Efls627uiw Parts

The Vane is an OEM part for Frigidaire washing machines. This part is responsible for the movement and circulation of clothes inside the washer drum during the washing cycle. 

Causes of a bad vane can include wear and tear from regular use, physical damage from foreign objects in the drum, or degradation of the material over time.

Symptoms of a bad vane include:

• Clothes tangling or not moving properly during the wash cycle
• Increased noise during operation
• Visible damage or wear on the vane
• Poor cleaning results

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shipping Support Kit is an OEM part for Frigidaire washing machines. This kit includes components designed to secure the internal parts of the washing machine during transport, preventing movement that can cause damage. 

Common causes for the need of a shipping support kit typically involve preparation for moving or transporting the washing machine. 

Symptoms of needing a Shipping Support Kit include:

• Internal damage observed after moving the appliance
• Unusual noises or excessive vibration when starting the washer for the first time after moving
• Misalignment of internal components visible or detectable during setup

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Belt is an OEM component specifically designed for Frigidaire front-loading washers. It plays a vital role in powering the washer drum during spin cycles.

The belt connects the motor to the drum allowing for faster, more efficient removal of water after the wash cycle. Even with heavy loads, the belt provides the necessary rotational force. 

Symptoms of a bad belt include:

• The washer fails to complete full spin cycles
• Unusual vibrations and noises during the operation  
• Damaged or shredded remains of the old belt 

Causes of belt failure can include normal wear and tear over many machine hours and cycles. Damage from foreign objects inside the drum is also possible.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washer models. Replacement restores full cycle functionality.

This is a dispenser inlet gasket intended for use on washing machines. This part ensures that the hot and cold water lines do not leak at the point where they are connected to the appliance. If the washing machine is leaking, the gasket may need to be replaced.Replacing a dispenser inlet gasket in a washing machine can be done easily. Screwdrivers and pliers are required. Disconnect the appliance before starting the repair. Wear work gloves for safety. The hot and cold water lines should both be turned off and removed to prevent flooding.This dispenser inlet gasket is an authentic OEM replacement part. It is sourced from the manufacturer. The replacement component is made of high-quality materials. It can be installed in several different models of washing machines. The dispenser inlet gasket is compatible with appliances produced by Frigidaire, Gibson, Electrolux, Westinghouse, and Kelvinator brands.

The Spring is an OEM part for Frigidaire washing machines. It is a component that assists the movement of the inner basket or tub during the wash cycle. The spring plays a crucial role in dampening vibrations and absorbing shocks to provide stability, preventing excessive noise and movement.

Causes of a spring failure can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the spring, or damage due to impact or mishandling.

Symptoms of a bad Spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or walking during operation
• Leaks due to increased stress on the tub and other components

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Pump Assembly is an OEM part for Frigidaire washing machines. This assembly includes both the pump and its mounting bracket, working together to remove water from the washer tub. During drain cycles, the pump works vigorously to expel soiled water through the drain hose and out of the machine.

Causes of a bad pump assembly can include residue buildup clogging the pump mechanism over time, worn impeller blades with reduced efficiency, or damage to internal components that restrict water flow.

Symptoms of a failed pump assembly involve issues with drainage, including:

• Water not fully exiting the machine after drain cycles
• Extended drain times with gradual emptying
• Leaks or flooding observed around the rear of the machine

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Main Control Board is an OEM component specifically designed for Frigidaire washing machines. It is responsible for regulating all electrical aspects of the washer functions such as wash cycles, spin speeds, temperature levels, and additional settings like steam and pet hair removal cycles.

Causes of a bad control board can include water damage due to leaks, failure over extended use, or physical damage to components on the board.  

Symptoms of a bad control board include:

• The washer not powering on or rotating 
• Inability to select or change wash cycles
• Display lights or controls malfunctioning
• Error codes showing on the display

This OEM replacement allows you to restore full operational control of your washer. It is compatible with your original equipment and engineered to withstand continuous use. This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

This replacement hose routes water within your washer. Replacing a cracked, worn, or leaking hose restores a secure, watertight path so the machine can move water properly without puddles or performance issues.

• Transfers water between internal components during wash cycles
• Maintains a sealed flow path to help prevent leaks
• Damage may present as water on the floor, moisture under the unit, or related fill/drain errors
• Cracks, swelling, abrasion, or loose connections are common failure signs

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Note hose routing and clamp positions before removal; photos can help
• Transfer or replace clamps as needed; seat connections fully and secure firmly
• Run a test cycle and check all connections for leaks

The Drain Hose is an OEM part for Frigidaire washing machines. The drain hose transports water from the washer tub to the standalone drain or out the back of a pedestal model during the drain cycle.

Causes can relate to standard hose degradation from constant use, accidental kinking that restricts flow, or physical damage by pets chewing the hose.

Symptoms of a bad drain hose include:

• Puddles or water leaks near the washer during and after cycles
• Smelly or mildewed hose from standing water
• Kinked or cracked hose that no longer fully drains water

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This clamp secures a hose to its fitting, maintaining a tight, leak-resistant seal at the connection. Replace a fatigued or missing clamp to help prevent drips and stop hoses from working loose under vibration.

• Holds a hose firmly on a pump, tub, dispenser, or valve outlet
• Maintains clamping force to help minimize leaks at the joint
• Helps keep hoses from slipping off during operation
• Common signs: water at a hose joint, loose/slipping hose, damaged or corroded clamp

• Disconnect power and shut off water supply before servicing
• Place a towel or pan to catch residual water at the connection
• Note hose position; remove the old clamp, seat hose fully on the fitting, position the new clamp over the bead, and secure
• After reassembly, run a short cycle and check for leaks

The Filter is an OEM part for Frigidaire washing machines. This part traps debris, lint, and small objects that get washed out from clothes during the wash cycle. By filtering out these materials, the pump filter protects the drain pump and hose from clogs and potential damage, ensuring that the washing machine operates efficiently and the drainage system remains clear.

Causes of a bad washer pump filter can range from accumulation of lint and debris, which can clog the filter, to damage or wear that compromises its ability to filter properly.  

Symptoms of a bad filter include:

• The washing machine not draining properly or leaving clothes excessively wet
• Unusual noises from the pump area, indicating struggling or blockage
• Frequent pauses or stops during the drain cycle

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Pump Assembly is an OEM part for Frigidaire washing machines. This part is responsible for draining the water from the washer at the end of each wash cycle.  

Causes of a bad Washer Pump Assembly can include:

• Obstructions in the pump or its inlet/outlet hoses, which can hinder water flow.
• Wear and tear on the pump's motor or impeller, reducing its effectiveness in water evacuation.
• Electrical issues, such as faulty wiring or connections, that prevent the pump from operating.

Symptoms of a failing Washer Pump Assembly include:

• Water not draining properly from the machine.
• The washer fails to enter the spin cycle due to the presence of excess water.
• Unusual noises during the drain phase, indicating a struggling or damaged pump.
• Error codes displayed on the washing machine that indicate drainage problems.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

10-inch heating element that restores proper heat production in affected appliances. Replaces a worn or failed element to help resolve issues like no heat or unusually long cycle times. What it does:

• Generates heat so your appliance can reach normal operating temperatures.
• Common symptoms it addresses: little or no heat, longer-than-normal cycles, or intermittent heating.
• Replaces a single failed element to return consistent heating performance.

What's included: One heating element. Install notes:

• Disconnect the appliance from power before attempting any repair.
• Allow the element to cool and handle carefully to avoid bending or damaging the coil.
• Ensure the terminal connections are secure and free of corrosion; tighten or replace fasteners as needed.

NOTE: IF THERMISTOR HAS TERMINALS WIRE HARNESS HAS TO BE CHANGED PART# 137288900 PER FRIGIDAIRE

The Cup Assembly is an OEM part for Frigidaire washers. It is responsible for dispensing detergent, fabric softener, or bleach into the washing machine during the appropriate cycles. This dispenser cup is responsible for ensuring proper distribution of laundry products for effective cleaning and fabric care. It allows you to easily pour in the desired amount of detergent or additives.

Causes of a bad dispenser cup can include clogging, damage to the cup or its components, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad dispenser cup include:

• Improper dispensing of detergent 
• Residue or build-up in the dispenser 
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing

Replace your damaged or malfunctioning dispenser cup with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Knob Assembly is an OEM replacement part for Frigidaire washing machines. It includes the control knob that attaches to the cycle selector dial located on the washer control panel. This assembly allows users to precisely select wash cycles and temperatures with ease.

Causes for replacement may be related to normal wear over time, with heat and mechanical action contributing to component deterioration. Breaking of the control board is also possible.

Symptoms of a defective knob assembly include:  

• Loose or missing knob making cycle selection difficult
• Inability to engage desired cycles or temperature settings
• Knob cracking or buttons losing labels/functionality
• Appearance no longer matching original styling

This replacement part also fits many Electrolux, Gibson, and select Kenmore washer models.

This replacement screw secures appliance panels and internal components. A fresh fastener helps keep assemblies tight and aligned, reducing rattles and vibration so parts stay properly mounted during everyday use.

• Fastens panels, brackets, and assemblies to the appliance frame
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, and loose-fitting components
• Symptoms of a bad/missing screw: loose or noisy panel, component won't stay attached, stripped head/threads

• Disconnect power before servicing; turn off water supply if working on a washer
• Replace one screw at a time to maintain alignment and track locations
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to prevent stripping threads or heads