Ddt595s Parts

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This third rack tray is a replacement insert that fits the dishwasher's third rack to secure silverware and small items for more consistent cleaning. Restores proper utensil placement when the original tray is cracked, warped, or missing. What it does:

• Provides a dedicated tray to keep silverware and small items from falling through or shifting during the wash cycle.
• Helps prevent small items from blocking spray arms or falling into lower racks, improving wash coverage.
• Restores the intended loading configuration of the third rack after damage or loss.
• Addresses symptoms such as utensils dropping into lower racks or items shifting during cycles.

• Remove dishes and utensils from the third rack before installing the tray.
• Typically installs by aligning tabs/hooks and sliding the tray into the third-rack slots; special tools usually are not required.
• Inspect rack wires and mounting clips for damage before installation—bent or broken rack components can affect fit.
• Refer to the appliance owner's manual or service guide for model-specific installation guidance and safety information.

This rear third-rack end cap replaces the plastic end piece that secures the dishwasher's third rack to its track, restoring proper alignment and smooth sliding. Ideal for replacing cracked, broken, or missing rear end caps. What it does:

• Secures the third rack to the rear track so the rack stays aligned during use
• Provides a smooth contact point for the rack to slide on and reduces binding or catching
• Replaces cracked, broken or missing rear end caps that can cause rack drift or instability
• Common symptoms this part can fix: rack falls off track, rear rack sits unevenly, scraping or rough movement when sliding the rack

• Disconnect power to the dishwasher before beginning repairs for safety
• Pull the third rack out to access the end cap; remove the old cap and snap the replacement into place
• No special tools are typically required; a flat screwdriver can help if the old cap is stuck
• After installation, slide the rack in and out a few times to ensure secure fit and smooth movement

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This console cover graphic assembly replaces the worn or damaged control panel overlay so button labels and settings are readable and the console looks factory-fresh. It installs over the appliance console to restore appearance and user clarity. What it does:

• Provides a labeled graphic overlay for the appliance console so controls and settings are easy to read
• Restores the original appearance of a faded, scratched, or peeled console face
• Helps prevent further wear to the underlying control surface by covering it
• Addresses symptoms such as faded labels, peeling decal, or cosmetic damage to the console area

• Disconnect power to the appliance before starting any work to avoid electrical hazard
• Installation typically requires removing the console trim or screws and carefully aligning the graphic before securing
• Handle with care to avoid creases or damage to the graphic; use appropriate adhesive or fasteners as originally supplied

This right-side door trim is a factory-style replacement that restores the finished edge and appearance of the appliance door. It covers the door edge and trim mounting area for a clean, factory look. What it does

• Replaces cracked, chipped or worn right-side door trim to restore appearance
• Covers and protects the door edge and trim fasteners from dirt and damage
• Helps maintain the door's finished look after impacts or wear
• Fits into existing trim mounting points for a direct replacement

• High-level replacement only; follow for disassembly steps
• Remove any contents from the door and move shelves as needed for clearance
• Use proper tools to remove fasteners or trim clips; avoid forcing the trim to prevent damage

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This console bezel and cover assembly replaces a cracked or damaged front console bezel to restore the control area's appearance and protect switches and displays. It provides a finished bezel that secures the control components and keeps them safe from everyday wear. What it does:

• Covers and protects the console controls, buttons, and display from moisture, dirt, and impact
• Restores a secure mounting surface for switches and control hardware
• Eliminates rattles or looseness caused by a broken or warped bezel
• Improves the appliance's appearance by replacing scratched or cracked front trim

• One bezel and cover console assembly

• Disconnect power to the appliance before any disassembly to avoid shock or injury
• Access typically requires removing a few screws or clips from the control panel; keep hardware organized for reassembly
• Handle with care to avoid cracking the new bezel; plastic trim can be fragile at mounting points

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This left-side door trim piece restores the exterior appearance and proper fit of a damaged or worn appliance door. It replaces cracked, chipped, or loose trim to help the door close and sit correctly in the frame. What it does:

• Covers and protects the left edge of the door while providing a finished appearance
• Replaces cracked, broken, or cosmetically damaged trim
• Helps maintain correct alignment of the door edge and attachment points
• Secures to the door with factory mounting tabs or screws
• Useful when left-side trim has snapped, warped, or come loose

• One left side door trim

• Disconnect power and/or fuel supply before beginning any repair
• Use appropriate hand tools; support the door to prevent dropping or damage
• Inspect mounting tabs and nearby components; replace any broken fasteners
• Follow the appliance service manual for disassembly and torque/spec guidance