Fcf366ecb Parts

This factory-assembled door restores a secure, proper closure on your appliance. Replace a damaged, bent, or non-latching door to bring back safe operation and a clean, factory fit.

• Provides the complete hinged door structure that closes and latches the appliance
• Ensures proper engagement of door switches/latches so the unit operates only when closed
• Maintains correct alignment around the opening for reliable performance
• Replace if the door is cracked, warped, misaligned, won't close or stay shut, or the unit doesn't recognize the door is closed

• Disconnect power before servicing; wear cut-resistant gloves to handle edges
• Support the door during removal/installation; use a second person for larger/heavier doors
• Transfer any model-specific hardware (hinges, screws, trim) from the original door as required
• After installation, check alignment and latch operation; adjust per service information if needed

This 100W radiant element replaces a failed warming element to restore gentle, even heat in the appliance's warmer/drawer. It delivers low-profile radiant heat for keeping food warm between cooking and serving. What it does:

• Radiates low-level heat to maintain food temperature in the warmer or drawer
• Replaces a broken or non-heating warmer element
• Common symptom: warmer drawer not holding temperature or not heating
• Works as the heating element that sits under the warming surface to provide consistent warmth

• Disconnect power to the appliance before attempting service
• Inspect mounting and wiring; replace any damaged connectors or mounting hardware as needed
• Handle the element carefully to avoid bending or damaging the heating surface

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This temperature-sensing probe measures internal appliance temperature and sends readings to the control board so the unit can maintain correct cooling or defrost cycles. Replaces a failed or damaged probe to restore temperature feedback. What it does

• Detects internal temperature and relays it to the control board for accurate cooling and defrost control
• Can cause temperature drift, excessive run times, or failed defrost cycles when faulty
• May trigger temperature-related error codes or cause food to become too warm or too cold
• Works as the control system's feedback element; compatible with the original connector style

• Disconnect power before installing to avoid shock or damage
• Handle the sensor tip and wiring gently; avoid kinking or pulling the lead
• Ensure the connector is fully seated and routed away from moving parts or heating elements

This replacement cap covers and protects exposed fasteners and trim on compatible Frigidaire appliances, restoring a finished appearance while helping keep out dirt and moisture. A simple, low-cost part for cosmetic and protective repair. What it does:

• Covers exposed fasteners, hinge posts, or trim edges to restore the appliance's finished look
• Helps prevent dirt, debris and moisture from entering mounting points and seams
• Can reduce rattling or vibration caused by missing or damaged trim pieces
• Snaps or presses into place to conceal hardware without altering function

• Typically installs by snapping into position; no special tools usually required
• Work with the appliance powered off if accessing areas near electrical components
• Inspect mating surfaces for damage or debris before installing for a secure fit
• Replace with identical OEM cap for correct fit and appearance

This glide is a replacement drawer support that restores smooth, stable opening and closing for refrigerator/freezer drawers. It helps keep the drawer aligned and reduces sticking or rough movement. What it does:

• Supports the drawer on its track so it slides smoothly and stays level
• Replaces a worn, cracked or missing glide that causes catching or binding
• Helps reduce grinding, scraping or noisy operation when opening/closing the drawer
• Restores proper alignment so the drawer seats fully and seals correctly

• Disconnect power to the appliance or remove food before servicing for safety
• Remove the drawer and old glide per the appliance's disassembly instructions
• Slide or snap the new glide into the existing track; confirm proper engagement before reinstalling the drawer
• No special tools typically required;

This defrost drain adapter funnels melted defrost water from the evaporator area into the refrigerator's drain channel, helping prevent water pooling and evaporator-area leaks. A simple replacement to restore proper drain flow. What it does:

• Directs defrost meltwater into the cabinet drain to prevent pooling under the evaporator.
• Helps stop water from leaking into the refrigerator or freezer compartment.
• Can reduce odor and residue caused by standing water in the drain area.
• Fits the drain/chest drain opening and mates to the cabinet drain tubing.

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing interior panels or the evaporator cover—keep screws and fasteners organized.
• Clean the drain channel and line of any ice or debris before installing the adapter to ensure proper flow.
• Reconnect power and test by pouring a small amount of warm water into the evaporator area to ensure the drain is routing properly.

This glide is a replacement drawer slide that restores smooth opening and closing for refrigerator/freezer drawers and deli drawers. It helps stabilize the drawer and prevents binding or uneven movement for easier access. What it does:

• Guides and supports the drawer to ensure smooth in-and-out motion
• Replaces worn or broken slide surfaces that cause sticking or grinding
• Helps keep the drawer level so contents don't shift when opened
• Reduces drawer wobble and prevents the drawer from coming off its track

• Disconnect power to the appliance or remove the drawer per the manufacturer instructions before starting
• Remove the old glide hardware (retain any reusable screws) and position the new glide in the same orientation
• Use common hand tools (screwdriver) and avoid overtightening fasteners
• Check the mate glide/tracks and drawer alignment

This blower motor assembly circulates air through the evaporator and freezer compartment to maintain even cooling and proper frost control. Replacing a worn motor restores airflow and helps keep temperatures consistent. What it does

• Spins the evaporator fan to move cold air through the freezer and refrigerator sections.
• Restores proper airflow when the fan motor is worn, noisy, or not running.
• Helps prevent warm spots, frost buildup, and longer run cycles caused by poor circulation.
• Reduces abnormal noise from a failing blower motor or imbalanced fan blade.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blade carefully to avoid bending or damage; keep fingers and tools clear while testing.
• After installation, verify the fan spins freely and the appliance returns to normal temperature and noise levels.

This mechanical temperature control thermostat regulates refrigerator/freezer temperature by cycling the compressor and fans. It restores proper temperature control so the appliance can maintain set cooling levels. What it does:

• Senses cabinet temperature and opens/closes the control circuit to start or stop the compressor
• Helps prevent the refrigerator from running continuously or failing to cool
• Can cause intermittent cooling, incorrect temperature, or no compressor operation when failing
• Works as the user-accessible temperature control in many top- and front-control refrigerators

• Always disconnect power to the appliance before beginning service
• Located behind the control panel or inside the cabinet; gentle removal of trim may be required
• Take note of wire locations or take a photo before disconnecting electrical connections
• Test compatibility and function using a multimeter

This small mounting clip secures interior or cabinet components to keep panels and trim stable, helping reduce noise and maintain proper alignment. It's a simple replacement that restores a snug fit where the original clip has broken or worn. What it does:

• Holds panels, trim, or small components in place to prevent gaps or rattling
• Restores proper alignment of clipped parts after damage or wear
• Maintains a secure attachment point for adjacent parts during normal use
• Helps prevent moisture or debris from entering behind secured panels

• Disconnect power or unplug the appliance before accessing internal components
• Handle the clip and surrounding trim carefully to avoid cracking adjacent plastic
• Use basic hand tools as needed; do not force clips into place—align before snapping
• Replace any damaged mounting features for a secure fit

This power cord supplies electrical power to the appliance, restoring a safe, factory-style connection between the outlet and the unit. Use it to replace a damaged or worn lead to regain reliable power. What it does:

• Replaces a worn, frayed or damaged power lead to stop intermittent power or visible cord damage
• Restores a secure electrical connection when the original cord is cut, melted or has exposed wires
• Helps eliminate power-related failures caused by broken conductors or loose cord terminals
• Works as the external mains connection between the appliance and household power

• One power cord

• Always unplug the appliance or switch off house power at the breaker before replacing the cord
• Verify the cord's terminal type and wire count match your appliance before installation
• Tighten terminal connections to the manufacturer's specified torque and secure strain relief where provided

This oven bake element heats the interior of an electric oven for baking and roasting, restoring proper cooking temperatures and even heat distribution when the original element fails. What it does:

• Heats the oven cavity to produce consistent bake and roast temperatures.
• Replaces a cracked, burned, or nonfunctional bake element.
• Helps resolve symptoms such as oven not reaching set temperature, uneven baking, or visible element damage.
• Works with the oven's temperature controls and broil/bake circuits as the primary lower heating element.

• Disconnect power to the appliance at the breaker or unplug before attempting installation.
• Handle the element carefully to avoid bending or damaging the terminals and mounting flange.
• Verify fit and terminal type match your oven before finalizing installation.