Fcf366ecb Parts

This cast-iron cooktop grate replaces a worn or damaged burner support so pots and pans sit securely while you cook. It restores a stable surface for cookware and keeps burners properly positioned. What it does:

• Supports cookware above the burner for safe, stable cooking
• Keeps burner caps aligned for consistent flame contact
• Replaces cracked, warped, or heavily chipped grates that cause wobbling
• Helps prevent direct contact between cookware and the cooktop surface

• One replacement cooktop grate

• Allow the range to cool completely before removing or installing the grate
• Most installations are lift-out replacements—no tools required; align over the burner and set in place
• Handle with care; cast-iron grates are heavy and can chip enamel if dropped
• Follow your appliance manual and shut off gas/power to the range

The Element Assembly is an OEM component specifically designed for Frigidaire brand electric ranges. Located beneath the cooktop surface, these resistive elements generate heat for cooking.

Prolonged use causes elements to warp, crack, or lose continuity over time due to normal heating/cooling cycles. Element failure limits cooktop functionality.

Causes of a faulty element relate to typical wear expected of high-temperature filament windings. Accidental damage during cleaning can also impact integrity.

Symptoms involve:

• One or more cooktop zones not heating properly or at all  
• Burned residue indicating heating dysfunction
• Visible cracks or separations in the resistive coils

Replacing with this OEM Frigidaire assembly restores reliable and consistent zoned heating. Compatibility extends to some Kenmore, Gibson, and Electrolux ranges.

Replace a cracked or damaged control panel that exposes internal electronics or prevents button operation. Restores protective front console surface.

This gas supply tube connects the pressure regulator to the safety valve on a gas range, delivering fuel to the oven burner assembly. It is a critical component in the gas delivery system that ensures proper flow between the regulator and the oven safety valve. Replace this tube if you detect a gas odor near the connection points, if the tube shows signs of corrosion or damage, or if the oven fails to ignite properly.

This condenser coil assembly removes heat from the refrigerant so the refrigerator can cool efficiently. Replacing a damaged or clogged condenser restores proper heat transfer and helps the unit run more reliably. What it does:

• Condenses refrigerant from a gas to a liquid by releasing heat to the surrounding air
• Helps maintain correct system pressures so the compressor cycles normally
• Commonly fixes symptoms like the fridge running constantly, higher-than-normal interior temperatures, or overheating at the rear/bottom of the cabinet
• Improves cooling efficiency when the original condenser is bent, crushed, or clogged with debris

• Disconnect power to the appliance before servicing.
• Inspect mounting brackets, lines, and electrical connections during replacement; replace any damaged fasteners or clips.
• Avoid bending fins; straighten with a fin comb if minor damage is present, and ensure adequate ventilation around the condenser after reinstalling.

Freezer not cooling or won't stay cold? This evaporator coil assembly absorbs heat to maintain proper temperatures and keep food frozen.

Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.

Replace a cracked, stripped, or missing range control knob. Attaches to the control shaft for easy setting selection. Restores precise control feel.

This complete outer door assembly replaces a damaged or worn refrigerator/freezer door to restore proper sealing, appearance, and operation. It provides a ready-to-install replacement that aligns with the original cabinet opening and latch points. What it does:

• Replaces a cracked, dented, or warped outer door that prevents proper closing or looks damaged
• Restores proper door alignment and helps the gasket seal evenly (reducing cold-air loss)
• Re-establishes mounting points for hinges, handles, and trim for reliable operation
• Improves appliance appearance by replacing scratched or discolored door surfaces

• Installation typically requires removing hinge fasteners and lifting the old door straight off the hinge pins — support the door to prevent drops or damage
• Reuse any compatible handle/trim when shown; replace hardware if stripped or damaged
• Disconnect power and empty door-mounted items before starting to avoid injury or spills

Replace a faulty gas range control board when your oven won't heat, temperature is inaccurate, or display is unresponsive. Restores electronic functions.

This ignitor/orifice assembly sits at the surface burner and provides both the ignition spark and metered gas flow for clean, reliable light-off. Replace it to restore quick starts and consistent flame quality. What it does:

• Provides the ignition spark at the burner via the electrode
• Meters gas through the fixed orifice to set proper flame size
• Wear, cracks, or blockage here can cause clicking with no flame or a burner that won't light without a match
• A damaged or restricted orifice may lead to small, uneven, or yellow flames

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the cooktop to cool; handle the ceramic electrode carefully to avoid damage
• Transfer any burner-specific hardware as needed and secure the spark lead connection
• After reassembly, restore gas and check all joints for leaks with a soapy-water solution; verify proper spark and flame

Replace a worn, broken, or missing gas range control knob. Installs on the control shaft to select burner heat and oven functions. Restores grip and appearance.

Replace cracked or cloudy oven door inner glass to restore visibility and heat containment. Fits between outer glass and door frame. Confirm fit with model.

Outer trim cover that protects internal components and provides a finished look. Replace if cracked, broken, or missing to restore appearance and shield parts.

This is a 210mm induction coil element that mounts beneath the cooktop's glass surface. It generates an electromagnetic field that heats compatible cookware placed on the corresponding burner zone. Replace this element if the burner zone fails to heat, heats intermittently, or if you receive an error code indicating an element malfunction.