Fcf366ecb Parts

This oven bake element heats the interior of an electric oven for baking and roasting, restoring proper cooking temperatures and even heat distribution when the original element fails. What it does:

• Heats the oven cavity to produce consistent bake and roast temperatures.
• Replaces a cracked, burned, or nonfunctional bake element.
• Helps resolve symptoms such as oven not reaching set temperature, uneven baking, or visible element damage.
• Works with the oven's temperature controls and broil/bake circuits as the primary lower heating element.

• Disconnect power to the appliance at the breaker or unplug before attempting installation.
• Handle the element carefully to avoid bending or damaging the terminals and mounting flange.
• Verify fit and terminal type match your oven before finalizing installation.

This inner door panel replaces the plastic liner on the inside of a refrigerator or freezer door, restoring a clean interior surface and providing mounting points for bins and shelves. It helps stop air leaks and improves door appearance. What it does:

• Replaces a cracked, warped, or damaged door liner to restore structural integrity and appearance.
• Provides mounting surfaces for door bins, shelves, and gaskets so accessories fit and seal properly.
• Helps maintain proper door sealing by restoring the inner surface and alignment.
• Reduces the risk of moisture intrusion behind the liner that can cause odors or mold.

• High-level task: usually removes and installs from inside the door after removing door trim and hardware; follow manufacturer instructions.
• Use correct replacement fasteners and gaskets; do not overtighten screws to avoid cracking the liner.
• Work with the door supported to prevent dropping or bending; two-person assistance may be helpful for larger doors.
• Disconnect power if required by the manufacturer before removing door components to avoid electrical hazards.

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so you get a steady supply when needed and stop unwanted leaks. Replaces a worn or faulty valve to restore proper fill and dispensing. What it does

• Opens and closes to allow water into the ice maker and dispenser when requested
• Stops water flow to prevent overfilling or continuous running
• Commonly replaced when dispenser or ice maker won't fill, has weak flow, or leaks
• Works with the refrigerator's water line and solenoid actuators to meter supply

• One water inlet valve (single unit as shown)

• Disconnect power and shut off the household water supply before starting
• Drain lines and remove front or rear access panels to reach the valve
• Inspect and replace any damaged water lines or fittings; tighten connections and check for leaks after installation

This door gasket is a direct-replacement refrigerator door seal that helps maintain an airtight closure to keep cold air in and reduce energy loss. It restores proper sealing around the door for more consistent internal temperatures. What it does:

• Forms a tight seal around the refrigerator door to help prevent warm air intrusion and frost buildup
• Helps maintain consistent internal temperatures for better food preservation
• Reduces compressor run time caused by a leaking door seal
• Addresses common symptoms like visible gaps, cold air loss, or condensation at the door edge

• One replacement refrigerator door gasket

• Turn off power to the appliance and empty the door prior to replacing the gasket
• Remove the old gasket carefully to avoid damage to the door finish or mounting channel
• Warm and flex the new gasket as needed for easier installation and to help the gasket seat properly

This ceramic glass smooth top replaces a cracked, chipped or heavily scratched cooktop surface to restore a flat, easy-to-clean cooking area and proper cookware contact. It provides the visible cooking surface for electric smooth-top ranges. What it does:

• Replaces the ceramic glass surface that covers the range's heating elements
• Restores a smooth, flat cooking surface for even pot/pan contact
• Helps prevent food and liquid from entering the element cavity through cracks or chips
• Commonly used when the cooktop is cracked, shattered, deeply scratched, or cosmetically damaged

• One smooth top (ceramic glass) only

• Disconnect power to the appliance before starting; the glass is attached to live electrical components
• Handle with care — glass is heavy and edges can be sharp; use gloves and two people for lifting
• Some installations require removing the range surface trim or fasteners and reseating sealant or gaskets (follow OEM instructions)

This ignitor/orifice is the replacement part for the oven's gas burner ignition assembly, helping the burner light reliably so your oven can reach and hold cooking temperature. Designed to restore proper ignition function. What it does:

• Provides the ignition pathway and orifice for the oven burner so gas can be lit safely
• Restores consistent ignition when the burner fails to light or lights intermittently
• Can stop clicking or sparking without ignition when the orifice or ignitor is compromised
• Helps produce an appropriate pilot/ignition spark for stable burner operation

• Turn off gas supply and power to the appliance before starting any service
• Inspect surrounding gaskets and fittings for leaks or damage when replacing the part
• Hand-tighten fittings and follow torque guidance from the oven's service manual where applicable

This heating element assembly replaces the oven's main heat source to restore consistent cooking temperatures and baking performance. It heats the oven cavity so food cooks evenly and broils as intended. What it does:

• Converts electrical energy into heat to raise and maintain oven temperature
• Heats during bake and broil cycles to achieve set cooking temperatures
• Commonly linked to uneven cooking, no heat, or oven failing to reach temperature
• Works as the primary heating component inside the oven cavity

• One heating element assembly

• Disconnect power to the appliance before any service; electric shock risk
• Handle element carefully to avoid bending or damaging terminals
• Inspect mounting brackets and insulation; replace damaged components as needed

This is a replacement control knob that restores user control of a range or cooktop function, providing a secure grip for adjusting heat or settings. It's a simple, direct swap for a damaged, worn, or missing knob. What it does

• Lets you turn and set the appliance control smoothly and reliably
• Replaces cracked, stripped, or missing knobs that are hard to grip or won't stay set
• Restores clear tactile feedback and alignment for accurate setting selection
• Helps prevent accidental changes from a broken or loose knob

• Disconnect power to the appliance before servicing to avoid shock or injury
• Pull the old knob straight off the control shaft; match spline orientation before installing the new knob
• Do not force the knob onto the shaft—if it won't seat easily, confirm spline type and shaft condition
• If the control shaft is damaged or the knob slips after installation, inspect the underlying control for further repair

This small plastic clip secures the dishwasher drain hose to the pump assembly or discharge fitting, keeping the hose in place and helping prevent leaks or disconnection during operation. What it does:

• Holds the drain hose firmly to the pump or outlet fitting to maintain a watertight connection
• Prevents the hose from slipping free during drain cycles
• Helps stop water leaks and washing chamber flooding caused by a loose hose
• Useful when replacing a cracked or broken retaining clip

• One drain hose retaining clip

• Disconnect power and water supply before accessing the dishwasher lower access area
• Remove the access panel or kickplate to reach the drain hose and pump connection
• Use pliers or a flat tool to remove the old clip and snap the new clip over the hose/fitting until fully seated
• After installation, run a short drain cycle and inspect for leaks; re-secure if necessary