Dd24dctx9 Parts

This clip link support is a small mounting clip used to secure linkages and cables inside the appliance, keeping moving parts aligned and preventing binding. It helps restore proper motion and reduces noise from loose linkages. What it does:

• Secures a linkage or cable to the cabinet or component bracket to maintain correct alignment
• Prevents linkages from shifting, which can cause sticking, binding, or improper operation
• Helps reduce rattling or knocking noises caused by loose or disconnected links
• Restores intended movement of door/valve/actuator linkages when the original clip is worn or broken

• One clip link support

• High-level replacement; remove power before accessing internal components
• Inspect surrounding linkage and fasteners for wear while installing the clip
• Use care not to damage nearby wires, hoses, or components when snapping the clip in place

This right-side lid yoke secures and supports the washing machine lid hinge so the lid opens and closes smoothly and stays aligned. It restores proper lid fit and helps prevent binding or uneven wear at the hinge. What it does:

• Supports the lid hinge assembly on the right side, keeping the lid aligned
• Transfers load between the lid and cabinet hinge to prevent sagging
• Helps the lid latch and close cleanly so the machine can operate normally
• Common symptom fixes: lid wobble, uneven closing, noise at the hinge, or lid misalignment

• Disconnect power to the appliance before starting any repair.
• Use basic hand tools; follow the manufacturer's service instructions for hinge removal and reassembly.
• Inspect adjacent hinge hardware and fasteners; replace any damaged components for best results.

This left-side lid yoke secures and guides the washer lid assembly so the lid opens and closes smoothly and stays aligned. Replaces a worn or broken yoke to restore proper lid movement and prevent binding. What it does:

• Supports the lid hinge on the left side and helps keep the lid aligned during use
• Prevents the lid from wobbling, sticking, or catching when opening or closing
• Works with the lid hinge and strike to maintain a secure fit and smooth operation
• Commonly replaced when the lid is cracked, damaged, or loose

• One left-side lid yoke

• Disconnect power and water to the appliance before starting any repair
• Remove the lid and any trim necessary to access the yoke; retain fasteners for reassembly
• Inspect mating hinge and strike for wear and replace if damaged to ensure proper function

The Tablet Tray Insert is an OEM part for Fisher & Paykel dishwashers. It is a removable component designed to hold and secure dishwasher tablets or detergent packs during the wash cycle.

Causes of damage to the tablet tray insert can include exposure to high heat, moisture, or chemical residue over time, as well as general wear and tear from repeated use.

Symptoms of a need to replace the tablet tray insert include:

• Cracks, warping or damage to the existing insert
• Difficulty inserting or removing detergent tablets
• Detergent tablets not dispensing properly during the cycle

This harness and fan assembly supplies the electrical connections and blower fan needed to restore airflow and cooling in compatible Fisher & Paykel appliances. It replaces a damaged harness or failed fan to help re-establish proper ventilation. What it does:

• Provides the wire connections and mounted fan used to move air for cooling, venting or drying cycles
• Restores airflow when a unit has reduced or no air movement
• Can address symptoms such as a noisy fan, intermittent fan operation, or overheating warnings
• Secures wiring and fan in the original mounting location to maintain safe operation

• Disconnect power to the appliance before attempting any service
• Inspect connectors and routing; match OEM connector orientations during installation
• Use basic hand tools and avoid pinching wires; replace any damaged clips or fasteners

A lower chassis wiring harness that routes power and signals between the dishwasher base components and the control area, restoring proper electrical connectivity and reliable operation. What it does:

• Connects motors, valves, sensors and control wiring located in the lower chassis to the main wiring system
• Replaces damaged or frayed wiring that can cause intermittent operation or loss of function
• Helps stop wiring-related faults like no-power to lower components or erratic part behavior
• Maintains factory routing and secure connector fit for correct electrical performance

• Disconnect power (unplug or shut off breaker) before starting any repairs
• Take photos of existing routing and connector locations to ensure correct reinstallation
• Route harness along original clips and secure all connectors until they click; avoid pinching

The Spray Arm Assembly is an OEM part for Fisher & Paykel dishwashers. It is responsible for evenly distributing water and cleaning solution throughout the dish rack during the wash cycle. The spray arm assembly features holes that rotate, ensuring all dishes are thoroughly rinsed and sanitized. 

Symptoms of a faulty spray arm assembly include:

• Poor or uneven cleaning and rinsing results
• Caking or spots left behind on dishes  
• Mineral or limescale buildup inside the dishwasher

Causes can be mineral deposits or food residue clogging spray arm holes over time. Repeated impact or damage reduces the assembly's spray pressure and distribution.

This Herbie-type E hose clamp secures flexible appliance hoses to fittings to help prevent leaks and keep water lines in place. Simple, durable design for a clean, reliable hose connection. What it does:

• Holds appliance hose firmly on barbs and fittings to reduce slipping and leakage
• Commonly used on drain, vent or water lines where a low-profile clamp is needed
• Helps stop intermittent drips or puddling caused by a loose hose connection
• Provides a retained clamping force that resists vibration and normal use

• One Herbie-type E hose clamp

• Disconnect power and water supply before servicing the appliance
• Use pliers to compress and fit the clamp; ensure it sits squarely over the hose barb
• Avoid twisting the hose when installing; trim damaged hose ends and replace if necessary
• Inspect clamp for corrosion or damage and replace if it does not spring back or hold securely

A replacement support drain hose that secures and positions the appliance drain hose to prevent kinks and improper routing. Keeps the drain line stable so wastewater flows freely and reduces strain on connections. What it does

• Holds the appliance drain hose in the correct position to prevent kinks and pinching
• Helps maintain proper drainage and reduces the chance of standing water or slow drains
• Reduces stress on hose connections to help prevent leaks at fittings
• Useful when the original support is broken, cracked, or missing

• One support drain hose

• Always disconnect power and shut off water supply before beginning work
• Reuse original clamps or install new clamps as required; secure hose firmly but do not overtighten
• After installation, run a short cycle and inspect for proper drainage and any leaks

This drain hose joiner connects two sections of dishwasher drain tubing to restore a continuous drain path and stop leaks. It's a simple replacement part that helps get your dishwasher draining normally again. What it does:

• Joins two drain hoses securely so water flows from the dishwasher to the household drain
• Reduces leaks at a broken or separated hose connection
• Addresses symptoms like water pooling under the dishwasher, slow draining, or visible leaks near the hose
• Works where a damaged or split hose end needs a reliable connector

• Disconnect power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean, square cuts for best seal if needed
• Securely clamp both hose ends to the joiner using appropriate hose clamps

A genuine replacement foot that restores stability and proper leveling for your appliance. Replaces worn or damaged feet to reduce wobble, prevent uneven operation, and protect floors from movement and scratches. What it does

• Provides a stable support point to keep the appliance level and steady during use
• Helps eliminate rocking or vibration that can cause noise or uneven function
• Protects flooring by creating a durable contact surface between appliance and floor
• Allows minor height adjustment (where applicable) to compensate for uneven floors

• Disconnect power and water (if applicable) and move the appliance to a safe, accessible location before starting
• Support the appliance to prevent tipping; use a helper or appropriate jack/blocks for heavy units
• Thread or press the foot into place per the original mounting method; hand-tighten and test level before final seating

A lower base rack assembly that supports dishes and cookware and restores proper loading and sliding function in the dishwasher. Replaces a worn, bent, or damaged lower rack to keep items secure during cycles. What it does:

• Provides a stable, slotted support surface for plates, bowls and cookware on the lower level
• Restores smooth sliding and proper alignment if the lower rack is warped or misaligned
• Prevents dishes from tipping or contacting the tub when the rack is damaged
• Matches OEM mounting points and rack geometry to fit and operate like the original

• Disconnect power and turn off water supply before removing or installing the rack.
• Remove lower rack stops and slide the old rack out; align rollers and guides before inserting the new rack.
• Inspect roller wheels and guides for wear; replace if needed to ensure smooth operation.
• Handle carefully to avoid scratching the tub finish.

This upper fill hose routes incoming water from the appliance inlet to the fill assembly, restoring proper water delivery for wash or fill cycles. It's a direct-replacement part used to repair leaks or interrupted fill. What it does:

• Directs incoming water to the appliance's fill assembly so cycles can start and run correctly.
• Replaces cracked, split, or kinked tubing that can cause slow fills, no-fill conditions, or leaks.
• Restores a proper sealed connection when hose fittings or old tubing become brittle.
• Helps prevent water damage by replacing compromised tubing before leaks worsen.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect hose fittings and clamps; replace clamps if corroded or loose to ensure a watertight seal.
• Avoid sharp bends or kinks when routing the hose; trim only per OEM guidance if necessary.