Dskp333ec1ww Parts

This thermostat senses and regulates refrigerator temperature to help keep food cold and prevent overcooling. It replaces a failing temperature control to restore normal compressor cycling and temperature stability. What it does:

• Controls refrigerator/freezer temperature by switching the compressor and fans on and off as needed
• Helps maintain set temperature so food stays properly chilled and frozen
• Commonly replaced when the fridge runs continuously, won't cool, or cycles too frequently
• Works as the user temperature control interface internal component for models using this style of thermostat

• One thermostat (single unit)

• Turn power to the appliance off at the breaker or unplug before attempting replacement
• Handle carefully and avoid bending terminals; secure wiring to the correct terminals per OEM wiring layout
• Verify thermostat operation after installation by checking that the compressor and fans respond when temperature is adjusted

This drum assembly replaces the rotating tub that holds and tumbles clothes inside the dryer, restoring smooth, balanced operation and helping garments dry evenly. Fits dryers designed for this OEM drum part number. What it does

• Replaces the dryer drum that rotates to tumble clothes for even drying.
• Restores a smooth, balanced drum surface to reduce rubbing, noise, and fabric wear.
• Works with the dryer's drive and support components to maintain proper rotation.
• Can correct symptoms like loud or uneven tumbling and clothes not tumbling properly.

• Service experience recommended; drum replacement often requires disassembly of the dryer cabinet.
• Disconnect power (and gas supply for gas dryers) before beginning any repair.
• Keep fasteners and hardware organized during disassembly; verify alignment of support components on reassembly.
• Inspect rollers, glides, seals, and belt while the cabinet is open and replace as needed.

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This bracket belt switch assembly secures the dryer belt switch and helps stop the motor if the belt slips or breaks, protecting the dryer from damage and preventing unsafe operation. It's a direct-fit replacement for the original mounting assembly. What it does

• Holds the belt switch in the correct position so it can sense belt tension.
• Opens the circuit when the belt is loose or broken to stop motor operation.
• Can resolve symptoms like a dryer that stops mid-cycle, fails to start, or runs but won't tumble.
• Restores the original mounting and switch alignment for reliable belt sensing.

• One bracket belt switch assembly

• Disconnect power before beginning—this part is used on electric and gas dryers.
• Basic hand tools (screwdriver/socket) are typically required; keep track of mounting hardware.
• Inspect the belt and pulleys while replacing the bracket; replace any worn parts.

This motor and pulley assembly drives the dryer drum so clothes tumble and dry. It replaces a worn or failed drive motor and integrated pulley to restore normal drum rotation and drying performance. What it does

• Turns the dryer drum by driving the drive belt and maintaining proper drum rotation
• Replaces a noisy, weak, or seized drive motor that causes squealing or no-tumble symptoms
• Restores consistent tumbling when the motor fails to start or cuts out during cycles
• Works with the existing belt and mounting hardware when those components are undamaged

• One motor and pulley assembly (single unit)

• Disconnect power (unplug or switch off breaker) before beginning service
• Requires basic hand tools and access to the dryer cabinet; follow OEM service manual for disassembly
• Verify belt condition and install routing before mounting the motor; replace belt if worn

This shield control is an electrical shield and control assembly that protects and secures the appliance's control electronics while helping ensure reliable operation. It replaces a worn or damaged shield to restore proper protection and alignment of the control components. What it does:

• Covers and shields control circuitry and wiring from debris, moisture, and physical contact
• Secures control components in the correct position to prevent loose connections
• Helps reduce risk of shorting or intermittent electrical faults caused by exposed electronics
• Common symptom: visible damage, cracked or warped shield, or control connections that appear loose

• One shield control assembly

• Disconnect power to the appliance before accessing controls to avoid shock or injury
• Handle the control area carefully and avoid touching circuit boards or connector pins
• Inspect connectors and wiring for damage; replace or reseat connectors as needed for proper fit

This door gasket seals the fridge/freezer door to maintain proper temperature and efficiency. Replaces a worn or torn seal to help reduce frost buildup and prevent cool air loss. What it does:

• Creates an airtight seal around the door perimeter to keep cold air in and warm air out.
• Helps prevent frost and ice buildup inside the compartment.
• Reduces compressor run time and helps maintain consistent internal temperatures.
• Common symptoms: visible gaps, torn or compressed seal, noticeable temperature fluctuations, or excess frost.

• Disconnect power before starting and work with clean, dry hands.
• Remove the old gasket by loosening retaining screws or pulling from the channel as applicable; inspect the channel for debris.
• Align the new gasket evenly and press into the door channel, working around the perimeter to ensure full contact.
• If needed, soften the gasket with warm water or a low-heat source per OEM guidance to help seat corners; avoid open flames.

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware