Dlgx7601 Parts

A small mounting bracket that secures and supports internal appliance components to keep shelves, drawers or assemblies aligned and stable. Replaces a cracked, broken or missing supporter to restore proper fit and reduce movement. What it does

• Secures an internal component or assembly in place to prevent sagging or misalignment
• Stops rattling, wobble or looseness caused by a damaged or missing bracket
• Restores correct clearance and support for the associated shelf/drawer/assembly
• Helps maintain normal operation and prevents further wear on adjacent parts

• One supporter holder bracket

• Disconnect power before starting repairs; unplug or flip the appliance breaker
• Remove nearby shelves, drawers or panels to access the damaged bracket
• Inspect mating parts for damage and replace any worn fasteners as needed
• Use basic hand tools;

This inlet hose routes household water into the appliance so it can fill and operate correctly. Replacing a damaged inlet hose restores proper water flow and prevents leaks that can cause poor performance or water damage. What it does:

• Channels incoming water from the household supply into the appliance
• Stops leaks and restores normal fill when the original hose is cracked, split, or worn
• Helps correct symptoms like no water entering the appliance, slow or intermittent fill, or visible leaking at the hose connection
• Works with the appliance's valve and fittings to maintain a sealed water path

• Turn off the water supply and unplug the appliance before starting any work
• Inspect fittings and seals; replace any worn gaskets to ensure a watertight connection
• Hand-tighten connections then check for leaks; avoid overtightening plastic fittings

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

The High Limit Thermostat Kit is an OEM part for LG dryers. It acts as a safety device that prevents the dryer from overheating by cutting off power to the heating element if the dryer exceeds a certain temperature.

Common causes of a faulty thermostat include regular wear and tear, electrical issues, or a malfunction in the heating system that causes the thermostat to overwork.

Symptoms of a bad High Limit Thermostat include:

• Dryer not heating at all
• Dryer overheating or shutting off unexpectedly
• Clothes taking longer to dry
• The dryer being unusually hot to the touch

This OEM LG part is also compatible with Sears/Kenmore models.

Includes High limit and safety thermostats.

The Dryer Top Panel Assembly is an OEM component specifically designed for LG dryers. This top panel is responsible for covering the top of the dryer and protecting internal components. 

Causes of a bad top panel can include cracks, dents, or warping of the plastic over time from repeated use and heat exposure. The coated surface can also show signs of wear like scratches, scuffs, or peeling/flaking of the finish.

Symptoms of a bad top panel include:

• drafts or air leaks around the top of the dryer 
• loose, wobbly, or misaligned panel
• exposed internal components
• diminished aesthetic appearance

This OEM LG part is also compatible with select Sears/Kenmore models.

This inlet hose delivers water from the household supply to the appliance for normal fill cycles. It restores proper water flow when the original inlet hose is damaged, cracked, or leaking. What it does:

• Channels incoming water from the household supply to the appliance's fill valve
• Replaces a worn, cracked, or leaking inlet hose to stop external leaks
• Helps restore normal fill and wash cycles affected by restricted or damaged hoses
• Fits as a direct replacement for the corresponding OEM inlet connection

• One inlet hose

• Disconnect power and shut off the water supply before starting any work
• Inspect fittings and replace any damaged clamps or seals to ensure a watertight connection
• Hand-tighten connections, then snug with a wrench—avoid over-tightening which can damage fittings
• Test for leaks by running a short fill cycle and checking all connections

The Generator Assembly is an OEM part for LG electric dryers. This crucial assembly houses the heating element that supplies warmth to dry clothes. 

Symptoms of a bad generator assembly include:

• Inability to achieve proper drying temperatures
• Drying cycle taking excessively long times   
• Insufficient or incomplete drying of clothes loads
• Odor or smoke emanating from dryer interior

Causes of failure can be cracks in insulating materials allowing electricity leaks, broken or corroded terminal connections, or general carbon buildup over years of use.

Replace yours today with this genuine OEM LG assembly to restore fast and efficient drying performance. New heating elements help eliminate safety concerns. This replacement part is compatible with some Samsung, GE, and Kenmore dryer models.

This front panel assembly houses the washer/dryer control surface and provides a finished interface for operating the appliance. It restores the unit's control area and protects internal electronics from dust and moisture. What it does:

• Replaces the exterior control panel and bezel so buttons, touchpads, or display elements are properly mounted.
• Provides the user interface for selecting cycles, options, and starting the machine.
• Protects internal control boards and wiring from everyday exposure to dust and moisture.
• Can resolve symptoms such as unresponsive buttons, loose or cracked bezel, or a damaged/control-area cosmetic appearance.

• Disconnect power before beginning any repair to avoid shock or injury.
• Handle the panel carefully to avoid damaging attached button membranes, touchpads, or display lenses.
• Some models require removal of trim, console fasteners, or the top cover to access mounting screws.
• If electrical connectors attach to the panel, disconnect and reconnect them securely; test function before final reassembly.

This frame bracket secures and supports appliance panels and structural components to restore proper alignment and reduce movement. It's a direct-fit replacement that helps stop panel rattling and keeps connected parts stable during operation. What it does:

• Secures the appliance frame or panel to the cabinet to maintain proper alignment.
• Provides structural support to prevent flexing or sagging of connected components.
• Reduces rattling, vibration, and noise caused by a loose or broken bracket.
• Common symptom: visible looseness, misaligned panel or persistent vibration during use.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the OEM service manual or exploded parts diagram for correct placement and fastener locations.
• Typical installation requires basic hand tools; inspect surrounding mounting points and hardware and replace if worn.
• If the bracket is plastic, avoid overtightening screws to prevent cracking.