Eiflw55hmbo Parts

A replacement mounting nut that secures components and fasteners on compatible Frigidaire appliances. Restores proper fastening to stop loose panels, trim, or hardware from shifting and reduces vibration or rattling during operation. What it does

• Secures threaded bolts, studs, or components to hold panels, brackets, or assemblies in place
• Stops loose or wobbling trim, handles, or panels that cause noise or misalignment
• Replaces a stripped, corroded, or missing nut that prevents proper fastening
• Works wherever the original OEM nut is used to retain appliance parts

• One replacement mounting nut

• Turn power off or unplug the appliance before accessing fasteners
• Use the correct sized wrench or socket to avoid rounding the nut
• Tighten securely but avoid overtightening to prevent thread damage
• Replace any stripped studs or mating hardware for a reliable repair

This cabinet damper helps control the motion of a refrigerator cabinet or door assembly for smoother, more balanced movement and reduced slamming. It restores the intended counterbalance action when the original damper is worn or broken. What it does:

• Provides counterweight action to help a cabinet or door close smoothly and stay balanced
• Reduces sudden drops, slamming, and uneven door movement caused by a failed damper
• Works as the mechanical balance component within the cabinet/door hinge/damper system
• Commonly replaced when the door feels loose, drops unexpectedly, or does not stay in position

• One cabinet damper as pictured

• For safety, unplug the appliance or disconnect power before beginning work
• Basic disassembly of the cabinet/door trim or hinge may be required; follow OEM instructions
• Verify orientation and mounting location before removing the old part to ensure correct installation

This is a genuine OEM screw used to secure appliance components. It replaces a missing or damaged fastener so panels, brackets, or assemblies stay properly attached and the appliance operates safely. What it does:

• Secures panels, brackets, or small assemblies to the appliance frame
• Restores proper fit and alignment where a screw was lost or damaged
• Helps prevent rattling, vibration, or parts coming loose during use
• Matches original thread and length for a correct fit when replacing worn hardware

• One OEM screw as shown

• Turn power off and unplug the appliance before servicing
• Use the matching screwdriver or bit to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread or part damage
• Keep removed hardware organized so all original screws are replaced

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

Replace a cracked or cloudy door window with this outer lens. It forms the transparent exterior panel of the door, protecting the inner window and restoring a clean look and clear view into the drum during cycles.

• Forms the exterior, see-through panel of the door window
• Shields the inner window and helps the door close evenly against its trim
• Replace if the outer window is cracked, chipped, warped, loose, or discolored/cloudy
• Damage may cause poor visibility or sharp edges around the door opening

• Disconnect power before servicing the appliance
• Remove the door and place it on a padded surface
• Separate inner/outer door panels, note screw locations, and lift out the old lens
• Clean mating surfaces; set the new lens in place and reassemble without over-tightening screws

This electronic control board manages the appliance's cycle logic and power to key components. Replacing a failed board can restore proper operation when the unit is unresponsive, won't start or advance, or shows recurring error codes. What it does:

• Governs cycle timing and overall machine logic
• Interprets inputs from sensors and the user interface
• Sends power to major loads such as the drive motor, pump or heater, and related components
• Common failure symptoms include no start, stalled cycles, unresponsive controls, or repeated error codes

• 1 electronic control board

• Disconnect power before servicing; handle the board with ESD protection
• Photograph wiring and transfer connectors and any jumpers/settings from the original board
• Inspect harnesses and connected loads for shorts to prevent repeat failure
• After installation, run the model's diagnostic or calibration procedure if applicable

This dispenser drawer assembly replaces a worn or damaged dispenser drawer housing to restore a clean, stable surface for filling glasses and containers from the refrigerator dispenser. Fits the dispenser opening and helps channel water/ice output. What it does:

• Replaces the fridge dispenser drawer housing that supports cups and funnels dispense flow
• Helps stop leaks and prevents cups from tipping when using the dispenser
• Restores proper alignment of the dispenser opening and trim
• Useful when the original drawer is cracked, warped, or cosmetically damaged

• Remove power to the appliance before beginning repair to avoid electrical hazard.
• Typically secures with snap tabs or a few screws; inspect surrounding trim and gaskets during install.
• Handle edges carefully to avoid scratching or damaging surrounding surfaces.