Dwhd650wpr/15 Parts

The Base Panel is an OEM replacement part for Bosch dishwashers. It serves as the protective front cover for the dishwasher's base, hiding the internal parts and providing a finished look to your appliance.

A bad base panel can occur due to accidental damage, wear and tear, or discoloration over time. Signs of a faulty base panel include cracks, dents, or a worn-out appearance.

Symptoms of a bad base panel include:

• Visible cracks, dents, or damage 
• A worn-out or faded appearance
• Difficulty in cleaning the panel

Restore your Bosch dishwasher by replacing the damaged or worn-out base panel with this genuine OEM part. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This shaped handle cap covers the end of a dishwasher door handle to restore a finished look and protect the handle connection. It keeps the door appearance consistent and hides the fastener area for a clean, finished fit. What it does:

• Replaces a damaged, cracked or missing handle end cap to restore appearance
• Covers and protects the handle mounting point from dirt and wear
• Prevents sharp edges or exposed fasteners on the door handle
• Matches the original profile so the handle closes and looks correct

• High-level replacement; may require removal of the door trim or handle screws—refer to your model's service instructions
• Disconnect power and water to the appliance before starting work to avoid injury
• Handle with care to avoid scratching painted surfaces; use appropriate trim tools if needed
• If fasteners are damaged, inspect and replace them with OEM-recommended hardware

This shaped handle cap covers and finishes the end of a compatible appliance handle, restoring a clean appearance and helping protect the handle edge from wear. Fits as a direct replacement for a worn, cracked, or missing end cap. What it does:

• Covers the exposed end of the handle for a finished, factory look
• Protects the handle end from chips, scratches, and snagging
• Helps keep the handle grip comfortable and secure
• Restores cosmetic appearance after impact or wear

• Installer tip: this cap typically snaps or slides into place; remove any broken pieces before installing
• Use a plastic trim tool or gloved hand to avoid scratching surrounding surfaces
• Do not force excessively; if the cap does not seat easily, inspect the handle for damage or mounting clips

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This replacement cover protects internal components and finishes the appliance's exterior where installed. It restores a clean, secure appearance and helps prevent dust, moisture, and debris from reaching sensitive parts. What it does:

• Serves as a protective access panel for internal components
• Shields wiring, connectors, and electronics from dust and incidental contact
• Restores the appliance's exterior finish for a cosmetically complete repair
• Helps maintain safe operation by covering moving or live parts

• Before installing, disconnect power and water to the appliance to avoid shock or injury.
• Remove any trim or fasteners holding the old cover; keep screws for reuse.
• Align the cover carefully and secure with the original mounting hardware; do not force parts.
• If plastic clips or tabs are damaged, replace them to ensure a secure fit.

This replacement cup rack secures cups and small glassware on the dishwasher's upper rack, keeping items upright and preventing shifting during the wash for more consistent cleaning results. What it does:

• Provides dedicated support for cups, mugs and small glasses on the upper rack
• Helps prevent tipping, sliding and breakage during wash cycles
• Restores missing, cracked or warped cup-holding sections
• Compatible with dishwasher upper rack mounting points and clips

• One cup rack assembly

• Remove the upper rack for easier access; refer to your dishwasher manual for rack removal steps
• Align and snap the rack into the designated upper-rack mounting points; some models may use retaining clips or small fasteners
• Handle edges and clips carefully to avoid damage; wear gloves if needed

This insert secures or positions internal components in compatible Bosch appliances, helping restore proper fit and alignment for smooth operation. Use it to replace a worn or damaged insert that causes loose panels or shifting parts. What it does:

• Provides a secure mounting point to hold panels or internal parts in place
• Restores proper alignment to reduce rattling or movement during operation
• Replaces worn or broken inserts that can cause gaps or improper seating
• Helps maintain consistent function by keeping components correctly positioned

• Basic hand tools are typically required; disconnect power and water before starting
• Handle small plastic or metal inserts carefully to avoid damage during installation
• Keep fasteners and surrounding parts organized to ensure correct reassembly

This is a replacement door handle that restores safe, reliable grip and normal door operation. Designed to match the original fit and appearance for a clean, factory-style repair. What it does:

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, broken, loose, or missing handles that make the door hard to operate
• Restores proper alignment so the door seals and latches correctly
• Returns the appliance's exterior to a finished, like-new look

• One replacement handle

• Disconnect power and water before starting any repair
• Typically mounts to the door with screws or clips; inner door panel removal may be required
• Inspect fasteners and surrounding trim for damage and replace as needed

This replacement cutlery drawer is the removable silverware tray that installs at the top of select Bosch dishwashers to organize utensils and improve cleaning access. Restores proper utensil placement and keeps forks, knives and spoons separated during the wash. What it does:

• Holds and organizes cutlery and small utensils in a dedicated top-drawer location
• Keeps items separated so water and detergent reach utensil surfaces for better cleaning
• Replaces cracked, warped or missing drawers that allow utensils to fall or shift
• Helps prevent utensils from blocking spray or interfering with the upper rack

• One cutlery drawer (single-piece silverware tray)

• High-level replacement: remove the old drawer from the upper rack and slide the new drawer into the existing guides/rails
• Check for any broken mounting tabs or guide hardware and replace if needed
• Do not force the drawer; align rails and test smooth travel before running the dishwasher
• Disconnect power to the appliance before inspecting or replacing parts if required for access