Fccf3036tf Parts

This genuine appliance screw secures panels and components to keep your refrigerator parts aligned and stable. A small but essential fastener, it restores proper fit and stops rattling or loose trim for reliable operation. What it does:

• Fastens panels, trim, or internal components to the appliance frame
• Restores secure fit when factory screws are missing or stripped
• Stops vibration- or temperature-related rattling caused by loose hardware
• Helps maintain proper spacing and alignment of serviceable parts

• Turn off and unplug the appliance before servicing electrical or internal areas
• Use the matching screw hole and thread engagement; start by hand to avoid cross-threading
• Tighten until snug—do not overtighten to prevent stripping or cracking surrounding material

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

The Bushing is an OEM part for Frigidaire cooktops. This part serves as an interface between the control knob and the appliance, ensuring smooth operation and protecting both the knob and the control panel from wear and tear. The bushing fits snugly around the valve's stem, reducing friction and providing stability as the knob is turned to adjust the heat settings of the cooktop.

Causes of a bad Bushing can include degradation from frequent use, exposure to high heat, or accidental damage during cleaning or use, which can lead to the bushing becoming loose or worn out.

Symptoms of a malfunctioning Bushing include:

• Loose-feeling knobs that wobble or are difficult to turn
• Excessive wear or visible damage to the knob or panel area
• Difficulty in achieving precise temperature control
• Unusual noise when turning the knobs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This capacitor stores and releases electrical energy to help the refrigerator's compressor start and run smoothly. Replacing a weak or failed capacitor can restore reliable compressor startup and more consistent cooling performance.

• Provides the electrical boost/phase shift needed for compressor motor startup and steady operation
• Works with the start device to deliver proper current to the compressor
• Failure symptoms can include clicking or humming near the compressor, poor cooling, or short cycling
• May cause the compressor not to start after power interruptions when weak or failed

• Disconnect power before servicing any electrical component
• Safely discharge the capacitor before handling; avoid touching terminals
• Note wire positions and terminal markings; transfer leads one at a time to the matching terminals
• Secure the capacitor in its mounting/bracket to prevent vibration damage

This medium crown burner sits on the gas cooktop/range burner to shape and distribute the flame for even heating. Replacing a worn or damaged crown restores reliable ignition and a consistent flame pattern on the medium-output burner.

• Distributes gas evenly around the burner for steady, uniform heat
• Works with the igniter for reliable lighting when properly seated
• Helps protect burner ports from spills and debris
• Helps with uneven or yellow flames, delayed ignition, inconsistent lighting, or visible cracks/warping

• Disconnect power and shut off gas; allow the surface to cool completely
• Remove the old crown and clean the mating surfaces
• Align the new crown with any locator pins/notches and seat it flat; if screws are present on your model, tighten gently and evenly
• Restore gas/power and test for proper ignition and flame pattern

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

A replacement gas pressure regulator that controls incoming burner gas flow to maintain consistent combustion and heat. Restores steady flame performance and helps prevent high or low burner output caused by a faulty regulator. What it does:

• Regulates household gas pressure to the cooktop/oven burners for stable flame and temperature control
• Helps resolve symptoms like uneven burner flames, burners that burn too high or too low, or loss of proper heat
• Works with the appliance's gas valve and manifold to keep gas delivery within safe operating range
• Passive mechanical part — no electrical connections

• Disconnect the appliance from gas supply and electricity before servicing; follow appliance manufacturer's safety instructions
• Use proper gas-approved fittings and a leak test after installation (soap solution or approved gas leak detector)
• Tighten fittings to manufacturer torque specs; do not overtighten or use sealants not rated for gas

This door gasket is a replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce temperature fluctuations. Restores proper sealing to help the fridge run efficiently and protect food. What it does:

• Seals the refrigerator door to prevent warm air from entering and cold air from escaping
• Helps reduce frost buildup and uneven cooling caused by a failing seal
• Can lower strain on the compressor by improving temperature stability
• Addresses symptoms such as visible gaps, drafts, or moisture buildup around the door

• Disconnect power to the appliance before starting any work
• Clean and dry the door frame surface before installing the new gasket for a tight seal
• Remove the old gasket carefully; use hand tools and avoid sharp implements that could damage the cabinet
• Follow the appliance manufacturer's installation instructions for proper fit and tab alignment

This small mounting clip secures interior or cabinet components to keep panels and trim stable, helping reduce noise and maintain proper alignment. It's a simple replacement that restores a snug fit where the original clip has broken or worn. What it does:

• Holds panels, trim, or small components in place to prevent gaps or rattling
• Restores proper alignment of clipped parts after damage or wear
• Maintains a secure attachment point for adjacent parts during normal use
• Helps prevent moisture or debris from entering behind secured panels

• Disconnect power or unplug the appliance before accessing internal components
• Handle the clip and surrounding trim carefully to avoid cracking adjacent plastic
• Use basic hand tools as needed; do not force clips into place—align before snapping
• Replace any damaged mounting features for a secure fit

This inner door panel replaces the interior trim piece on an oven door to restore a clean, finished look and protect the door cavity. It's a direct-fit inner panel used when the original is dented, cracked, or cosmetically damaged. What it does

• Covers and protects inner door cavity, insulation, and internal components
• Restores a smooth interior surface for easier cleaning and improved appearance
• Helps maintain proper door fit and seal when installed correctly
• Common repair for dented, warped, or cosmetically damaged inner door surfaces

• One inner door panel

• Disconnect power (and gas if applicable) and allow the appliance to cool completely before starting
• Handle any glass and the panel edges with care; wear gloves and eye protection
• Keep track of screws and brackets during disassembly; follow OEM instructions for reassembly

This replacement cooktop grate restores a stable, level surface for pots and pans on a gas range. It replaces a cracked, warped or damaged grate so cookware sits securely and cooks evenly. What it does:

• Supports cookware directly over the burner for safe, consistent cooking
• Replaces broken, chipped or warped grates that cause pots to wobble
• Helps restore proper burner clearance and even heat distribution
• Fits into the cooktop's grate seating locations without modification

• Turn off all power and gas supply and allow the cooktop to cool completely before handling.
• Lift out the old grate and set the new grate into the matching seating locations; no tools typically required.
• Handle with care—grates can be heavy and may have rough edges; wear gloves if needed.
• Do not modify the part; if the grate does not seat properly.