Dprs483ea0ww Parts

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This hub cap is manufactured by Husqvarna and comes in glossy black color. The main function of a hub cap is to provide a protective barrier or cover for the wheel hub and lug nuts against dirt, grime, and other harmful elements. Wheels that do not have hub caps are more susceptible to damage. Corrosion or rust on the lug nuts is common for wheels free of hubcaps. This results in harder lug nut removal. Over time, rust can spread and damage the hub. With hub caps installed, costly repairs and replacements are no longer a concern. Installing a hub cap will take less than five minutes. A rubber ballet can be used to push the hub cap to the wheel hub. To install this genuine front hub cap, simply push it down or use a rubber mallet. When protecting the hub and axle of a lawnmower, this Husqvarna 532104757 Front Axle Hub Cap OEM replacement is an option. It is an OEM front axle hub cap compatible with most Husqvarna Weed Eater, Poulan and Craftsman tractor and mower models. This front axle hub cap is sold individually.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This grease fitting is a genuine Husqvarna part, sold individually. This grease fitting can be used as a replacement part in a lawn mower. The purpose of a grease fitting in a lawn mower is to allow the lubrication of one or more components within the internal machinery of the lawn mower while regulating the amount of lubricant and ensuring that no overflowing or leaking occurs.The grease fitting in a lawn mower might need to be replaced if the grease fitting fails to prevent leakages or overflowing or if the grease fitting can no longer channel and facilitate the lubrication process. This could occur if the grease fitting is damaged to the point of reduced or no functionality or if the grease fitting is lost or misplaced, in which case it should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This grease fitting is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Murray, Ariens, and Dixon.

This replacement part is a bushing outlet and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is small but very important to the overall operation of many different types of machines and power appliances. Bushings help connect two different pieces of equipment and often aid in helping them work together as well as minimize friction and heat during use.A new bushing outlet might be needed if the current one is visibly damaged or missing. Because of where this part is situated it is possible for the bushing to become stripped or damaged overtime and it is not unusually replaced. If there are parts of the machine that are creating unusual noises, it might be time to replace the bushing. This bushing outlet is a genuine OEM replacement part. This part is sold individually and is sourced from the manufacturer.

This battery cable is a genuine Husqvarna part, sold individually. A battery cable can be used as a replacement part in a lawn mower or a tiller. This genuine OEM part, built for one of these outdoor appliances, is made out of high quality, durable material.The battery cable in a lawn mower or a tiller might require eventual replacement if it shows clear signs of damage at any point during the typical lifespan of the appliance. The battery cable can be frayed, torn, ripped, scraped, scratched, warped, or eroded. If this occurs, the battery cable should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions in a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This battery cable is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This fuel line is a genuine Husqvarna part, sold individually. This fuel line can be used as a replacement part for a lawnmower. This fuel line for a lawnmower provides a path for fuel pass through in order to reach the fuel tank.The fuel line might have to be replaced at some point within the standard lifespan of the appliance if it is severed in some way that prevents the fuel from reaching the fuel tank or that leads to fuel leakages. If there is fuel leaking from the area of the fuel line or if the fuel line has been frayed, severed, punctured, or torn, the component should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel line is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This spring is a torsion spring. It is a genuine Husqvarna part. It is a replacement part for lawn mowers, lawn tractors, and riding mowers. On these machines, the torsion spring is part of the pivot bracket. It helps keep the shift rod in the right position.The torsion spring also creates tension and torque. Without it, the mower will not operate correctly. Before starting this repair, be sure the engine is completely cool and disconnect the spark plug to prevent accidental starting.This spring or torsion spring is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is designed to be compatible with equipment made by Husqvarna, Poulan, Weed Eater, and Craftsman. It also replaces obsolete part number 123782X.

This genuine Husqvarna replacement part is a nose roller for use with lawn tractors and riding mowers. It is also known as a deck roller. A properly functioning nose roller is essential for the safe and reliable use of a lawn tractor or mower. The roller attaches to the mower deck and prevents the deck from touching the ground or damaging the lawn on uneven terrain. The nose roller may become worn out or damaged with extended use, necessitating replacement. Remember to check the nose roller periodically to spot any wear or damage. This part is an identical replacement for a nose roller that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, Husqvarna, and more lawn tractors and riding mowers. Please note: original part number 132264 is now obsolete, and manufacturer has replaced the original part number with this part.

This replacement part is a sector gear, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A sector gear is a portion of a gear that contains a type of tooth, or rigid outside, that allows it to connect with others gears as well as the center bearing.If the sector gear has become stripped in the middle it might not stay in the place. This is normal and typically due to wear and tear inside the engine and machine itself. Be sure the entire device is properly shut down before attempting to replace or repair this gear. Work gloves are also recommended as some parts are sharp and dangerous. This specific gear is a genuine OEM replacement part and is sourced directly from the manufacturer. This sector gear is sold individually.