Du8100wto Parts

This grate captures heavy soils and debris at the bottom of the washer tub to help reduce re-deposition on clothing and keep the drain area clearer. Restores proper soil separation for more consistent wash results. What it does:

• Traps heavy dirt and debris so it doesn't recirculate onto clothes during the wash.
• Helps keep the drain/under-tub area clearer, reducing the chance of clogs.
• Supports proper water flow and soil separation for improved cleaning performance.
• Common symptoms indicating a failing or missing part: clothes still look soiled after a cycle, visible debris in the tub, or frequent drain blockages.

• One grate

• Disconnect power and shut off water before servicing the washer.
• Drain the tub and remove any agitator or tub components required for access.
• Use basic hand tools; avoid forcing parts or over-tightening plastic components.

For mating terminal use WP94614.

This wet agent dispenser replaces the washer's liquid fabric softener dispenser to restore proper dispensing during the rinse cycle. It helps keep softener contained until the machine is ready to release it, improving rinse-time performance. What it does:

• Holds and releases liquid fabric softener (wet agent) into the rinse cycle
• Ensures softener is delivered at the correct time for even distribution
• Stops leaking or premature release when the dispenser housing is intact
• Commonly replaced when the dispenser cracks, clogs, or fails to dispense

• Disconnect power to the appliance before starting any repairs
• Access method varies by model; remove dispenser drawer or top panel per your model's service instructions
• Inspect surrounding seals and clips; replace if damaged to prevent leaks

For mating terminal use [AP31136300].

Touch-up paint for repairing small chips, scratches and scuffs on painted appliance surfaces. Restores the appearance of localized damage so repaired areas better blend with the surrounding finish. What it does:

• Covers small chips and surface scratches to improve cosmetic appearance.
• Helps conceal finish wear on painted metal and plastic trim.
• Lets you spot-repair without replacing large panels or parts.
• Works for quick, visible fixes where full repainting isn't needed.

• Clean and dry the repair area thoroughly before applying; remove loose paint or rust.
• Test on an inconspicuous area first to confirm color match and compatibility.
• Apply sparingly in thin coats with a small brush or cotton swab; allow each coat to dry before adding more.
• Use in a well-ventilated area and keep out of reach of children; follow any handling instructions on the product label.

Seal head assembly replaces the seal around the dishwasher pump motor shaft to stop leaks and protect the motor. It restores a watertight seal so the dishwasher drains safely and avoids cabinet water damage. What it does:

• Seals the pump motor shaft to prevent water from leaking into the motor and cabinet.
• Helps stop under-dishwasher puddling, external leaks, and moisture-related motor issues when the original seal fails.
• Restores proper drainage path by maintaining the seal between the pump and housing.
• Compatible with service procedures that replace the pump seal as directed by OEM diagrams.

• Disconnect power and turn off the water supply before servicing.
• Drain the dishwasher and remove access panels to reach the pump; handle the seal carefully to avoid damage.
• Inspect surrounding gaskets and pump housing for wear; replace any damaged components to ensure a proper seal.
• After installation, run a short cycle and check thoroughly for leaks before returning the dishwasher to regular use.

Float that detects and communicates water level to the appliance control so the washer or dishwasher can fill and drain properly. Replaces a cracked, stuck, or worn float to restore reliable water sensing. What it does:

• Senses water level and relays position to the machine's control system.
• Helps prevent overfilling or unintended continuous filling when working correctly.
• Can resolve symptoms such as flooding, constant filling, no fill, or improper drain cycles.
• Works with the appliance's existing valve and switch components to re-establish normal fill/drain operation.

• Disconnect power (and water supply where applicable) before beginning service.
• Remove outer panels or tub shroud to access the float; use basic hand tools.
• Handle clips and fittings gently; do not force plastic tabs or connectors during removal/installation.
• After installation, restore power and run a test cycle to ensure correct fill and drain behavior.

This flexible replacement hose routes water safely in your appliance to restore normal water flow and prevent leaks. It replaces a worn, cracked, or leaking factory hose so your appliance can operate reliably. What it does:

• Carries water between components to maintain proper appliance operation
• Helps stop leaks caused by brittle, cracked, or damaged hoses
• Compatible with original mounting and connection points when replacing the same part number
• Common symptom: visible leaks, reduced water flow, or water pooling near the appliance

• Turn off power and shut off water supply before attempting replacement
• Inspect fittings and clamps; reuse only if undamaged, otherwise replace with proper hardware
• Ensure secure, leak-free connections and verify no kinks in the hose after installation

Split-ring seal designed to secure a door or panel gasket and maintain a watertight/airtight joint, helping stop leaks and keep the appliance operating properly. Ideal for replacing worn or damaged seals. What it does:

• Holds and seals the gasket or trim in place to prevent water or air from escaping.
• Restores a tight seal around doors, panels or openings that show gaps or wear.
• Helps stop common symptoms like leaking, moisture buildup, or visible gaps at the seam.
• Keeps components aligned so doors close smoothly and seals wear evenly.

• Always disconnect power and turn off the water supply before starting any repair.
• Use hand tools to remove trim or retaining rings carefully; wear gloves to protect hands from sharp edges.
• Inspect surrounding gasket and mounting surface; replace damaged gaskets and clean mating surfaces before installing the new ring.
• After installation, test the appliance for proper seal and operation.

Bottle with brush. Color: Platinum. Size: 0.6 fl.oz.

This package contains one roller. To order a set of 4 use 4317933.

This seal collector is a molded collector seal that helps contain and direct water away from sensitive components, reducing leaks and moisture damage. It replaces a worn or cracked collector seal to restore normal water containment. What it does

• Channels and contains water at the tub/door interface to prevent leaks
• Replaces torn, hardened, or deformed seals that allow moisture escape
• Helps prevent water from reaching electrical components and undercarriage
• Commonly replaced when visible gaps, cracks, or persistent leaks are present

• One seal collector

• Disconnect power and water before starting any repair
• Access may require removing the door, kick panel, or access panels depending on model
• Inspect mating surfaces and clean debris before installing the new seal for proper fit

This silverware basket is a dishwasher utensil caddy that organizes forks, knives and spoons so cutlery cleans evenly and stays contained during the wash cycle. It fits into the lower rack and helps prevent items from shifting. What it does:

• Holds and separates silverware and small utensils for better cleaning and safer handling
• Keeps loose items from falling into the wash area or blocking the spray arms
• Snaps into the lower dishwasher rack to stay secure during cycles
• Works with standard dishwasher racks that accept a removable utensil caddy

• One silverware basket

• Place the basket into the lower rack and align so it sits securely in the rack slots
• No tools required for standard installation; handle with care to avoid sharp utensils
• Inspect for broken tabs or clips before installing; damaged mounting points can allow the basket to shift
• Clean periodically to remove food buildup and prevent odors

Color: White. Size: 13 oz. Spray paint primer. can.

This small lever seal fits the dishwasher's detergent cup/dispenser. It seals around the lever/shaft to keep wash water out of the cup until the release cycle, helping deliver detergent at the right time for effective cleaning.

• Creates a watertight seal around the detergent cup lever/pivot
• Helps keep detergent dry until the main wash
• A worn or shrunken seal may allow early detergent washout or water in the cup before it opens
• Replacing the seal can help restore proper dispenser performance

• Disconnect power to the dishwasher before servicing
• Access the dispenser from the inner door; note lever and seal orientation
• Remove the old seal, clean the groove/shaft, and press the new seal fully into place
• Reassemble and run a short cycle to verify proper dispenser operation

This disk mount is a small replacement mounting disk that secures and aligns internal components so the appliance operates quietly and reliably. It restores proper fit where a worn or damaged mount causes misalignment or vibration. What it does:

• Provides a secure mounting point for internal assemblies and helps maintain correct component alignment
• Reduces vibration and rattling caused by a broken or deteriorated mount
• Supports stable operation and prevents excess wear on adjoining parts
• Commonly replaced when mount is cracked, warped, or missing

• One disk mount as shown

• Basic hand tools typically required; inspect surrounding components for damage before reassembly
• Disconnect power and/or gas and follow appliance safety procedures before starting work
• Retain all fasteners and observe correct orientation during installation