Dshs6vbggcss Parts

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This molded duct assembly directs cold air from the freezer compartment into the fresh-food section to help maintain proper airflow and temperature balance. It replaces a damaged or cracked transition duct to restore directed air circulation. What it does:

• Channels freezer-cooled air into the refrigerator compartment for even cooling distribution
• Helps reduce warm spots in the fresh-food area when functioning correctly
• Can prevent excessive frost or ice buildup caused by misdirected airflow
• Supports proper operation of the freezer-to-fridge venting system

• Disconnect power to the appliance before service to avoid electrical shock
• Remove shelves, drawers, and access panels as needed to reach the duct
• Handle the duct carefully to avoid cracking plastic tabs; use appropriate fasteners when reinstalling

This wire slideout basket for the freezer compartment restores organized storage and smooth access to frozen items. It replaces a bent, broken, or missing slideout basket so you can load and reach food easily. What it does:

• Provides a supported, sliding basket for freezer storage so items stay contained and accessible
• Replaces baskets that are bent, cracked, or no longer sliding properly
• Restores smooth slide action and prevents items from shifting or falling when opened
• Matches OEM fit and mounting points to maintain compartment function

• Remove all contents from the freezer and unplug power before beginning work
• Pull out the old basket and align the new basket with the existing slide rails or mounting brackets
• Slide into place until it seats; verify smooth travel and secure attachment before reloading
• If mounting hardware is damaged or missing, replace hardware before use

This door foam assembly replaces the insulation inside a refrigerator door to help restore thermal performance and reduce condensation. It fits behind the door panel and improves the cabinet's ability to hold cold air. What it does:

• Replaces damaged or compressed insulation inside the refrigerator door to improve temperature retention
• Helps reduce frost buildup and moisture/condensation on the door interior
• Restores proper door cavity insulation that can reduce compressor runtime caused by air leakage
• Works behind the inner door panel; not a door gasket/seal itself

• Disconnect power to the appliance before beginning any disassembly.
• Installation typically requires removal of the inner door panel; keep fasteners and clips in order.
• Handle the foam carefully to avoid tearing; some applications use adhesive or retainers to secure the foam.

This is a mobility screw used to secure mobility-related components in compatible appliances, providing a reliable fastener for stable operation and correct alignment. It replaces worn or missing screws to restore secure mounting. What it does

• Fastens and secures mobility/bracket components to prevent movement or misalignment.
• Helps maintain proper alignment of moving parts that can cause noise or binding when loose.
• Commonly replaced when mounting points are stripped, damaged, or missing.
• Small replacement part that supports overall appliance stability and safe operation.

• One screw as shown/packaged by the manufacturer.

• Use the correct screwdriver or bit to avoid stripping the screw head.
• Ensure the appliance is powered off and disconnected from the power source before accessing internal components.
• Do not overtighten; snug to manufacturer torque or until the part is secure.
• If mounting hardware or threaded inserts are damaged, replace or repair those components before installing this screw.

This freezer door handle basket replaces a cracked or worn half-basket to restore secure storage and neat appearance on the freezer door. It provides the same basic support and mounting points as the original OEM component. What it does

• Holds small frozen items on the freezer door so they stay organized and don't fall out.
• Replaces a broken, cracked, or warped basket that no longer secures items.
• Restores proper fit and alignment at the freezer door handle area.
• Helps maintain original door storage function and appearance.

• Remove items from the door before beginning; handle gently to avoid further damage.
• Most installations use snap-in tabs or a few screws—refer to the appliance's service manual for the exact procedure.
• Inspect mounting tabs and surrounding trim; replace any damaged fasteners for secure reinstallation.

This LED housing cover protects and secures the refrigerator's LED light assembly while helping direct interior light. It replaces cracked or missing housing shields to restore proper light placement and prevent debris from contacting the lamp. What it does

• Protects the LED light assembly from impacts, dust and moisture that can cause poor illumination.
• Helps position and shield the LED so light is directed into the compartment instead of toward internal components.
• Prevents loose debris from contacting the LED or lens, reducing risk of damage or nuisance shadows.
• Fits into the existing light assembly mounting to maintain original appearance and airflow pathways.

• Always disconnect power to the appliance before starting any repair.
• Remove shelves or panels as needed for access; keep mounting screws and clips for reinstallation.
• Handle the new cover carefully to avoid scratching or cracking; align tabs and press or fasten per original mounting.
• If LEDs or wiring are exposed or damaged, replace or repair those components before reinstalling the cover.

This evaporator block seal replaces the rubber gasket that seals the evaporator block assembly to the freezer cabinet, helping maintain proper airflow and prevent leakage. It restores a tight seal around the evaporator block for reliable cooling performance. What it does:

• Seals the evaporator block to the cabinet to prevent warm air intrusion and water leaks
• Helps direct refrigerant-condensed water into the drain rather than inside the cabinet
• Commonly used when you see frost build-up around the evaporator or water pooling in the freezer
• Helps maintain consistent cold temperatures by preserving the sealed evaporator area

• One evaporator block seal

• Designed for field replacement; inspect surrounding gaskets and mounting surfaces for damage before installing
• Clean and dry mating surfaces thoroughly to ensure a proper seal
• Use common hand tools; avoid over-stretching or cutting the seal during installation
• Disconnect power to the appliance before servicing and follow safety precautions for refrigeration components

This condenser shroud is the plastic cover that protects and channels airflow around the refrigerator condenser, helping the cooling system run efficiently and keeping components shielded from debris. What it does:

• Directs airflow over the condenser coils to help dissipate heat
• Protects condenser and nearby components from dust, pet hair, and accidental contact
• Helps maintain proper clearance and airflow paths behind the fridge
• Can reduce vibration noise by stabilizing condenser area

• One condenser shroud/cover

• Designed to mount in the condenser compartment; follow your model's service manual for correct orientation and fasteners
• Disconnect power to the appliance before accessing the condenser area to avoid electrical shock
• Inspect and clean condenser coils while the shroud is removed for best performance
• If clips or screws are damaged, replace them with OEM-recommended hardware

This wiring harness connects and supplies power to the dispenser motor so the dispenser operates reliably. It replaces a worn or damaged dispenser motor harness to restore electrical continuity and dependable dispenser function. What it does:

• Carries voltage and signals between the control and the dispenser motor
• Restores power when a broken or frayed harness prevents the motor from running
• Helps stop intermittent dispenser operation caused by loose or damaged wiring
• Provides proper connector fit to maintain a secure electrical connection

• Disconnect power to the appliance before inspecting or replacing the harness
• Handle connectors gently and verify correct orientation before mating
• Route harness following original wire paths and secure with existing clips to avoid pinching
• If corrosion or other damaged components are present, inspect surrounding parts and replace as needed