Ddt595s Parts

This tub-mount sleeve is a replacement mounting sleeve that helps secure the washer tub and reduce wear where the tub attaches to the cabinet. Restores proper alignment and helps prevent rubbing or noise from a worn mount area. What it does:

• Provides a durable bearing surface where the tub mounts to the washer cabinet
• Helps keep the tub properly centered to reduce rubbing, vibration, and related noise
• Replaces worn or damaged sleeve surfaces that can cause tub movement or abrasion
• Commonly used when tub mounting points show visible wear or the tub shifts during cycles

• One tub-mount sleeve

• Turn off and unplug the appliance and shut off the water supply before beginning any repair
• Inspect surrounding mounts, seals, and fasteners; replace any additional damaged components as needed
• Use appropriate tools and follow OEM disassembly steps to access and press or slide the sleeve into place

The Upper Rack Bracket Assembly is an OEM replacement part for GE dishwashers. It is located inside the dishwasher tub and functions to securely mount the upper dish rack. It allows for adjustable height positioning and prevents rack movement during washing.

Causes of a bad upper rack bracket assembly can include cracks or breaks in the mounting points, stripped screw holes allowing rack sway, or deformities preventing proper seating.

Symptoms of a bad upper rack bracket assembly include: 

• Loosening or detaching of the upper rack during the cycle  
• Restricted rack adjustment or inability to set desired height
• Noise or vibration from an unsecured rack vibrating against the tub

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This tub-mount gasket seals and cushions the washer tub where it mounts to the cabinet, helping prevent leaks and reducing vibration for quieter operation. It restores a proper seal to keep water contained inside the washer tub. What it does

• Creates a water-tight seal at the tub mounting point to help stop leaks.
• Cushions the tub and reduces noise and vibration during spin cycles.
• Helps maintain proper alignment between the tub and cabinet.
• Use when you see water pooling near the base, leaks from the tub area, or increased vibration/noise.

• Disconnect power and water supply before starting any repair.
• Drain the washer and remove panels as required for access.
• Inspect the mounting surface for damage or debris; clean before installing the new gasket for a proper seal.
• After installation, run a short cycle to check for leaks and proper operation.

This upper rack replaces the removable top dish rack so you can safely load and secure glasses, cups and small items for proper washing. Restores stable support and smooth sliding for the dishwasher's upper loading area. What it does:

• Holds and supports glasses, cups, mugs and small dishes during wash cycles
• Replaces bent, rusted or broken upper rack wires that can snag dishware
• Restores proper alignment and engagement with upper rack rollers and rails
• Helps improve washer performance when top-rack items are loose or tipping

• Disconnect power and water to the appliance before beginning repairs
• Remove lower and existing upper racks per your model's instructions to access mounting points
• Inspect rollers, rails and clips for wear; replace separately if damaged
• Use care handling the rack to avoid sharp wire ends; wear gloves if needed

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force

This tub top trim replaces the decorative/top trim that surrounds the washer tub opening to restore a finished look and help keep the inner tub sealed from the cabinet. It's a direct-fit exterior trim piece for top-load washers. What it does

• Replaces damaged, cracked, or warped tub top trim that lets water spray toward the cabinet
• Restores the washer's finished appearance around the tub opening
• Helps keep the tub's edge covered to reduce splash and debris entry
• Useful when the original trim is loose, bent, or cosmetically worn

• One tub top trim piece as shown

• Turn off power and water to the washer before beginning any service
• May require removing the cabinet or control console depending on model; follow the OEM service instructions
• Use proper fasteners and gaskets from the OEM parts list if required; only install what is included

This button and graphic assembly replaces a worn or damaged control panel button and its overlay graphic to restore clear tactile feedback and readable markings for cycle selection and settings. It fits into the appliance's console for direct user control. What it does:

• Replaces a damaged or faded control panel button and the printed graphic overlay
• Restores readable labels for accurate selection of cycles and options
• Helps resolve issues where a button is loose, missing, or visually worn
• Works with the console's existing switch contacts to transmit user commands

• One button and graphic assembly as shown

• Remove power to the appliance before attempting any service
• Installation typically requires removing the console trim to access the button assembly
• Handle the graphic overlay carefully to avoid creasing or smudging printed markings
• If you encounter damaged mounting clips or internal switches, replace those parts as needed