Dfe28jksjss Parts

This pad mastic is an adhesive sealant used to secure foam pads and insulation inside the appliance, helping keep components in place and reducing vibration and air gaps for more consistent performance. What it does:

• Bonds foam pads, insulation and other non-structural components to appliance cabinet surfaces
• Helps reduce vibration and noise by holding pads firmly in place
• Seals small gaps to limit air movement and moisture around insulation
• Commonly used during panel, liner, or insulation repairs and reassembly

• Unplug the appliance or shut off power before starting any repair
• Clean and dry mounting surfaces; remove old adhesive and debris for best adhesion
• Press pad into place and hold as needed; allow adhesive to set per OEM recommendations
• Wear gloves and avoid skin/eye contact; ventilate area when working with adhesives

This is a stainless steel door handle designed for the freezer compartment of a refrigerator. It mounts to the exterior of the freezer door and provides a grip for opening and closing the door. Replace this handle if it is loose, cracked, broken, or if the mounting points have become stripped and the handle no longer stays securely attached.

Water dispenser won't fill containers automatically? This autofill paddle and switch activates hands-free filling. Simple DIY fix for convenient operation.

Water pooling under your refrigerator? This drip tray collects defrost and condensation water, keeping your cabinet floor dry. Direct fit replacement.

This is a stainless-finish touch control panel for the refrigerator's water and ice dispenser area. It serves as the user interface for selecting water, ice, and other dispenser functions. Replace this touchpad if the buttons are unresponsive, intermittently working, or if the display is blank or flickering.

Fix water pooling or ice buildup in your fridge with a new defrost drain tube. Channels condensation from evaporator to drain pan. Simple install.

Case back tube for bottom-mount refrigerators. Installs behind the refrigerator case. Replace if cracked, damaged, or leaking to restore proper function.

Seals the refrigerator door to keep cold air in and prevent condensation. Replace if torn, cracked, or no longer forming a tight seal. Verify fit.

If your icemaker isn't making ice or is leaking water, the fill cup may be cracked or misaligned. This part directs water into the icemaker mold for proper ice production.

If your icemaker has inconsistent ice production or the fill tube keeps freezing, this heater prevents ice buildup. Moderately easy DIY replacement.

This is a small plastic striker that activates the door light switch when the refrigerator door is closed. It presses against the light switch mechanism to turn the interior light off when the door shuts. Replace this part if your refrigerator light stays on constantly or fails to turn off when the door is closed, which can cause excess heat buildup and higher energy usage.

The refrigerator freezer door handle assembly is the handle attached to the freezer compartment door that you grip to open and close it. It is typically made of plastic or metal and attaches to the door via mounting screws or clips. Replace it if the handle is cracked, broken, or has pulled away from the door, making it difficult or uncomfortable to open the freezer.

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

The Evaporator Cover is an OEM replacement part for GE refrigerators. It is responsible for covering and protecting the evaporator coils located inside the refrigerator or freezer compartment.

A bad evaporator cover can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as frost buildup, inconsistent cooling, or excessive noise, it may indicate a need to replace the evaporator cover.

Symptoms of a bad evaporator cover include:

• Frost accumulation on the coils
• Uneven cooling or inconsistent temperature
• Excessive noise or vibration during operation

Restore your refrigerator by replacing the faulty evaporator cover with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Lower freezer drawer slide enables smooth gliding access to your freezer compartment. Replace if drawer sticks, wobbles, or doesn't glide properly. Confirm fit with your model number before ordering.