronze) as pictured

• Disconnect power (unplug fridge) before beginning any service
• Removal/installation typically requires basic hand tools; handle fastens to the door with screws or retainers—keep hardware if reusing
• Protect the door finish during installation; avoid overtightening fasteners