Dacor Pmor30b Parts

This thermostat is a temperature-sensing switch used in select appliances to control operation or provide over-temperature protection. It opens or closes the circuit at a calibrated point to help maintain proper, consistent performance. What it does

• Senses temperature at its mounting/location and switches contacts at a set point
• Regulates cycling of the system or ends a heating/cooling/defrost event as designed
• Helps prevent overheating or overcooling conditions and protects components
• Supports stable, reliable operation when the original thermostat fails

• Runs continuously or won't cycle off
• Shuts off too soon or won't turn on
• Inconsistent temperature (too warm/too cold)
• Erratic cycling or failure to maintain set temperature

• 1 thermostat

• Disconnect power before servicing; allow any hot surfaces to cool
• Note wire positions; move leads one at a time to the new thermostat
• Mount in the original location and orientation; ensure firm contact/fit
• Route any sensing bulb/capillary exactly like the original; avoid kinks

Microwave not heating or running weak? The capacitor stores electrical energy to power the magnetron. Common failure causes no heat or sparking issues.

Microwave not heating? This diode directs current flow to the magnetron and protects control circuits. Quick install restores heating when failed.

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

This thermostat monitors the internal temperature of the microwave and helps regulate heating to prevent the appliance from overheating. It acts as a safety device that cuts power to certain components if temperatures exceed safe limits. Replace this thermostat if the microwave shuts off unexpectedly during use, fails to heat properly, or if diagnostic testing shows the thermostat is no longer opening or closing at the correct temperature.

Stamped metal mounting bracket that secures internal components to the microwave frame. Replace if cracked, bent, or missing to restore proper alignment.

This is a humidity sensor that detects moisture levels inside the microwave cavity during cooking. It works with the control board to automatically adjust cook times and power levels when using sensor-based cooking modes. Replace this sensor if the microwave overcooks or undercooks food on auto-sensor settings, or if you receive a sensor error code on the display.

Mounting bracket for microwave ovens. Secures the unit to wall or cabinet. Replace if bent, cracked, or missing to ensure safe installation.

This replacement lever restores the original lever action so your appliance opens, closes or engages controls smoothly. It's a direct-fit part that replaces a cracked, worn or broken lever to regain normal operation. What it does:

• Replaces a damaged lever that prevents a door, latch or control from operating properly
• Provides a secure pivot or release point so components engage and disengage as intended
• Common symptom fixes: lever broken, loose, stuck, or not engaging reliably
• Durable plastic construction matches the OEM fit and alignment

• Disconnect power or unplug the appliance before starting any repair
• Remove any nearby panels or fasteners to access the existing lever; retain screws for reassembly
• Align the new lever on its pivot, then snap or fasten it into place without forcing parts

This is a replacement tension spring that restores proper tension and movement on compatible Frigidaire appliance components. It helps the mechanism operate smoothly and reduces sagging, binding, or uneven motion. What it does:

• Provides tension for hinge or linkage assemblies so doors or moving parts return and stay aligned
• Restores smooth, controlled movement and reduces slapping or sudden drops
• Helps prevent binding or uneven operation caused by a weakened or broken spring
• Commonly used where a small coil spring is required to maintain part position or preload

• One tension spring

• Disconnect power and remove food/items before accessing appliance interiors or doors
• Use gloves and eye protection; springs can be under tension and may release suddenly
• Note spring orientation and attachment points before removal so reassembly matches OEM positioning

This mechanical thermostat controls refrigerator temperature by sensing evaporator or cabinet temperature and switching the compressor and fans on and off. Replaces a worn or faulty control to help restore consistent cooling and temperature regulation. What it does

• Senses temperature and closes/open circuit to run the compressor and cooling fans
• Helps maintain set temperature by cycling refrigeration system components
• Commonly linked to symptoms like warm or fluctuating temperatures, compressor not running, or continuous running
• Works as the control point for user temperature settings

• One thermostat

• Disconnect power to the appliance before accessing controls to avoid shock or injury
• Access may require removing interior panels or control housing
• Handle sensing bulb and capillary tube carefully to avoid kinks or damage

This replacement lever restores reliable manual control of the appliance component it attaches to, letting the door, dispenser or mechanism operate smoothly and predictably. Durable molded construction resists wear from normal use. What it does

• Replaces a broken, cracked or worn lever that no longer engages or pivots correctly
• Restores proper mechanical linkage so doors, latches or dispensers can open and close as intended
• Prevents slipping, binding or intermittent operation caused by damaged lever geometry
• Matches the OEM shape to fit mounting posts and pivots without modification

• One replacement lever

• Disconnect power (and water if applicable) before starting any repair
• Remove the panel or housing that covers the lever mounting area to access fasteners and clips
• Keep small screws and clips organized; lever typically secures on a post or with a retaining clip

This is an electrical noise filter designed to suppress electromagnetic interference generated by the microwave's internal components. It connects inline with the power supply to prevent electrical noise from affecting the microwave's operation or other nearby electronics. Replace this filter if your microwave displays erratic behavior, produces unusual buzzing sounds, or interferes with other appliances on the same circuit.

This evaporator fan assembly circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling. Replaces a worn or failed fan to restore airflow. What it does:

• Spins to move cold air across the evaporator coil and into the appliance interior
• Commonly linked to symptoms like unusual noise, weak cooling, or no airflow in compartments
• Helps prevent frost build-up by maintaining steady airflow over the coil
• Works with the appliance's evaporator motor circuit and fan housing

• One evaporator fan assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or the evaporator cover; follow your model's service instructions
• Handle the fan blades and motor carefully to avoid damage; avoid contact with sharp sheet metal and edges
• Test the fan operation after reassembly and restore all panels and fasteners

This front trim grill restores the appliance's finished look and protects the lower vent area from debris. It's a direct-fit replacement that keeps the front of the unit looking clean and helps maintain proper airflow at the base. What it does:

• Covers and protects the lower front vent/opening from dust and large debris
• Restores damaged, cracked, loose or missing trim for a finished appearance
• Helps direct airflow at the appliance base for normal ventilation
• Secures to the cabinet with snap tabs or screws depending on model

• One replacement grill

• Disconnect power to the appliance before attempting any service
• Remove any retainers or screws holding the old grill; many grills snap into place
• Align tabs carefully and press or secure with screws until seated; avoid forcing to prevent damage
• Retain original fasteners if reinstalling

This replacement motor restores power to the appliance's fan or blower assembly so airflow and cooling performance resume. Use it to replace a failed or noisy motor and get your appliance running normally again. What it does

• Spins the fan/blower or driven component to circulate air or operate the mechanism.
• Replaces motors that stall, hum, or do not run at all.
• Can resolve reduced airflow, warm compartments, or uneven cooling when motor failure is the cause.
• Designed to match the appliance's original motor function and mounting.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Verify the motor part number and physical fit against the unit before installation.
• Basic hand tools required; access may require removing panels or shelves.