Eb388610 Gaggenau Oven Parts

This Halogen Bulb is an OEM part for Bosch Ranges. It provides illumination for the range's interior. Continuous use or high temperatures can cause the bulb to burn out or fail.

What Causes a Bad Halogen Bulb: 
Repeated heating and cooling cycles, along with continuous use, can cause the halogen bulb to burn out or break.

Symptoms of a Bad Halogen Bulb:

• The bulb is not lighting up
• Visible signs of damage or a broken filament
• Flickering or intermittent lighting

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This door hinge provides the pivot point that lets the appliance door open smoothly and close flush. Replacing a worn or bent hinge restores proper alignment and sealing for safe, reliable door operation.

• Provides the pivot point that guides door opening and closing
• Helps keep the door square to the cabinet for a consistent seal
• Wear or damage can cause sagging, binding, gaps, or a door that won't close flush
• Restores smooth movement and proper door alignment

• Disconnect power before servicing; also shut off gas or water
• Support the door during removal to prevent damage or injury
• Transfer any mounting screws/brackets from the old hinge to the new one
• After installation, verify door alignment and gasket contact; adjust as needed

This temperature limiter is a safety thermostat that stops heat when temperatures exceed safe limits, protecting the appliance from overheating and potential damage. It's a direct-fit replacement designed for the original thermal cutoff function. What it does:

• Monitors heater temperature and opens circuit if the unit overheats
• Prevents continuous heating that can cause component damage or fire risk
• Common failure symptoms: appliance won't heat, intermittent heating, or tripped thermal safety
• Works as part of the heating/temperature-control safety chain

• Disconnect power (and gas if applicable) before access and replacement
• Located near the heating element or blower housing; follow your model's service manual for access
• Inspect wiring and adjacent components for heat damage; replace damaged parts as needed

This temperature probe reads oven cavity temperature and sends accurate signals to the control board so your range or wall oven cycles heat correctly for reliable cooking results. It's the factory-style replacement used with compatible Bosch built-in ovens. What it does

• Senses oven internal temperature and reports it to the control board so the unit maintains set cooking temperatures.
• Helps correct symptoms such as inconsistent baking, undercooked or overcooked food, and temperature-related error codes.
• Works as the replaceable probe that plugs into the oven's probe/socket assembly; restores proper thermostat feedback when faulty.

• One temperature probe

• Disconnect power to the appliance before accessing electrical components.
• This probe typically plugs into the oven's internal connector or socket; inspect alignment and seating before powering on.
• Handle the sensor carefully—avoid sharp bends, kinks, or crushing the probe lead.

This oven temperature probe is the internal sensor that monitors cooking cavity temperature so the oven control can regulate heat for accurate cooking and bake results. It's a direct-replacement sensing probe for compatible Bosch ovens. What it does:

• Measures internal oven temperature and sends readings to the control board
• Allows the oven to maintain set temperatures for consistent cooking
• Common symptoms of a failing probe: inaccurate oven temps, oven not reaching set temperature, or temperature-related error codes
• Works with the oven's control system to help cycle heating elements or gas valve

• Disconnect power to the appliance before servicing to avoid shock hazard
• Handle the probe and its wiring gently; avoid sharp bends or pulling on connectors
• Verify connector orientation and secure connections to the control board per OEM diagram

This wire oven rack provides a stable, heat-resistant surface for cookware and bakeware so you can position dishes at the correct height for even cooking. It replaces a bent, warped, or missing rack to restore usable oven shelf space. What it does:

• Supports pots, pans and baking sheets for safe, even cooking
• Slides into oven side rails to position food at different cooking heights
• Restores a warped or bent rack that causes uneven cooking or cookware instability
• Replaces a missing rack so you can use multiple shelf positions again

• Allow the oven to fully cool before handling or installing the rack
• Slide rack into the oven side rails until it seats; secure fit
• Wear gloves to avoid sharp edges and to protect from grease residue
• No special tools required; check oven manual for rail/stop details if needed

This electronic control module replaces the appliance's main control board to restore correct cycle control and user-interface functions. Designed to address failures in the control electronics so the appliance can run programmed cycles reliably. What it does:

• Receives inputs from buttons/sensors and directs power to components during cycles
• Controls timing, cycle selection, and start/stop functions
• Can resolve symptoms like unresponsive controls, incorrect cycles, or a blank/erratic display
• Works with the appliance's existing wiring harness and user interface to manage operation

• One control module

• Disconnect power to the appliance before starting any repairs
• Handle the board carefully; avoid static discharge and do not touch soldered components
• Verify connector orientation and secure all wiring; recheck connections before restoring power
• For any calibration or programming steps after installation

This convection fan motor circulates oven air to promote even heat distribution for baking and roasting. Replacing a failed motor restores airflow so your oven can maintain more consistent cooking temperatures. What it does:

• Spins the convection fan to move hot air throughout the oven cavity for more even cooking and browning
• Common symptom: uneven baking or roasting where food cooks hotter in some areas
• Common symptom: fan doesn't run, hums, or runs intermittently
• Common symptom: increased vibration or loud noise coming from the oven interior

• Disconnect power to the appliance before starting any service to avoid shock hazard
• Access usually requires removing oven panels or the rear cover; handle sharp sheet metal carefully
• Match part number and connector type before installation; secure mounting and wiring per OEM guidance