Eifls6olsso Parts

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

This replacement 5-foot fill hose with elbow delivers water from the household supply to the appliance, restoring proper fill flow and helping stop leaks from worn or damaged inlet lines. Designed as a direct-replacement assembly for compatible refrigerators. What it does:

• Carries water from the supply valve to the appliance's inlet connection.
• Elbow fitting provides a low-profile connection to reduce kinking at tight inlets.
• Replaces cracked, split, or leaking hoses that can cause slow/no fill or visible leaks.
• Restores reliable water delivery for ice makers and dispensers when the original hose is failing.

• Two 5' fill hoses with elbow fittings (quantity: 2).

• Shut off the water supply and unplug the appliance before starting any work.
• Inspect fittings and replace any damaged clamps; hand-start fittings, then tighten with an appropriate wrench—do not overtighten.
• Check for leaks after turning the water back on and run a fill cycle to verify proper operation.

This control panel is the exterior console trim that houses the user controls and display, restoring the appliance's interface and appearance. It lets you access and operate settings easily and keeps buttons and indicators protected. What it does:

• Replaces a cracked, faded, or damaged front console so buttons and displays are clearly visible
• Restores a secure mounting surface for control switches and touchpads
• Helps prevent dirt and moisture from reaching internal electronics behind the console
• Improves the appliance's cosmetic appearance and user operability

• One control panel

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Removal may require removing trim pieces or bezels; keep all fasteners for reassembly
• Handle panel carefully to avoid scratching or damaging the finish during install
• If the panel includes electronic components, avoid touching circuit contacts.

Replace a cracked or cloudy door window with this outer lens. It forms the transparent exterior panel of the door, protecting the inner window and restoring a clean look and clear view into the drum during cycles.

• Forms the exterior, see-through panel of the door window
• Shields the inner window and helps the door close evenly against its trim
• Replace if the outer window is cracked, chipped, warped, loose, or discolored/cloudy
• Damage may cause poor visibility or sharp edges around the door opening

• Disconnect power before servicing the appliance
• Remove the door and place it on a padded surface
• Separate inner/outer door panels, note screw locations, and lift out the old lens
• Clean mating surfaces; set the new lens in place and reassemble without over-tightening screws

This pressure hose and adapter assembly routes water under pressure to the appliance's dispenser/icemaker, restoring proper water flow for ice and dispense functions. It's a direct-fit replacement that reconnects the water line safely. What it does:

• Carries water from the supply valve to the icemaker or dispenser
• Restores proper water flow when original hose is cracked, split, or leaking
• Helps stop visible leaks and pressure loss in the supply line
• Matches OEM routing and connection points for a secure fit

• Disconnect power and shut off the water supply before beginning work
• Inspect fittings and seals; replace if damaged or corroded to prevent leaks
• Use appropriate wrenches; avoid overtightening plastic fittings

This rubber grommet cushions and protects components by isolating vibration and preventing wear where parts pass through openings. It restores proper fit and reduces noise or rubbing caused by a worn or missing grommet. What it does:

• Cushions panels, housings, or shafts to reduce vibration and noise
• Protects wiring, hoses, or metal edges from abrasion where they pass through openings
• Keeps assemblies aligned by filling mounting gaps and securing components
• Common symptom: increased rattling, vibration, or chafing around the affected area

• One rubber grommet

• Disconnect power to the appliance before beginning any repair
• Remove panels or components as needed to access the grommet; hand tools may be sufficient
• Inspect surrounding parts and replace any damaged items
• Use the OEM-style grommet to ensure proper fit and function

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation