De5fhaxss02 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Dryer Door Latch Kit

4.9 (35)

By: Whirlpool

Part Number: 306436

The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.

Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.

Symptoms of a bad dryer door latch include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly during a cycle
Difficulty in closing or latching the door
Loose or misaligned latch components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Female part of drier door latch broke Randy E. • Port Republic , VA • August 30, 2014

Took off front cover of drier, removed old part and just snapped in new part. Read more

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

Genuine Whirlpool part

Switch- Pu

4.7 (3)

By: Whirlpool

Part Number: WP306533

Do-It-Yourself Stories from Customers like You Borken dryer drum belt and broken start swtich Robert H. • Delanson , NY • December 23, 2014

Replaced belt and switch. Be sure to follow the directions for the belt instillation and be sure that the belt runs on the outside diameter of the drum and not in the groove. BE SURE TO UNPLUG THE POWER CORD! Read more

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP1163839

Specs: 10 - 16 x .375

Do-It-Yourself Stories from Customers like You Leaked water during tub fill James M. • Hampton , VA • May 15, 2017

Replaced the Injector valve, nozzle and sleeve-in using new hose clamps Read more

Genuine Whirlpool part

Leveling Feet (Adjustable)

5.0 (1)

By: Whirlpool

Part Number: W10176519

Adjustable leveling feet that restore stability and balance to your appliance by letting you fine-tune height at each corner for a flat, wobble-free install—helps reduce vibration and improve door fit and operation. What it does:

Provides adjustable height to level an appliance on uneven floors.
Eliminates rocking or wobbling that can cause vibration, noise or movement during operation.
Helps ensure doors and panels sit flush and seal properly.
Durable replacement designed for direct fit where the OEM leveling foot is specified.

What's included: One replacement leveling foot. Install notes:

Disconnect power and water before performing any work.
Support the appliance so it cannot tip—use a jack or have a helper hold it while you adjust feet.
Turn the foot to raise or lower the corner; use hand tools as needed and avoid excessive force.
After adjusting, check stability and run a short cycle to ensure vibration and alignment are resolved.

Do-It-Yourself Stories from Customers like You The siphon break got broken during our move Barb H. • Castle Rock , CO • April 15, 2017

I have a Maytag washer that is over 30 years old and still runs like a top. When the siphon break got destroyed in our move, I was able to find a replacement kit that fixed our problem. I found a video on UTube that showed us just what to do. I'm delighted I didn't have to buy a new washer since the quality of new ones doesn't hold a candle to the quality of my Maytag. Read more

Genuine Whirlpool part

Washer

5.0 (1)

By: Whirlpool

Part Number: WP314158

This small hardware washer serves as a spacer/bearing surface within appliance assemblies to distribute load and maintain proper clearance. Replacing a worn washer helps restore smooth operation and alignment of the affected control or mechanism. What it does:

Distributes fastener load and protects mating surfaces
Maintains correct spacing to prevent rubbing or binding
Provides a smooth bearing surface to reduce friction and noise
Common symptoms when worn or missing: looseness, scraping sounds, difficult or rough turning, misalignment

What's included:

1 washer

Install notes:

Disconnect power; shut off gas or water if applicable
Note the stack order and orientation before removal
Inspect the mating fastener/shaft for wear and replace related parts if damaged
Reassemble and tighten fasteners snugly—do not overtighten—then test for smooth operation

Do-It-Yourself Stories from Customers like You Dryer paddle fell off due to stripped screws Morgan D. • Woodinville , WA • July 29, 2021

This was my first ever self appliance repair. The videos provided by Appliance Parts Pros were excellent and gave me the confidence to do the work myself. My Maytag dryer model opened differently than the one in the videos. I had to remove the front panel and screwing in the paddle required reaching way back and working in a small space where I couldn't see what I was doing. It was uncomfortable but doable with a nut driver and a bit of elbow grease. The part fit perfectly and it looks good as... Read more

Genuine Whirlpool part

Drive Belt

4.8 (6)

By: Whirlpool

Part Number: WPY311012

Do-It-Yourself Stories from Customers like You The heating element was burned out and the belts were frayed John S. • Cordova , AK • December 03, 2017

The belts were very easy to change through the back of the machine. The heating element was a bit more involved. I basically had to disassemble the entire machine. The heating element is located on the front panel of the machine surrounding the door. You have to remove the rear panel, the top panel and loosen both side panels from the bottom pan, 6 screws. Then you slide the 2 sides and front panel (all still attached) a few inches forward so that you can access the screws that secure the side... Read more

Genuine Whirlpool part

Screw, 1 Piece

5.0 (3)

By: Whirlpool

Part Number: WPY310759

This replacement screw fastens appliance panels, brackets, and components. Use it to replace missing, stripped, or rusted hardware to restore a secure fit and help reduce vibration or rattling during operation.

Secures panels, brackets, and internal components to the cabinet or frame
Helps prevent vibration, rattling, and misalignment from loose hardware
Replaces a missing, rusted, or stripped original screw
Matches the original fastener style for proper fit in specified locations

What's included: Includes one screw. Install notes:

Disconnect power; shut off gas and water supplies before servicing
Use the correct screwdriver or nut driver and match length/thread to the original
Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic or thin metal

Do-It-Yourself Stories from Customers like You Timer out on washer; baffle missing on dryer Debbie S. • Converse , TX • June 10, 2017

Purchased timer and baffle, and my appliance repairman installed them. I could get the parts cheaper than he could from his supplier; he asked me for the Appliance Parts Pros website address! Read more

Genuine Whirlpool part

Block, Terminal

5.0 (1)

By: Whirlpool

Part Number: 400008

Do-It-Yourself Stories from Customers like You The 220 volt cable was installed without the proper grommet the sharp edge of the dryer housing wore thru the insulation of the cable and almost caused a fire Rainer R. • Osceola , WI • December 13, 2016

I had to replace the terminal block due to the 220 volt ark. A small fire at the bottom of the dryer caused the belt to partially burn. I had to replace it along with the 220 volt dryer cable. If the local hardware store would have taken the time to install the dryer with an additional 0.50 cent grommet, this could have been avoided. Thank you for sending the correct parts. This was the second time I had to use your service and I will continue to use it in the future. Read more

Genuine Whirlpool part

Nut, Mounting

4.5 (2)

By: Whirlpool

Part Number: WP422617

Do-It-Yourself Stories from Customers like You Broken fan switch part # no longer available. Joseph H. • Argyle , TX • May 31, 2020

Be careful not to tighten or twist the small hex nut in the knob cylinder/housing with force. there is a very small plastic set tab that can be broken off easily. how do I know? The orientation of the switch "box" is horizontal instead of vertical. otherwise, this replacement part # works as expected. I couldn't get the switch to attach plate removed, and the switch removed, without removing the entire cooktop and removing the top glass burner cover. Not difficult, but time-consuming. Read more

Genuine Frigidaire part

Seal

4.9 (7)

By: Frigidaire

Part Number: 5303281049

Do-It-Yourself Stories from Customers like You Our clothing had scorch marks on them occasionally Judy M. • Columbiaville , MI • March 24, 2017

The nylon slides on the front felt seal were worn out, allowing the drum to sag in the front. This is where our clothing would get caught and scorch. I replaced the felt, rear bearing kit and while I was that far, I replaced the belt as it's very inexpensive. All done for less than 10% of a new dryer purchase. Read more

Genuine Frigidaire part

Timer

5.0 (1)

By: Frigidaire

Part Number: 131062800

Do-It-Yourself Stories from Customers like You My dryer needed a replacement belt rear bearing timer front seal and felt guide Joseph V. • Bergen , NY • November 08, 2016

I replaced the parts as shown in the helpful videos on the appliancepartspro.com website. The installation was relatively simple and did not take much time to install the parts. Read more

Genuine Frigidaire part

Washer Wiring Harness Clip

By: Frigidaire

Part Number: 131063700

Secures wiring harness to prevent chafing and maintain safe wire routing in washers, dryers, and laundry appliances. Replace if loose or broken. Check your model for compatibility.

Genuine Frigidaire part

Handle - Door

By: Frigidaire

Part Number: 131192302

Genuine Frigidaire part

Lint Screen

By: Frigidaire

Part Number: 131390300

By Frigidaire. Screen - 12-1/4" wide. Mounting frame included - 12-3/4" between mounting holes.

Genuine Frigidaire part

Dryer Leveling Leg

5.0 (1)

By: Frigidaire

Part Number: 131527400

This adjustable leveling leg supports your dryer and allows you to level the appliance on uneven floors. It screws into the dryer's base and can be raised or lowered to eliminate rocking or vibration. Replace it when the leg is bent, stripped, or won't adjust properly, causing your dryer to be unstable or noisy.

Do-It-Yourself Stories from Customers like You Needed new feet for dryer had been used as stacked unit for 15 yrs & washer gave out dryer still good but couldn't find the feet that were taken off Eleanore B. • Winter Park , FL • February 02, 2016

Ordered new feet that fit unit. Read more

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

De5fhaxss02 Parts

Dryer Door Latch Kit

Rubber Foot

Switch- Pu

Screw

Leveling Feet (Adjustable)

Washer

Drive Belt

Screw, 1 Piece

Block, Terminal

Nut, Mounting

Seal

Timer

Washer Wiring Harness Clip

Handle - Door

Lint Screen

Dryer Leveling Leg