Dwhd770wpr/17 Parts

This inlet seal is a small rubber gasket that creates a watertight connection at the dishwasher's water inlet. Replacing a worn seal helps stop leaks and ensures the inlet valve can fill the appliance properly. What it does:

• Seals the water inlet connection to prevent drips or steady leaks underneath the dishwasher
• Maintains a tight seal at the inlet valve so the fill cycle can operate normally
• Commonly replaced when there is visible wear, cracking, or persistent water on the floor
• Helps avoid water damage and the nuisance of repeated drainage or fill errors tied to leaking

• One inlet seal

• Turn off the water supply and disconnect power before servicing
• Remove the inlet valve or access panel as needed to reach the seal; replace with the old seal removed
• Make sure the new seal is seated evenly and the mating surfaces are clean before reassembly

This push button set replaces worn or broken control-panel buttons so you can restore button function and appearance on the appliance. Simple, direct replacement for damaged or stuck push-style control buttons. What it does:

• Replaces damaged, cracked, or missing push-style control buttons
• Restores tactile response for panel controls that feel stuck or unresponsive
• Improves appearance of a faded or worn control surface
• Helps recover normal user input when original buttons no longer actuate properly

• One push button set

• Disconnect power to the appliance before starting any repair
• Remove the control panel trim or access panel to reach the button assembly
• Replace buttons carefully; avoid pulling on wiring or the control board
• Reassemble panels and test button operation before finishing

This water distributor directs rinse and wash water to the dishwasher spray arms for even cleaning and circulation. Replacing a faulty distributor restores proper water routing and helps recover normal wash performance. What it does

• Channels wash and rinse water to the spray arms and wash assembly
• Ensures correct water flow timing during wash cycles
• Commonly replaced when spray arms fail to spin or performance drops
• Can cause poor cleaning or uneven spraying if cracked, clogged, or leaking

• Disconnect power and shut off the water supply before starting
• Access typically requires removing the dishwasher base panel or lower access panel
• Handle clips and seals carefully; replace any damaged gaskets to avoid leaks
• Test for leaks and proper spray-arm operation after reassembly

This push button set replaces the worn or damaged control buttons on compatible Bosch appliance control panels, restoring tactile feedback and reliable user input for cycle selection and control functions. What it does:

• Replaces broken, cracked, or missing push buttons that prevent normal panel operation
• Restores proper tactile feel for selecting cycles, options, and other controls
• Helps eliminate buttons that stick, don't depress fully, or fail to register presses
• Improves appearance of the control panel when original buttons are faded or discolored

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Typically installs from the front of the control panel; may require removing the outer panel or trim
• Handle buttons gently—do not force; align clips or posts before pressing into place

This replacement rail restores smooth, supported movement of a dishwasher rack so loading and unloading work as intended. It replaces a worn, cracked, or bent rail to stop sagging and improve rack alignment. What it does:

• Guides the dishwasher rack along its track for consistent in-and-out motion
• Supports rack weight to prevent tipping or sagging when extended
• Replaces damaged, cracked, or worn rails that cause noisy or jerky operation
• Helps restore proper rack alignment and engagement with the rollers

• Disconnect power and turn off water supply before beginning any repair.
• Remove the affected rack to access and replace the rail; keep small clips or fasteners for reassembly.
• Inspect rack rollers and mounting clips; replace any damaged components for best performance.

This bottom case is the dishwasher base assembly that protects internal components and helps contain leaks, keeping the wash system stable and secure. It's a direct-fit replacement that restores the appliance's lower enclosure. What it does

• Forms the appliance's lower enclosure to shield the pump, motor and wiring from debris
• Helps direct and contain water in the event of minor leaks to protect surrounding components
• Provides mounting surfaces for lower hardware and supports correct alignment of internal parts
• Can reduce rattles or vibration caused by a damaged or cracked lower shell

• One bottom case

• Disconnect power and water supply before beginning any repair
• Handle the part carefully to avoid damaging edges, clips or mounting tabs
• Keep fasteners and any hardware from the original unit; verify fit and alignment before tightening
• If you see water or corrosion, dry and inspect surrounding components for damage before reassembly

This insert is a small trim/cover piece that restores the finished appearance and protects internal edges where fitted. Replacing a damaged or missing insert helps prevent debris buildup and keeps the appliance looking and functioning as intended. What it does

• Covers exposed openings or edges to provide a finished appearance
• Protects internal components from debris and accidental contact
• Stops rattling or movement caused by a cracked or loose insert
• Helps maintain proper alignment of adjacent trim or panels

• One insert as shown

• Typically installs with snap-fit tabs or screws; align and press or fasten securely
• If part is behind a panel, remove the outer panel before installing
• Disconnect power before accessing areas with electrical components or heating elements
• Use only manufacturer-recommended fasteners; replace any broken clips to ensure secure fit

This is a replacement electrical cable harness used to restore power or signal connections inside compatible appliances. It provides a direct, OEM-style connection for reliable operation and safer performance than damaged wiring. What it does:

• Replaces damaged or frayed wiring that can cause loss of power, intermittent operation, or control failures
• Restores proper electrical connections between components to prevent shorts or erratic behavior
• Helps eliminate issues like unresponsive controls, motors that won't run, or intermittent cycle problems
• Matches the OEM routing and connector style for correct fit and reliable contact

• Disconnect power before starting any repair to avoid shock or injury
• Inspect connectors and routing; replace any retainers or clips that are damaged
• Ensure connectors are fully seated and wires are routed away from moving parts and heat sources

This cutlery basket provides a simple, removable container for holding forks, knives and spoons securely during dishwasher cycles so flatware cleans evenly and stays organized. Designed to fit compatible dishwasher lower racks. What it does:

• Holds and separates flatware to improve water flow and cleaning coverage
• Helps prevent nesting and scratching of utensils during wash cycles
• Keeps small items contained for easy loading and unloading
• Designed for use in the dishwasher rack where cutlery is typically placed

• No tools required; place into the dishwasher rack and align so it sits flat and secure
• Inspect basket for cracks or breaks before use; replace if damaged
• Clean periodically to remove food debris and avoid odor buildup
• Keep out of direct flame and do not use as a storage container outside dishwasher use

A replacement fascia-panel screw used to secure the control/face panel on compatible Bosch appliances. Restores proper panel alignment and keeps the front assembly fastened for safe, stable operation. What it does:

• Fastens the appliance fascia or control panel to the cabinet or inner frame
• Helps maintain correct panel alignment to prevent rattling or gaps
• Keeps the control components secured so buttons and knobs operate reliably
• Small replacement part for repairing loose or missing panel fasteners

• One fascia-panel screw

• Use the matching screwdriver or bit size to avoid stripping the head
• Tighten until snug; do not overtighten to prevent panel damage or stripped threads
• Disconnect power to the appliance before accessing internal panels to reduce shock risk
• Replace all affected fasteners for even fit

This single-use dishwasher cleaner removes limescale, grease and odor-causing residue from the interior and spray arms to help restore cleaning performance. It's designed for routine maintenance between deep-clean services. What it does:

• Dissolves limescale, hard-water buildup and mineral deposits that can reduce spray-arm flow and detergent action
• Breaks down grease and food film that cause lingering odors or cloudy glassware
• Helps clear residue from seals, filter housing and spray nozzles for more consistent wash results
• Safe for use in dishwasher tubs and internal components when used as directed

• One single-use bottle of dishwasher cleaning solution

• Follow the dishwasher maker's directions: typically empty dishwasher, place bottle in the rack or dispenser, run the specified cleaning cycle
• Use only as directed; do not mix with other chemicals or detergents
• Keep out of reach of children and pets; avoid contact with skin and eyes — rinse thoroughly if contacted
• Dispose of container per local regulations after use