Cwe23sp4mw2 Parts

The Icemaker Fill Tube Heater is an OEM component specifically designed for GE refrigerators. Located near the icemaker assembly, this heating element plays a crucial supporting role.

Symptoms of a bad fill tube heater include:

• Irregular or inconsistent ice production amounts  
• Cracked, cloudy or malformed ice cubes being generated
• The icemaker failing to operate or stop working altogether
• Water or moisture around the refrigerator icemaker area 

Causes can include wear over time from powering on during each ice-making cycle. Mineral deposits may also form and insulate the heating surface, reducing effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Quick Space Shelf is an OEM component for GE side-by-side refrigerators. With adjustable sliding shelves on silver tracks, it provides flexible small-item organization and storage optimization. Convenient access relies on functional shelving. 

Symptoms of a faulty quick space shelf include:  

• Shelves sticking or jamming during movement along tracks
• Difficulty retracting or extending shelves fully  
• Warped or cracked plastic interfering with balanced item placement

Causes involve repetitive overloading weakening mounting rails, moisture exposure distorting shelf material integrity, or wearing of track rollers inhibiting smooth sliding over extended use.

Replacing with this genuine GE shelf ensures dependable quick access storage through resiliently engineered shelving. Compatible for Hotpoint, RCA, or Kenmore units seeking small area preservation and convenient retrieval of condiments or snacks.

This replacement drain tube channels defrost and condensation water from the evaporator area to the drain pan, helping prevent water pooling and ice build-up in the fresh-food section. Restores proper drainage when the original tube is damaged. What it does:

• Directs defrost/condensation water to the drain pan during the refrigerator's automatic defrost cycle.
• Helps stop water pooling inside the fresh-food compartment and under crisper drawers.
• Reduces risk of frost or ice buildup near the evaporator when the original tube is cracked, kinked, or clogged.
• Provides a direct-fit replacement for the factory drain path when specified by OEM part number.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Remove food and drawer assemblies as needed to access the evaporator/drain area; some residual ice or water may be present.
• Clear any drain blockages and ensure the tube is seated without kinks so water flows freely to the drain pan.

The Freezer Lower Slide is an OEM replacement part for GE refrigerators. It is designed to provide smooth and easy movement of the freezer drawer, allowing for convenient access to your frozen goods.

A bad freezer lower slide can occur due to factors such as wear and tear, damage, or misalignment. If you notice symptoms such as difficulty in sliding the freezer drawer, a loose or broken slide, or an unstable freezer compartment, it may indicate a faulty or malfunctioning left freezer lower slide.

Symptoms of a bad freezer lower slide include:

• Difficulty in sliding the freezer drawer
• Loose or broken slide
• Unstable freezer compartment

Restore your refrigerator's freezer drawer by replacing the faulty left freezer lower slide with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Door Bin is an OEM replacement part for GE refrigerators. It is designed to fit on the refrigerator door, providing storage space for bottles, jars, and other items.

A bad door bin can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as a cracked or broken rack, difficulty in storing items on the door, or items falling off the rack, it may indicate a need to replace the door bin.

Signs of a faulty door bin include:

• Cracked or broken shelf
• Difficulty in storing items on the door
• Items falling off the shelf

Restore your refrigerator's door by replacing the faulty door bin with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

This glide support secures and guides a refrigerator drawer so it opens and closes smoothly, helping restore proper alignment and load-bearing for the left-side drawer. Ideal when the drawer slips, binds, or drops out of its track. What it does:

• Supports the drawer glide/slide mechanism on the left side and keeps the drawer tracking correctly
• Prevents the drawer from sagging, catching, or falling out when pulled
• Restores smooth, even drawer movement and reduces binding or rough operation
• Works with the refrigerator's existing slide hardware to carry drawer weight safely

• Unplug the appliance before starting any repair to avoid shock or injury
• Remove the drawer and existing glide hardware to access mounting points; basic hand tools (screwdriver) typically required
• Inspect mating slide components for wear and replace both sides if damaged for best performance

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This left-side hinge top pin assembly secures the refrigerator door to the cabinet hinge, restoring proper alignment and smoother door movement. Use it to replace a worn or damaged top hinge pin for improved closing and reduced door sag. What it does:

• Secures the door at the cabinet top and provides the pivot point for opening and closing
• Replaces worn or bent pins that can cause door sag, misalignment, or rubbing
• Helps the door close more evenly and maintain a consistent seal
• Works with the existing hinge components to restore smooth hinge action

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing and installing hinge parts to prevent dropping or damage
• Basic hand tools are typically required; follow the appliance manufacturer's service instructions
• Replace all affected components for a secure fit

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling

The Compressor is an OEM component specifically designed for GE top-mounted and bottom-mounted refrigerator freezers. Responsible for circulating refrigerant, its robust motor compressively moves gas to chill interiors reliably. Permanent lubrication withstands constant operation.

Symptoms of a faulty compressor commonly involve cycling off too frequently or inefficient temperature regulation. Loss of pressure from degradation risks expensive repairs necessitating replacement. 

Causes of a bad compressor relate to typical wear reducing circulation. Over-activation exposes motor windings to damage requiring timely change.

Causes of a bad compressor can involve:

• Failure to maintain set temperatures 
• Frost buildup impairing performance
• Vibrations transferring to cabinetry

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire refrigerators. Replace to retain steady refrigeration preserving freshness for dependable operation long-term.
 

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs

This upper divider basket replaces the removable compartment divider used to separate items in the appliance's storage basket, helping keep contents organized and accessible. It restores the intended layout and containment for smaller items. What it does:

• Separates and organizes items inside the upper basket to prevent shifting and mixing
• Restores proper fit and containment when the original divider is cracked, broken, or missing
• Helps maintain airflow and access to stored items by keeping compartments tidy
• Visible, molded replacement that matches the original mounting points and profile

• One upper divider basket

• Empty the basket and remove any shelves or trays needed to access the divider before installing
• Inspect mounting tabs or slots for damage and align the part with the original attachment points for a secure fit
• Use care to avoid forcing clips; damaged clips may require replacement of the mounting hardware