Er36dsch/Ng Parts

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This straight bake burner replaces the oven's lower gas burner to restore consistent bake heat and flame. It installs in the oven floor and connects to the regulator and igniter assembly for normal gas flow to the bake chamber. What it does:

• Provides the primary gas flame for the oven's bake function
• Restores even baking when the oven fails to reach or hold set temperatures
• Replaces corroded, warped, or damaged burner tubes that produce weak or irregular flames
• Helps eliminate yellow or sputtering flames caused by burner damage or blockage

• One straight bake burner assembly

• Shut off power and gas supply before beginning service; follow all local codes
• Basic hand tools are typically required; gentle handling prevents deformation of the burner tube

This burner gasket seals the cooktop burner to help stabilize the burner head and limit debris or soot build-up for more consistent cooking. It's a direct-fit service seal used during burner maintenance or replacement. What it does:

• Provides a tight seal between the burner head and cooktop surface to keep crumbs and spills out of the burner area
• Helps keep the burner seated and stable for consistent heat distribution
• Reduces visible soot and debris accumulation around the burner
• Can improve burner appearance by closing gaps and preventing food intrusion
• Common symptom: visible gap around the burner, excessive soot, or a burner that wobbles

• One burner gasket (single)

• Turn off gas supply and power to the appliance before beginning work
• Remove the burner cap and head per the manufacturer's instructions to access the gasket
• Seat the new gasket evenly around the burner before reassembling components
• After reinstalling, restore power/gas and observe the burner for proper seating and normal flame behavior; stop if you detect unusual gas odor or flame issues

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

This Torx-head service screw replaces a missing or damaged #10-32 x 2 inch screw used to secure appliance panels and components, restoring proper fit and reducing noise from loose parts. What it does:

• Secures panels, brackets or service access covers to restore proper alignment
• Prevents rattling, vibration noise and movement caused by loose fasteners
• Replaces stripped, bent or missing service screws for safe operation
• Matches OEM thread size and length for a correct fit when listed for your model

• Use the correct Torx driver and proper-sized socket or bit to avoid cam-out
• Tighten until snug; do not overtighten to prevent stripping threads or damaging panels
• Disconnect power and follow manufacturer safety guidance before accessing internal components

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

A single service screw used to secure appliance components such as control boards, brackets, and panels. Replaces worn or missing fasteners to restore proper fit and stop parts from shifting. What it does:

• Secures internal components and mounting brackets to prevent movement and vibration
• Holds control boards, panels, or housings in place for reliable operation
• Helps prevent loose parts that can cause rattling or intermittent contact
• Small, OEM-style fastener sized for precision appliance assemblies

• One service screw

• Disconnect power to the appliance before servicing
• Use the correct screwdriver to avoid stripping the head
• Do not overtighten; snug to manufacturer torque or until secure
• Keep removed screws organized to ensure all are returned during reassembly

This is a replacement service screw used to secure panels and small components in compatible Samsung appliances. It restores proper fastening where a worn, damaged, or missing screw leaves parts loose. What it does

• Replaces a missing or stripped M4 x 12 mm machine screw to secure panels, brackets, or assemblies
• Stops rattling or vibration caused by loose fasteners
• Helps maintain proper alignment of small service panels and components
• Suitable where an A2 (stainless) screw is required for corrosion resistance

• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Disconnect power to the appliance before servicing nearby electrical components
• Keep small parts away from children and collect any dropped screws to avoid damage

The Stainless Steel Weather-Resistant Service Screw #8x3/8 for Gas Walk-Behind Mower is an essential component for maintaining your mower's performance. Crafted from high-quality stainless steel, this service screw is designed to withstand harsh weather conditions, ensuring long-lasting durability. The #8x3/8 size provides a secure fit, keeping your mower's parts firmly in place during operation. Using a genuine OEM part guarantees compatibility with your Samsung gas walk-behind mower, ensuring optimal performance and reliability. The weather-resistant properties help prevent rust and corrosion, extending the lifespan of your mower. Whether you're performing routine maintenance or replacing a worn-out screw, the Stainless Steel Weather-Resistant Service Screw DE81-02200A offers a dependable solution. Enhance the functionality of your gas walk-behind mower with this durable, high-performance service screw, designed to meet the highest standards of quality and functionality.

This service assembly secures the injector/nozzle in the washer dispenser area, ensuring proper positioning for reliable dispense performance. Replacing a worn or broken holder restores correct alignment and helps prevent leaks or missed dispensing cycles. What it does:

• Holds and aligns the detergent/bleach injector or nozzle within the dispenser assembly
• Keeps the injector sealed and positioned to reduce leaks or misdirected flow
• Helps restore proper dispense when the dispenser fails to deliver detergent or shows inconsistent dosing
• Works as a direct replacement for a cracked, broken, or missing injector support

• Disconnect power and shut off water before service
• Handle clips and plastic tabs carefully to avoid breakage during install