Ddt595ssjss Parts

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This tub-mount gasket seals and cushions the washer tub where it mounts to the cabinet, helping prevent leaks and reducing vibration for quieter operation. It restores a proper seal to keep water contained inside the washer tub. What it does

• Creates a water-tight seal at the tub mounting point to help stop leaks.
• Cushions the tub and reduces noise and vibration during spin cycles.
• Helps maintain proper alignment between the tub and cabinet.
• Use when you see water pooling near the base, leaks from the tub area, or increased vibration/noise.

• Disconnect power and water supply before starting any repair.
• Drain the washer and remove panels as required for access.
• Inspect the mounting surface for damage or debris; clean before installing the new gasket for a proper seal.
• After installation, run a short cycle to check for leaks and proper operation.

This third rack tray is a replacement insert that fits the dishwasher's third rack to secure silverware and small items for more consistent cleaning. Restores proper utensil placement when the original tray is cracked, warped, or missing. What it does:

• Provides a dedicated tray to keep silverware and small items from falling through or shifting during the wash cycle.
• Helps prevent small items from blocking spray arms or falling into lower racks, improving wash coverage.
• Restores the intended loading configuration of the third rack after damage or loss.
• Addresses symptoms such as utensils dropping into lower racks or items shifting during cycles.

• Remove dishes and utensils from the third rack before installing the tray.
• Typically installs by aligning tabs/hooks and sliding the tray into the third-rack slots; special tools usually are not required.
• Inspect rack wires and mounting clips for damage before installation—bent or broken rack components can affect fit.
• Refer to the appliance owner's manual or service guide for model-specific installation guidance and safety information.

This upper rack replaces the removable top dish rack so you can safely load and secure glasses, cups and small items for proper washing. Restores stable support and smooth sliding for the dishwasher's upper loading area. What it does:

• Holds and supports glasses, cups, mugs and small dishes during wash cycles
• Replaces bent, rusted or broken upper rack wires that can snag dishware
• Restores proper alignment and engagement with upper rack rollers and rails
• Helps improve washer performance when top-rack items are loose or tipping

• Disconnect power and water to the appliance before beginning repairs
• Remove lower and existing upper racks per your model's instructions to access mounting points
• Inspect rollers, rails and clips for wear; replace separately if damaged
• Use care handling the rack to avoid sharp wire ends; wear gloves if needed

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

A replacement rack cover handle for the dishwasher upper rack that restores a secure grip and smooth rack operation. Replaces a cracked, broken or missing handle so you can load and unload dishes more easily. What it does

• Attaches to the front of the upper rack to provide a handle for pulling the rack in and out.
• Restores proper alignment and prevents the rack cover from snagging when loading dishes.
• Replaces a handle that is cracked, loose, or broken and reduces the risk of cuts from sharp plastic edges.
• Helps maintain normal rack movement and prevents accidental rack drops.

• One rack cover handle.

• Disconnect power to the dishwasher before servicing to avoid electrical hazard.
• Empty the rack and remove any clips or stops as needed to access the handle mounting points.
• Requires basic hand tools (screwdriver or nut driver) to remove and install fasteners; keep track of any small clips or screws.
• Test rack movement after installation and do not overtighten fasteners to avoid cracking the replacement part.

Includes 12 screws.

This tub mount gasket provides a flexible seal between the washer tub and mounting surface to help prevent water leaks and reduce vibration. Replaces a worn or torn tub mount to restore a tighter, more reliable seal. What it does

• Seals the tub mounting area to help keep water contained during wash cycles
• Cushions and stabilizes the tub to minimize vibration and noise
• Prevents gaps caused by hardened, cracked, or compressed original gasket
• Helps stop visible leaks at the tub mounting interface

• One tub mount gasket

• Basic removal of the old gasket and cleaning of the mating surfaces is recommended before installing the new gasket
• Use caution working around sharp edges and wear gloves to protect hands
• Do not operate the appliance if the gasket is not seated correctly

Contains one lower spray arm and one middle spray arm.