Fcf366ecb Parts

This replacement light lens covers and protects an interior appliance light, restoring a finished look and shielding the bulb from spills and debris. It helps maintain proper light diffusion and prevents direct contact with the bulb. What it does:

• Protects the interior light bulb from food, water and impact
• Diffuses light for more even illumination inside the appliance
• Prevents direct contact with a hot bulb to reduce burn risk
• Replaces cracked, cloudy or missing lenses that cause glare or poor lighting

• One light lens (single piece)

• Disconnect power or unplug the appliance before servicing to avoid shock
• Handle the lens carefully to avoid cracking; use a soft cloth when installing
• If the lens is held by screws or clips, save and reuse the fasteners unless replacement is required

This replacement tube routes water from the refrigerator's defrost area to the drain pan to help prevent leaks and pooling. A simple, direct-fit part for restoring proper drain flow and reducing water buildup. What it does

• Channels defrost and condensation water to the drain pan to prevent interior pooling.
• Helps maintain normal drainage to avoid ice buildup or water leaks.
• Restores a damaged, cracked or clogged original tube where flow is restricted.
• Works as a service part when inspecting drain path during defrost/drain issues.

• One replacement tube.

• Disconnect power to the appliance before starting any repair.
• Remove access panels as needed and route tube along the factory path; avoid sharp bends or kinks.
• Inspect drain openings and heater components while replacing the tube.

This replacement evaporator fan blade helps circulate cold air inside the freezer or refrigerator compartment to maintain even temperatures and proper cooling performance. A direct-fit replacement when the existing blade is cracked, warped, or missing. What it does:

• Moves air across the evaporator to promote even cooling and frost prevention
• Restores proper airflow when a damaged blade causes noise or reduced cooling
• Helps reduce hot or warm spots inside the compartment
• Quiet, balanced operation when installed correctly

• One replacement evaporator fan blade

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing interior panels in the freezer/refrigerator compartment
• Inspect the fan motor shaft and mounting for damage before installing the new blade

This inner oven door glass panel replaces a cracked, chipped or cloudy oven door surface to restore visibility and help maintain proper heat containment. It fits behind the outer door glass and is designed for direct replacement. What it does:

• Replaces damaged or shattered inner oven door glass to restore safe operation and clear viewing
• Helps maintain the oven cavity seal when installed correctly
• Reduces heat loss through the door compared with a broken or missing panel
• Addresses symptoms like visible cracks, broken glass fragments, or reduced visibility into the oven

• Disconnect power to the appliance before starting and allow the oven to cool completely
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Installation typically requires door removal and partial disassembly—follow the manufacturer's service instructions
• If glass is broken, remove shards safely and dispose per local regulations

This replacement tube routes water to the ice maker or dispenser so your appliance can fill ice trays and dispense water reliably. It restores a sealed water path to prevent leaks and ensure proper filling. What it does

• Carries water from the supply or valve to the ice maker or dispenser
• Restores proper ice maker fill and water dispensing when a cracked or clogged tube is causing underfilling
• Helps stop leaks by replacing brittle, split, or deteriorated tubing
• Works with the appliance's existing fittings and clamps to maintain a sealed connection

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting work
• Inspect fittings and clamps; reuse if undamaged or replace with equivalent clamps for a secure seal
• Confirm tube routing matches the original to avoid kinking or interference with moving parts

A small metal mounting screw used to secure appliance panels and internal components. Simple replacement that restores proper fit and reduces rattling or loose parts when the original fastener is missing or damaged. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Holds internal components in place to maintain alignment and function
• Helps prevent vibration noise and movement from loose parts
• Suitable where the OEM listed screw size and thread match the original

• Disconnect power and water before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Keep any removed screws organized to ensure correct reassembly

This control panel replaces the damaged or worn front control surface on compatible ranges and wall ovens, restoring access to buttons and the display for normal operation. It provides the finished trim and mounting surface for the oven's controls. What it does:

• Replaces a cracked, scratched, or discolored control/console surface to improve appearance and usability
• Provides the mounting and interface surface for control buttons, touchpads, and display windows
• Helps restore reliable button actuation and clear viewing of the oven/clock display
• Addresses cosmetic and functional issues where the console is damaged or warped

• One control panel as shown

• Installation requires removing the oven/range backguard or front trim—refer to your service manual for safe disassembly
• Power must be disconnected at the breaker before starting; some panels sit near live wiring
• Handle parts carefully to avoid scratching the finish and to align mounting tabs during reassembly
• If the electronic control or keypad is damaged, verify those components separately; this part is the panel/trim only

This electronic control board manages refrigerator functions and user interface elements so your appliance runs and responds correctly. It replaces a failed control assembly to restore normal electronic control of cooling and front-panel operations. What it does:

• Regulates compressor and fan cycles to control internal temperatures
• Manages user controls, display indicators and input commands
• Controls defrost cycles and related timing functions
• Resolve symptoms like no display response, unresponsive buttons, erratic cooling, or continuous run/no start

• One electronic control board

• Disconnect power before starting any repair to avoid shock or damage
• Handle the board carefully and avoid static discharge; ground yourself before touching electronics
• Verify the part number on your appliance matches before installing

This hot surface igniter is the heated element that lights the bake burner in gas ovens. It provides a reliable glow to ignite gas so the oven can reach and maintain baking temperatures. What it does

• Heats and glows to ignite the oven's bake burner when the control calls for heat.
• Restores normal oven heating when a failed igniter prevents the burner from lighting.
• Common symptoms: oven won't heat, long preheat times, or bake burner not lighting.
• Works with compatible gas oven systems that use a hot surface ignition method.

• One hot surface igniter assembly (single igniter).

• Turn off power and shut off gas supply before beginning any repair.
• Handle the igniter carefully; the element is brittle and can crack if touched or dropped.
• Verify fit and wiring match your appliance before installation.

This electronic control board is the refrigerator's main controller that manages temperature, defrost cycles and user interface signals so the appliance runs reliably and responds to commands. What it does:

• Controls compressor, fans and defrost timing to maintain set temperatures
• Interprets user inputs from the control panel and updates the display
• Triggers defrost cycle and coordinates associated components
• Can cause symptoms such as unresponsive controls, blank or erratic display, or improper cooling when failing

• Disconnect power to the appliance before servicing to avoid electric shock.
• Handle the board by the edges and avoid touching components or connector pins.
• Verify connectors are fully seated and secure before restoring power.

This replacement cover protects and finishes the dispenser housing, restoring a clean appearance and helping keep internal dispenser components shielded from spills and debris. It's a direct-fit exterior trim piece for the dispenser area. What it does:

• Covers and protects the dispenser housing and internal components from spills and debris
• Restores a finished appearance to the dispenser area after damage or wear
• Helps the dispenser door/actuator operate without interference from broken trim
• Commonly used when the dispenser trim is cracked, warped, or missing

• One dispenser housing cover

• Disconnect power to the appliance before beginning any work
• Remove dispenser trim screws or clips, note fastener locations for reassembly
• Handle plastic trim carefully to avoid cracking; align tabs and snap or screw cover into place
• Test dispenser functions after reinstalling power; do not force misaligned parts

This is a replacement mounting nut used to secure components on compatible Frigidaire appliances. It provides a simple, reliable fastener to replace a missing, damaged, or corroded nut and restore proper part retention. What it does

• Secures panels, brackets, or hardware so parts stay in position during use
• Replaces stripped, rusted, or missing nuts that cause rattling or loose components
• Helps restore proper alignment and safe operation of the affected assembly
• Small fastener used wherever the OEM diagram specifies part 561231207

• One mounting nut (part number 561231207)

• Disconnect power or unplug the appliance before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten snugly but do not overtighten to prevent thread damage
• If the original nut was corroded, inspect mating threads and replace the bolt/stud if needed

This round cooktop surface element replaces a worn or damaged electric range burner to restore even heating for stovetop cooking. It provides a direct-fit heating element for compatible Frigidaire electric ranges. What it does:

• Heats cookware on the cooktop for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently heating burner element
• Restores consistent surface temperature for predictable cooking results
• Works with the range's terminal connections and control switch to regulate heat

• One round cooktop surface element

• Disconnect power to the appliance at the breaker before starting any repair
• Remove the cooktop or burner assembly per the range service instructions to access terminals
• Match element terminal configuration and mounting tabs before installing to ensure fit

This replacement mounting screw secures internal parts and panels on compatible Frigidaire appliances, restoring proper fit and reducing rattles or loose components. Simple hardware that helps keep assemblies aligned and stable. What it does:

• Fastens panels, brackets or small components to maintain appliance integrity
• Replaces missing or stripped screws that cause loose panels or vibration noise
• Restores secure connections after repairs or part replacements
• Helps prevent further wear caused by loose assemblies

• One replacement mounting screw as shown

• Disconnect power before working on electrical appliances; follow the manufacturer's safety guidelines
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts or threads
• If screw threads or mating hole are damaged, replace with correct hardware.