De107 Maytag Parts

Best Seller

Genuine Whirlpool part

Dryer Door Latch Kit

By: Whirlpool

Part Number: 306436

The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.

Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.

Symptoms of a bad dryer door latch include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly during a cycle
Difficulty in closing or latching the door
Loose or misaligned latch components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Matrag dryer making loud squealing noise that changes constantly! Dwain A. • Mayfield , KY • June 05, 2015

Knowing that several things could be causing the noise, I ordered parts to cover all possibilities; once I got inside the dryer, I found the Idler Arm and Idler Pulley were worn and loose; replaced them and the Tumbler Bearings; the dryer now runs quiet again. Was going to replace the Drive Belt but believe it to be the wrong model, it was narrower and had 4 ribs whereas the old one seems to be OK and I believe has 5 ribs. The Drum Rollers and Shafts were OK Also replaced the Door Latch. Read more

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

Genuine Whirlpool part

Spring-Timer Knob (Timer Control Knob)

By: Whirlpool

Part Number: WP211065

This spring-timer knob replaces a worn, cracked or missing timer knob so you can set and adjust the appliance's mechanical timer reliably. Simple, direct replacement that restores the user control interface. What it does:

Fits onto the appliance's mechanical timer shaft to allow setting and advancing the timer
Restores a secure grip and pointer for accurate time selection
Commonly used to fix loose, cracked, stripped, or missing timer knobs
Helps resolve inability to turn or set the mechanical timer caused by a damaged knob

What's included: Includes: one spring-timer knob Install notes:

Disconnect power to the appliance before starting any repair
Pull the old knob straight off the timer shaft; align splines and press the new knob fully onto the shaft until seated
If the knob is tight, use a proper knob puller or gentle, even leverage to avoid damaging the shaft

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP1163839

Specs: 10 - 16 x .375

Do-It-Yourself Stories from Customers like You Leaked water during tub fill James M. • Hampton , VA • May 15, 2017

Replaced the Injector valve, nozzle and sleeve-in using new hose clamps Read more

Genuine Whirlpool part

Leveling Feet (Adjustable)

5.0 (1)

By: Whirlpool

Part Number: W10176519

Adjustable leveling feet that restore stability and balance to your appliance by letting you fine-tune height at each corner for a flat, wobble-free install—helps reduce vibration and improve door fit and operation. What it does:

Provides adjustable height to level an appliance on uneven floors.
Eliminates rocking or wobbling that can cause vibration, noise or movement during operation.
Helps ensure doors and panels sit flush and seal properly.
Durable replacement designed for direct fit where the OEM leveling foot is specified.

What's included: One replacement leveling foot. Install notes:

Disconnect power and water before performing any work.
Support the appliance so it cannot tip—use a jack or have a helper hold it while you adjust feet.
Turn the foot to raise or lower the corner; use hand tools as needed and avoid excessive force.
After adjusting, check stability and run a short cycle to ensure vibration and alignment are resolved.

Do-It-Yourself Stories from Customers like You The siphon break got broken during our move Barb H. • Castle Rock , CO • April 15, 2017

I have a Maytag washer that is over 30 years old and still runs like a top. When the siphon break got destroyed in our move, I was able to find a replacement kit that fixed our problem. I found a video on UTube that showed us just what to do. I'm delighted I didn't have to buy a new washer since the quality of new ones doesn't hold a candle to the quality of my Maytag. Read more

Genuine Whirlpool part

Washer

5.0 (1)

By: Whirlpool

Part Number: WP314158

This small hardware washer serves as a spacer/bearing surface within appliance assemblies to distribute load and maintain proper clearance. Replacing a worn washer helps restore smooth operation and alignment of the affected control or mechanism. What it does:

Distributes fastener load and protects mating surfaces
Maintains correct spacing to prevent rubbing or binding
Provides a smooth bearing surface to reduce friction and noise
Common symptoms when worn or missing: looseness, scraping sounds, difficult or rough turning, misalignment

What's included:

1 washer

Install notes:

Disconnect power; shut off gas or water if applicable
Note the stack order and orientation before removal
Inspect the mating fastener/shaft for wear and replace related parts if damaged
Reassemble and tighten fasteners snugly—do not overtighten—then test for smooth operation

Do-It-Yourself Stories from Customers like You Dryer paddle fell off due to stripped screws Morgan D. • Woodinville , WA • July 29, 2021

This was my first ever self appliance repair. The videos provided by Appliance Parts Pros were excellent and gave me the confidence to do the work myself. My Maytag dryer model opened differently than the one in the videos. I had to remove the front panel and screwing in the paddle required reaching way back and working in a small space where I couldn't see what I was doing. It was uncomfortable but doable with a nut driver and a bit of elbow grease. The part fit perfectly and it looks good as... Read more

Genuine Whirlpool part

Screw, 1 Piece

5.0 (3)

By: Whirlpool

Part Number: WPY310759

This replacement screw fastens appliance panels, brackets, and components. Use it to replace missing, stripped, or rusted hardware to restore a secure fit and help reduce vibration or rattling during operation.

Secures panels, brackets, and internal components to the cabinet or frame
Helps prevent vibration, rattling, and misalignment from loose hardware
Replaces a missing, rusted, or stripped original screw
Matches the original fastener style for proper fit in specified locations

What's included: Includes one screw. Install notes:

Disconnect power; shut off gas and water supplies before servicing
Use the correct screwdriver or nut driver and match length/thread to the original
Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic or thin metal

Do-It-Yourself Stories from Customers like You Timer out on washer; baffle missing on dryer Debbie S. • Converse , TX • June 10, 2017

Purchased timer and baffle, and my appliance repairman installed them. I could get the parts cheaper than he could from his supplier; he asked me for the Appliance Parts Pros website address! Read more

Genuine Whirlpool part

Block, Terminal

5.0 (1)

By: Whirlpool

Part Number: 400008

Do-It-Yourself Stories from Customers like You The 220 volt cable was installed without the proper grommet the sharp edge of the dryer housing wore thru the insulation of the cable and almost caused a fire Rainer R. • Osceola , WI • December 13, 2016

I had to replace the terminal block due to the 220 volt ark. A small fire at the bottom of the dryer caused the belt to partially burn. I had to replace it along with the 220 volt dryer cable. If the local hardware store would have taken the time to install the dryer with an additional 0.50 cent grommet, this could have been avoided. Thank you for sending the correct parts. This was the second time I had to use your service and I will continue to use it in the future. Read more

Genuine Whirlpool part

Screw And Fastener Kit

By: Whirlpool

Part Number: 204439

Screw kit for front panel.

Genuine Whirlpool part

Screw & Fastener Assy

By: Whirlpool

Part Number: 204445

Genuine Whirlpool part

Seal, Front Rubber

4.0 (1)

By: Whirlpool

Part Number: 314286

Do-It-Yourself Stories from Customers like You Making loud squealing sound when dryer was turned on Michael M. • Plainfield , IL • November 19, 2018

Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more

Genuine Whirlpool part

Door Hinge

By: Whirlpool

Part Number: W11230112

Genuine Whirlpool part

Timer

4.0 (1)

By: Whirlpool

Part Number: WP33302454

Do-It-Yourself Stories from Customers like You Dryer kept on running it had to be shut off manually clock was not working Brian O. • Mattoon , WI • October 12, 2014

Replaced the old timer with a new one. Read more

Genuine Whirlpool part

Pulley- Mo

4.7 (6)

By: Whirlpool

Part Number: WP6-3051850

Do-It-Yourself Stories from Customers like You Motor failure noisy squealing bearing followed by failure to run buzzing noise when start pressed Kurt K. • La Center , WA • September 19, 2014

This was a Maytag DE312 actually a Whirlpool labeled as Maytag) and is 27 years old. Replaced motor, drive belt and drum rollers. One tricky part was the motor because the new motor comes with integral starter and it was necessary to cut off existing female spade connectors on some wires and crimp on new connectors. Instructions were adequate but need to be carefully followed and a decent electrical stripping and crimping tool must be at hand. I bought a new motor drive pulley because another... Read more