Er36d-Sch/Ng Parts

This single aluminum service valve is a sealed-system access valve used on compatible refrigeration systems to allow safe service, pressure checks and refrigerant charging. It provides a reliable access point without replacing major components. What it does

• Provides a sealed access point for refrigerant charging, pressure testing and diagnostic service
• Helps isolate the refrigerant line during repairs or evacuation
• Reduces the need to disturb larger sealed-system components when performing service
• Commonly used when addressing pressure/charge-related symptoms or performing routine diagnostics

• One single aluminum service valve

• Follow all refrigerant-handling regulations and use proper recovery equipment
• Depressurize the system and verify zero pressure before removing or installing the valve
• Inspect fittings and gaskets for damage and replace as needed to ensure a proper seal

Secures the LED assembly for stable indicator lights and display. Replace if lights are loose, misaligned, or flickering. Confirm fit with your model.

Replace a convection motor if your oven heats unevenly or takes longer to cook. This motor drives the fan that circulates hot air for even baking.

This service assembly secures the injector/nozzle in the washer dispenser area, ensuring proper positioning for reliable dispense performance. Replacing a worn or broken holder restores correct alignment and helps prevent leaks or missed dispensing cycles. What it does:

• Holds and aligns the detergent/bleach injector or nozzle within the dispenser assembly
• Keeps the injector sealed and positioned to reduce leaks or misdirected flow
• Helps restore proper dispense when the dispenser fails to deliver detergent or shows inconsistent dosing
• Works as a direct replacement for a cracked, broken, or missing injector support

• Disconnect power and shut off water before service
• Handle clips and plastic tabs carefully to avoid breakage during install

This straight bake burner replaces the oven's lower gas burner to restore consistent bake heat and flame. It installs in the oven floor and connects to the regulator and igniter assembly for normal gas flow to the bake chamber. What it does:

• Provides the primary gas flame for the oven's bake function
• Restores even baking when the oven fails to reach or hold set temperatures
• Replaces corroded, warped, or damaged burner tubes that produce weak or irregular flames
• Helps eliminate yellow or sputtering flames caused by burner damage or blockage

• One straight bake burner assembly

• Shut off power and gas supply before beginning service; follow all local codes
• Basic hand tools are typically required; gentle handling prevents deformation of the burner tube

Seals cooktop burner to stabilize the burner head and prevent debris buildup. Replace if damaged, cracked, or during burner maintenance. Confirm fit.

Rubber bumper cushions oven door and components. Replace if cracked, worn, or missing to restore quiet operation and prevent metal-on-metal contact.

Torx-head service screw secures panels, brackets, and access covers in wall ovens and ranges. Replaces missing or damaged screws to restore fit.

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

M4 x 12mm stainless steel service screw secures panels and small components in your cooktop or range. Replace worn, stripped, or missing screws.

The Stainless Steel Weather-Resistant Service Screw #8x3/8 for Gas Walk-Behind Mower is an essential component for maintaining your mower's performance. Crafted from high-quality stainless steel, this service screw is designed to withstand harsh weather conditions, ensuring long-lasting durability. The #8x3/8 size provides a secure fit, keeping your mower's parts firmly in place during operation. Using a genuine OEM part guarantees compatibility with your Samsung gas walk-behind mower, ensuring optimal performance and reliability. The weather-resistant properties help prevent rust and corrosion, extending the lifespan of your mower. Whether you're performing routine maintenance or replacing a worn-out screw, the Stainless Steel Weather-Resistant Service Screw DE81-02200A offers a dependable solution. Enhance the functionality of your gas walk-behind mower with this durable, high-performance service screw, designed to meet the highest standards of quality and functionality.

Gas burner won't light or heats unevenly? This single burner gas valve controls fuel flow to individual burners. Moderate DIY repair for cooktops.

Replace a faulty dual brass LP gas valve if your cooktop burners won't ignite or flame is uneven. Moderate DIY repair requiring gas line work. Fits multiple models.